Rab8 binding to immune cell-specific adaptor LAX facilitates formation of trans-Golgi network-proximal CTLA-4 vesicles for surface expression.

Despite playing a central role in tolerance, little is known regarding the mechanism by which intracellular CTLA-4 is shuttled from the trans-Golgi network to the surfaces of T cells. In this context, Ras-related GTPase Rab8 plays an important role in the intracellular transport, while we have previously shown that CTLA-4 binds to the immune cell adaptor TRIM in T cells. In this study, we demonstrate that CTLA-4 forms a multimeric complex comprised of TRIM and related LAX that in turn binds to GTP bound Rab8 for post-Golgi transport to the cell surface. LAX bound via its N terminus to active GTP-Rab8, as well as the cytoplasmic tail of CTLA-4. TRIM required LAX for binding to Rab8 in a complex. Wild-type LAX or its N terminus (residues 1 to 77) increased CTLA-4 surface expression, whereas small interfering RNAs of Rab8 or LAX or disruption of LAX/Rab8 binding reduced numbers of CTLA-4-containing vesicles and its coreceptor surface expression. LAX also promoted the polarization of CTLA-4 and the reorientation of the microtubule-organizing center to the site of T-cell receptor engagement. Our results identify a novel CTLA-4/TRIM/LAX/Rab8 effector complex in the transport of CTLA-4 to the surfaces of T cells

Regional diversity in the murine cortical vascular network is revealed by synchrotron X-ray tomography and is amplified with age

Cortical bone is permeated by a system of pores, occupied by the blood supply and osteocytes. With ageing, bone mass reduction and disruption of the microstructure are associated with reduced vascular supply. Insight into the regulation of the blood supply to the bone could enhance the understanding of bone strength determinants and fracture healing. Using synchrotron radiation-based computed tomography, the distribution of vascular canals and osteocyte lacunae was assessed in murine cortical bone and the influence of age on these parameters was investigated. The tibiofibular junction from 15-week- and 10-month-old female C57BL/6J mice were imaged post-mortem. Vascular canals and three-dimensional spatial relationships between osteocyte lacunae and bone surfaces were computed for both age groups. At 15 weeks, the posterior region of the tibiofibular junction had a higher vascular canal volume density than the anterior, lateral and medial regions. Intracortical vascular networks in anterior and posterior regions were also different, with connectedness in the posterior higher than the anterior at 15 weeks. By 10 months, cortices were thinner, with cortical area fraction and vascular density reduced, but only in the posterior cortex. This provided the first evidence of age-related effects on murine bone porosity due to the location of the intracortical vasculature. Targeting the vasculature to modulate bone porosity could provide an effective way to treat degenerative bone diseases, such as osteoporosis

Nephropathic cystinosis associated with cardiomyopathy: A 27-year clinical follow-up

BACKGROUND: Nephropathic cystinosis is an autosomal recessive disease resulting from intracellular accumulation of cystine leading to multiple organ failure. CASE REPORT: We describe the clinical course of a patient managed from the age of six until his death at the age of 33 years. He underwent multiple surgery, including two renal transplants, developed transplant renal artery stenosis that was managed medically, and progressive heart failure at the age of 33 years. His death from a ruptured pseudoaneurysm associated with a restrictive cardiomyopathy is noteworthy. A limited cardiac autopsy revealed the presence of cystine crystals in interstitial cardiac histiocytes and one myocardial cell, along with 1000-fold higher tissue cystine content of the left ventricular myocardium compared to patients without cystinosis, suggesting the possibility of direct cystine mediated metabolic injury

The Blueprint for Rabies Prevention and Control: A Novel Operational Toolkit for Rabies Elimination

Rabies is a prime example of a neglected tropical disease that mostly affects communities suffering from inequitable health care [1]. The false perception that rabies impacts on society are low is due to case under-reporting and limited awareness of the disease burden [2], [3]. Effective tools for elimination of terrestrial rabies are available [4]. While the sustained deployment of these tools has led to some remarkably successful interventions [5], [6], canine rabies continues to claim lives in rabies-endemic countries and areas of re-emergence, where >95% of human deaths occur as a result of bites by rabid domestic dogs [7], [8]. Control programs targeting dogs can effectively reduce the risk of rabies to humans [3], [9]. However, the design and implementation of such programs still pose considerable challenges to local governments, and a lack of easy-to-use guidelines has been identified as an important reason for this

