Cytotoxicity of intracanal dressings on apical papilla cells differ upon activation with E. faecalis LTA

Objective: The aim of this study was to investigate the cytotoxic effects of modified triple antibiotic paste and an experimental composition using calcium hydroxide on lipoteichoic acid (LTA)-primed apical papilla cells (APC). Material and Methods: Human APC were tested for in vitro cytotoxicity of modified Triple Antibiotic Paste (mTAP – Ciprofloxacin, Metronidazole and Cefaclor at 1:1:1) and of a paste of Ciprofloxacin, Metronidazole and Calcium hydroxide (CMC – 1:1:2) and modified CMC (mCMC – 2:2:1) by using MTT assay. The substances were reconstituted in DMEM at 1,000 µg/mL and ¼ serially diluted before being kept in contact with cells for 1, 3, 5 and 7 days. Further, cells were primed with 1 µg/mL of Enterococcus faecalis LTA for 7 days prior to the viability test with 1,000 µg/mL of each substance. Statistical analysis was performed using one-way analysis of variance (ANOVA) and two-way ANOVA respectively followed by Tukey’s post-test. Significance levels were set at p<0.05. Results: In the first assay, the higher cytotoxic rates were reached by mTAP for all experimental periods. CMC was found toxic for APC at 5 and 7 days, whereas mCMC did not affect the cell viability. Only CMC and mCMC were able to induce some cellular proliferation. In the second assay, when considering the condition with medium only, LTA-primed cells significantly proliferated in comparison to LTA-untreated ones. At this context, mTAP and CMC showed similar cytotoxicity than the observed for LTA-untreated cells, while mCMC was shown cytotoxic at 7 days only for LTA-primed APC. Comparing the medications, mTAP was more cytotoxic than CMC and mCMC. Conclusion: mTAP showed higher cytotoxicity than CMC and mCMC and the effect of topic antimicrobials might differ when tested against apical papilla cells under physiological or activated conditions

Influence of Apical Patency on the Adaptation of the Master Filling Cone: A Cone-beam Computed Tomography Assessment

Introduction: This study aimed to evaluate if the apical patency can influence the adaptation of the master cone of gutta-percha, quantifying the volume of voids and areas at the last 2 mm of the working length (WL). Materials and Methods: Sixty distobuccal canals of extracted upper molars were divided into 3 groups (n=20) based on the patency length (A: passed 1 mm beyond the apical foramen (AF), B: at the AF and C: 1 mm short of the AF) with the Easy ProDesign Logic 25/0.01 file. Each group was subdivided into 2 subgroups (n=10) based on the WL established to prepare the root canal (1: 1 mm short of the AF or 2: at the AF) with the Easy ProDesign Logic 25/0.05 file. After the scan, void volumes were calculated from the last 2 mm of the WL and void areas at 0 mm, 1 mm and 2 mm of the last of WL, as well as the relation between the tip and taper of the master cone with the amount of void volume and areas. To investigate statistically significant differences, we used the Kruskal-Wallis statistical test. Results: There were more voids in volume when patency was achieved 1 mm beyond the AF and the root canal preparation was conducted at 1mm short of the AF (A1 group). Furthermore, the same group showed more voids areas, mainly on the last millimeter of WL. Conclusion: Achieving apical patency at 1 mm beyond the AF followed by instrumentation 1 mm short of the AF created more voids between the master gutta-percha cone and the root canal wall, especially on the last millimeter of WL

Root canal dressings for revascularization influence in vitro mineralization of apical papilla cells

Endodontic revascularization is based on cell recruitment into the necrotic root canal of immature teeth after chemical disinfection. The clinical outcome depends on the ability of surviving cells from the apical tissue to differentiate and promote hard tissue deposition inside the dentinal walls. Objective: To investigate the effect of calcium hydroxide (CH) and modified triple antibiotic paste (mTAP – ciprofloxacin, metronidazole and cefaclor) on the viability and mineralization potential of apical papilla cells (APC) in vitro. Material and Methods: APC cultures were kept in contact with CH or mTAP (250-1000 µg/mL) for 5 days, after which cell viability was assessed using 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Next, APCs were subjected to CH or mTAP at 250 µg/mL for 5 days before inducing the differentiation assay. After 14 and 21 days, calcium deposition was assessed by the Alizarin Red S staining method, followed by elution and quantification using spectrophotometry. Data were analyzed using ANOVA followed by Tukey post hoc test. Results: CH induced cell proliferation, whereas mTAP showed significant cytotoxicity at all concentrations tested. APC treated with CH demonstrated improved mineralization capacity at 14 days, while, for mTAP, significant reduction on the mineralization rate was observed for both experimental periods (14 and 21 days). Conclusion: Our findings showed that CH induces cell proliferation and improves early mineralization, whereas mTAP wa