Communicating personalised risks from COVID-19: guidelines from an empirical study

As increasing amounts of data accumulate on the effects of the novel coronavirus Sars-CoV-2 and the risk factors that lead to poor outcomes, it is possible to produce personalised estimates of the risks faced by groups of people with different characteristics. The challenge of how to communicate these then becomes apparent. Based on empirical work (total n=5,520, UK) supported by in-person interviews with the public and physicians, we make recommendations on the presentation of such information. These include: using predominantly percentages when communicating the absolute risk, but also providing, for balance, a format which conveys a contrasting (higher) perception of risk (expected frequency out of 10,000); using a visual linear scale cut at an appropriate point to illustrate the maximum risk, explained through an illustrative ‘persona’ who might face that highest level of risk; and providing context to the absolute risk through presenting a range of other ‘personas’ illustrating people who would face risks of a wide range of different levels. These ‘personas’ should have their major risk factors (age, existing health conditions) described. By contrast, giving people absolute likelihoods of other risks they face in an attempt to add context was considered less helpful

Machine and human observable differences in groups’ collaborative problem-solving behaviours

This paper contributes to our understanding of how to design learning analytics to capture and analyse collaborative problem-solving (CPS) in practice-based learning activities. Most research in learning analytics focuses on student interaction in digital learning environments, yet still most learning and teaching in schools occurs in physical environments. Investigation of student interaction in physical environments can be used to generate observable differences among students, which can then be used in the design and implementation of Learning Analytics. Here, we present several original methods for identifying such differences in groups CPS behaviours. Our data set is based on human observation, hand position (fiducial marker) and heads direction (face recognition) data from eighteen students working in six groups of three. The results show that the high competent CPS groups spend an equal distribution of time on their problem-solving and collaboration stages. Whereas, the low competent CPS groups spend most of their time in identifying knowledge and skill deficiencies only. Moreover, as machine observable data shows, high competent CPS groups present symmetrical contributions to the physical tasks and present high synchrony and individual accountability values. The findings have significant implications on the design and implementation of future learning analytics systems

Review of Journal of Cardiovascular Magnetic Resonance 2014

There were 102 articles published in the Journal of Cardiovascular Magnetic Resonance (JCMR) in 2014, which is a 6 % decrease on the 109 articles published in 2013. The quality of the submissions continues to increase. The 2013 JCMR Impact Factor (which is published in June 2014) fell to 4.72 from 5.11 for 2012 (as published in June 2013). The 2013 impact factor means that the JCMR papers that were published in 2011 and 2012 were cited on average 4.72 times in 2013. The impact factor undergoes natural variation according to citation rates of papers in the 2 years following publication, and is significantly influenced by highly cited papers such as official reports. However, the progress of the journal’s impact over the last 5 years has been impressive. Our acceptance rate is <25 % and has been falling because the number of articles being submitted has been increasing. In accordance with Open-Access publishing, the JCMR articles go on-line as they are accepted with no collating of the articles into sections or special thematic issues. For this reason, the Editors have felt that it is useful once per calendar year to summarize the papers for the readership into broad areas of interest or theme, so that areas of interest can be reviewed in a single article in relation to each other and other recent JCMR articles. The papers are presented in broad themes and set in context with related literature and previously published JCMR papers to guide continuity of thought in the journal. We hope that you find the open-access system increases wider reading and citation of your papers, and that you will continue to send your quality papers to JCMR for publication

Communicating personalized risks from COVID-19: guidelines from an empirical study.

As increasing amounts of data accumulate on the effects of the novel coronavirus SARS-CoV-2 and the risk factors that lead to poor outcomes, it is possible to produce personalized estimates of the risks faced by groups of people with different characteristics. The challenge of how to communicate these then becomes apparent. Based on empirical work (total n = 5520, UK) supported by in-person interviews with the public and physicians, we make recommendations on the presentation of such information. These include: using predominantly percentages when communicating the absolute risk, but also providing, for balance, a format which conveys a contrasting (higher) perception of risk (expected frequency out of 10 000); using a visual linear scale cut at an appropriate point to illustrate the maximum risk, explained through an illustrative 'persona' who might face that highest level of risk; and providing context to the absolute risk through presenting a range of other 'personas' illustrating people who would face risks of a wide range of different levels. These 'personas' should have their major risk factors (age, existing health conditions) described. By contrast, giving people absolute likelihoods of other risks they face in an attempt to add context was considered less helpful. We note that observed effect sizes generally were small. However, even small effects are meaningful and relevant when scaled up to population levels

Predictive modeling of die filling of the pharmaceutical granules using the flexible neural tree

In this work, a computational intelligence (CI) technique named flexible neural tree (FNT) was developed to predict die filling performance of pharmaceutical granules and to identify significant die filling process variables. FNT resembles feedforward neural network, which creates a tree-like structure by using genetic programming. To improve accuracy, FNT parameters were optimized by using differential evolution algorithm. The performance of the FNT-based CI model was evaluated and compared with other CI techniques: multilayer perceptron, Gaussian process regression, and reduced error pruning tree. The accuracy of the CI model was evaluated experimentally using die filling as a case study. The die filling experiments were performed using a model shoe system and three different grades of microcrystalline cellulose (MCC) powders (MCC PH 101, MCC PH 102, and MCC DG). The feed powders were roll-compacted and milled into granules. The granules were then sieved into samples of various size classes. The mass of granules deposited into the die at different shoe speeds was measured. From these experiments, a dataset consisting true density, mean diameter (d50), granule size, and shoe speed as the inputs and the deposited mass as the output was generated. Cross-validation (CV) methods such as 10FCV and 5x2FCV were applied to develop and to validate the predictive models. It was found that the FNT-based CI model (for both CV methods) performed much better than other CI models. Additionally, it was observed that process variables such as the granule size and the shoe speed had a higher impact on the predictability than that of the powder property such as d50. Furthermore, validation of model prediction with experimental data showed that the die filling behavior of coarse granules could be better predicted than that of fine granules

Improving statistical inference on pathogen densities estimated by quantitative molecular methods: malaria gametocytaemia as a case study

BACKGROUND: Quantitative molecular methods (QMMs) such as quantitative real-time polymerase chain reaction (q-PCR), reverse-transcriptase PCR (qRT-PCR) and quantitative nucleic acid sequence-based amplification (QT-NASBA) are increasingly used to estimate pathogen density in a variety of clinical and epidemiological contexts. These methods are often classified as semi-quantitative, yet estimates of reliability or sensitivity are seldom reported. Here, a statistical framework is developed for assessing the reliability (uncertainty) of pathogen densities estimated using QMMs and the associated diagnostic sensitivity. The method is illustrated with quantification of Plasmodium falciparum gametocytaemia by QT-NASBA. RESULTS: The reliability of pathogen (e.g. gametocyte) densities, and the accompanying diagnostic sensitivity, estimated by two contrasting statistical calibration techniques, are compared; a traditional method and a mixed model Bayesian approach. The latter accounts for statistical dependence of QMM assays run under identical laboratory protocols and permits structural modelling of experimental measurements, allowing precision to vary with pathogen density. Traditional calibration cannot account for inter-assay variability arising from imperfect QMMs and generates estimates of pathogen density that have poor reliability, are variable among assays and inaccurately reflect diagnostic sensitivity. The Bayesian mixed model approach assimilates information from replica QMM assays, improving reliability and inter-assay homogeneity, providing an accurate appraisal of quantitative and diagnostic performance. CONCLUSIONS: Bayesian mixed model statistical calibration supersedes traditional techniques in the context of QMM-derived estimates of pathogen density, offering the potential to improve substantially the depth and quality of clinical and epidemiological inference for a wide variety of pathogens