Micro-CT Evaluation of Gutta-Percha Removal by Two Retreatment Systems

Introduction: The aim of the present ex vivo research was to compare the remaining filling material and the volumes of dentine removed after retreatment of curved canals with two rotary systems naming ProTaper Universal Retreatment and Mani NRT-GPR using micro-computed tomography (micro-CT). Material and Methods: Forty mandibular molars containing two completely separated canals, with curvature angle of 25-35° and a curvature radius <10 mm were prepared to the Mtwo instrument 35/0.04 and filled with warm gutta-percha and AH-Plus sealer. The teeth were randomly divided into 2 groups (n=20), according to the retreatment system evaluated: ProTaper Universal Retreatment (PR group) or Mani NRT-GPR (MR group). Retreatment was considered complete when the working length was reached and when smooth dentinal walls were observed, with no evidence of filling material adhered to instruments or in the irrigating solution. Preoperative and postoperative micro-CT images were obtained with an isotropic voxel size of 11.88 µm to observe the volume of residual filling material in the canals and dentine removed after retreatment. Statistical analysis was performed by Student’s t-test (P<0.05). Results: The mean percentage of remaining filling material was 12.96% for PR group and 24.26% for MR group (P=0.0056). The percentage of dentin removal was greater in the PR group (5.02%) than MR group (1.36%) (P=0.0028). Both systems failed to completely remove the filling material from the canals. Conclusion: ProTaper Universal Retreatment system was more effective than Mani NRT-GPR system regarding removal of root filling material and also removed significantly more dentine after retreatment of curved mesial root canals of mandibular molars.Keywords: Dental Instruments; Endodontics; Gutta-Percha; Endodontic Retreatment

Performance Comparison of Artificial Intelligence and Human Operators in the Detection of Periapical Bone Rarefactions Using Panoramic Radiographs

Periapical bone rarefactions are one of the most common radiographic findings in dentistry, which are associated with potential pathologies such as cysts or resulting from apical periodontitis due to root canal infection. If not detected early and accurately, they can lead to intense pain, swelling, persistent root canal infection, and even tooth loss. Regarding complementary examinations, the most commonly used for dental documentation to this day is radiographic examination, particularly periapical, panoramic, occlusal, and interproximal radiographs, each serving different purposes. Therefore, considering the importance of early diagnosis of periapical rarefactions and accurate interpretation of radiographic images, this project aims to compare the accuracy of tagging periapical radiolucent changes in panoramic radiographs between humans with different levels of expertise and an artificial intelligence-based program. Human operators will be divided into groups based on their cognitive experience in the fields of endodontics and radiology, as well as their clinical experience, conducting visual analysis of radiographs and comparing it with the analysis performed by a software capable of identifying radiographic findings through computer vision

Cytotoxicity of intracanal dressings on apical papilla cells differ upon activation with E. faecalis LTA

Abstract Objective The aim of this study was to investigate the cytotoxic effects of modified triple antibiotic paste and an experimental composition using calcium hydroxide on lipoteichoic acid (LTA)-primed apical papilla cells (APC). Material and Methods Human APC were tested for in vitro cytotoxicity of modified Triple Antibiotic Paste (mTAP – Ciprofloxacin, Metronidazole and Cefaclor at 1:1:1) and of a paste of Ciprofloxacin, Metronidazole and Calcium hydroxide (CMC – 1:1:2) and modified CMC (mCMC – 2:2:1) by using MTT assay. The substances were reconstituted in DMEM at 1,000 µg/mL and ¼ serially diluted before being kept in contact with cells for 1, 3, 5 and 7 days. Further, cells were primed with 1 µg/mL of Enterococcus faecalis LTA for 7 days prior to the viability test with 1,000 µg/mL of each substance. Statistical analysis was performed using one-way analysis of variance (ANOVA) and two-way ANOVA respectively followed by Tukey’s post-test. Significance levels were set at p<0.05. Results In the first assay, the higher cytotoxic rates were reached by mTAP for all experimental periods. CMC was found toxic for APC at 5 and 7 days, whereas mCMC did not affect the cell viability. Only CMC and mCMC were able to induce some cellular proliferation. In the second assay, when considering the condition with medium only, LTA-primed cells significantly proliferated in comparison to LTA-untreated ones. At this context, mTAP and CMC showed similar cytotoxicity than the observed for LTA-untreated cells, while mCMC was shown cytotoxic at 7 days only for LTA-primed APC. Comparing the medications, mTAP was more cytotoxic than CMC and mCMC. Conclusion mTAP showed higher cytotoxicity than CMC and mCMC and the effect of topic antimicrobials might differ when tested against apical papilla cells under physiological or activated conditions

Clinical Diagnosis of Pulp Inflammation Based on Pulp Oxygenation Rates Measured by Pulse Oximetry

Introduction: The objective of this study was to investigate correlations between pulp oxygenation rates (%SpO(2)) and clinical diagnoses of reversible pulpitis (RP), irreversible pulpitis (IP), or pulp necrosis (PN). Methods: Sixty patients who presented with a tooth with endodontic pathology were grouped according to a clinical diagnosis of either RP (n = 20), IP (n = 20), or PN (n = 20). The clinical diagnosis was based on the patient's dental history, periapical radiographs, clinical inspection, and percussion and thermal sensitivity testing. Pulse oximetry (PO) was used to determine pulp oxygenation rates. For every patient, one additional endodontically treated tooth (negative control [NC], n = 60) and one additional healthy tooth with healthy pulp status (positive control [PC], n = 60) were evaluated. Analysis of variance, the Tukey HSD test, and the Student's t test were used for statistical analysis. Results: The mean % SpO(2) levels were as follows: RP: 87.4% (standard deviation [SD] +/- 2.46), IP: 83.1% (SD +/- 2.29), PN: 74.6% (SD +/- 1.96), PC: 92.2% (SD +/- 1.84), and NC: 0% (SD +/- 0.0). There were statistically significant differences between RP, IP, and PM compared with NC and PC and between RP, IP, and PN (all P &lt;= .01). Conclusions: The evaluation of pulp oxygenation rates by PO may be a useful tool to determine the different inflammatory stages of the pulp to aid in endodontic diagnosis. (JEndod 2012;38:880-883

Effect of different torques in cyclic fatigue resistance of K3 rotary instruments

Abstract Aim: To assess the effect of different torque values on cyclic fatigue resistance of K3 rotary nickeltitanium (NiTi) files. Methods: Eighty K3 files, size 25 mm, taper 0.04 were divided in 4 groups according to different torques (0.5, 1, 2 and 6 Ncm) and were submitted to a cyclic fatigue test. This test was performed with a device that allowed the file to rotate inside a stainless steel artificial curved canal, simulating the pecking motion. Files rotated until fracture occurred and time to failure was recorded in seconds with a stopwatch. Data were analyzed by ANOVA and Tukey tests (p&lt;0.05). Results: All groups were compared and only the group of 6 N.cm showed statistically significant difference (p=0.0002). Conclusions: For #25.04 K3 files, the evaluated torques up to 2 N.cm had no influence on cyclic fatigue resistance. Using 6 N.cm torque value resulted in lower resistance to cyclic fatigue

Resistance to Flexural Fatigue of Reciproc R25 Files under Continuous Rotation and Reciprocating Movement

Introduction: The aim of the present work was to evaluate the resistance to flexural fatigue of Reciproc R25 nickel-titanium files, 25 mm, used in continuous rotation motion or reciprocation motion, in dynamic assays device. Methods: Thirty-six Reciproc R25 files were divided into 2 groups (n = 18) according to kinematics applied, continuous rotary (group CR) and reciprocation motion (group RM). The files were submitted to dynamic assays device moved by an electric engine with 300 rpm of speed that permitted the reproduction of pecking motion. The files run on a ring's groove of temperate steel, simulating instrumentation of a curved root canal with 400 and 5 mm of curvature radius. The fracture of file was detected by sensor of device, and the time was marked. The data were analyzed statistically by Student's t test, with level of significance of 95%. Results: The instruments moved by reciprocating movement reached significantly higher numbers of cycles before fracture (mean, 1787.78 cycles) when compared with instruments moved by continuous rotary (mean, 816.39 cycles). Conclusions: The results showed that the reciprocation motion improves flexural fatigue resistance in nickel-titanium instrument Reciproc R25 when compared with continuous rotation movement. (J Endod 2012;38:684-687

Effect of different torques in cyclic fatigue resistance of K3 rotary instruments

assess the effect of different torque values on cyclic fatigue resistance of K3 rotary nickeltitanium (NiTi) files. Methods: Eighty K3 files, size 25 mm, taper 0.04 were divided in 4 groups according to different torques (0.5, 1, 2 and 6 Ncm) and were submitted to a cyclic fatigue test. This test was performed with a device that allowed the file to rotate inside a stainless steel artificial curved canal, simulating the pecking motion. Files rotated until fracture occurred and time to failure was recorded in seconds with a stopwatch. Data were analyzed by ANOVA and Tukey tests (p<0.05). Results: All groups were compared and only the group of 6 N.cm showed statistically significant difference (p=0.0002). Conclusions: For #25.04 K3 files, the evaluated torques up to 2 N.cm had no influence on cyclic fatigue resistance. Using 6 N.cm torque value resulted in lower resistance to cyclic fatigue