Hydrogen etching mechanism in nitrogen implanted iron alloys studied with in situ photoemission electron spectroscopy

In situ photoemission electron spectroscopy (XPS) is used to elucidate the hydrogen etching mechanism in nitrogen implanted iron alloys. The samples were prepared by bombarding stainless steel with a broad nitrogen ion source in a high vacuum chamber. The photoemission spectra evolution on increasing hydrogen ion current is correlated with the nitrided surface properties. The presence of hydrogen is associated with oxygen removal, augmenting the surface nitrogen concentration. The total active sites at the surface are constant, i.e., oxygen competes with nitrogen sites on the surface. The absorbed oxygen is etched following a linear law on hydrogen ion flux. Simultaneously, the formation of metallic nitrides is enhanced. At the working temperature, the efficiency of the process is determined by a characteristic time that depends on hydrogen retention time, water formation and desorption time. (c) 2005 American Vacuum Society.235L9L1

Extrastriate projections in human visual system: Evidence from fMRI-informed tractography

The human optic radiation (OR) is the main pathway for conveying visual input to occipital cortex, but it is unclear whether it projects beyond primary visual cortex (V1). In this study, we used functional MRI mapping to delineate early visual areas in 30 healthy volunteers and determined the termination area of the OR as reconstructed with diffusion tractography. Direct thalamo-cortical projections to areas V2 and V3 were found in all hemispheres tested, with a distinct anatomical arrangement of superior–inferior fiber placement for dorsal and ventral projections, respectively, and a medio-lateral nesting arrangement for projections to V1, V2 and V3. Finally, segment-specific microstructure was examined, revealing sub-fascicular information. This is to date the first in vivo demonstration of direct extrastriate projections of the OR in humans

Variability of the intensity of the Tsushima Warm Current and bottom water ventilation in western North Pacific marginal seas during the Pleistocene: preliminary results from IODP Expedition 346 (Sites U1427 and U1428) based on ostracod assemblages

Blue posters: no. EGU2015-14259IODP Expedition 346 drilled Sites U1427 and U1428 in ideal locations to monitor changes in (i) the intensity of the influx of the Tsushima Warm Current (TWC), and (ii) the intermediate bottom water ventilation from a few hundred thousand years to over a million years in the western North Pacific marginal seas. Site U1427 is located at 330 m water depth in the marginal sea bordered by the Eurasian continent, the Korean peninsula and the Japanese Islands. This semi-enclosed marginal sea has an average water depth of 1350 m and is connected with other marginal seas in the region by shallow, narrow straits. Site U1428 is located at 724 m in the East China Sea and this region is more influenced by continental freshwater runoff derived from the Yangtze River. Both sites are in the path of the TWC, a branch of the Kuroshio Current, the only warm current flowing into …published_or_final_versio

Enhanced nitrogen diffusion induced by atomic attrition

The nitrogen diffusion in steel is enhanced by previous atomic attrition with low energy xenon ions. The noble gas bombardment generates nanoscale texture surfaces and stress in the material. The atomic attrition increases nitrogen diffusion at lower temperatures than the ones normally used in standard processes. The stress causes binding energy shifts of the Xe 3d(5/2) electron core level. The heavy ion bombardment control of the texture and stress of the material surfaces may be applied to several plasma processes where diffusing species are involved. (c) 2006 American Institute of Physics.882

A Pathway From Porous Particle Technology Toward Tailoring Aerogels for Pulmonary Drug Administration

Pulmonary drug delivery has recognized benefits for both local and systemic treatments. Dry powder inhalers (DPIs) are convenient, portable and environmentally friendly devices, becoming an optimal choice for patients. The tailoring of novel formulations for DPIs, namely in the form of porous particles, is stimulating in the pharmaceutical research area to improve delivery efficiency. Suitable powder technological approaches are being sought to design such formulations. Namely, aerogel powders are nanostructured porous particles with particularly attractive properties (large surface area, excellent aerodynamic properties and high fluid uptake capacity) for these purposes. In this review, the most recent development on powder technologies used for the processing of particulate porous carriers are described via updated examples and critically discussed. A special focus will be devoted to the most recent advances and uses of aerogel technology to obtain porous particles with advanced performance in pulmonary delivery.Work carried out in the framework of COST Action CA18125 “Advanced Engineering and Research of aeroGels for Environment and Life Sciences” (AERoGELS), funded by the European Commission. This work was also supported by Xunta de Galicia [ED431C 2020/17], MCIUN [RTI2018-094131-AI00], Agencia Estatal de Investigación [AEI], and FEDER funds. CG-G acknowledges to MINECO for a Ramón y Cajal Fellowship [RYC2014-15239]

Oxygen etching mechanism in carbon-nitrogen (CNx) domelike nanostructures

We report a comprehensive study involving the ion beam oxygen etching purification mechanism of domelike carbon nanostructures containing nitrogen. The CNx nanodomes were prepared on Si substrate containing nanometric nickel islands catalyzed by ion beam sputtering of a carbon target and assisting the deposition by a second nitrogen ion gun. After preparation, the samples were irradiated in situ by a low energy ion beam oxygen source and its effects on the nanostructures were studied by x-ray photoelectron spectroscopy in an attached ultrahigh vacuum chamber, i.e., without atmospheric contamination. The influence of the etching process on the morphology of the samples and structures was studied by atomic force microscopy and field emission gun-secondary electron microscopy, respectively. Also, the nanodomes were observed by high resolution transmission electron microscopy. The oxygen atoms preferentially bond to carbon atoms by forming terminal carbonyl groups in the most reactive parts of the nanostructures. After the irradiation, the remaining nanostructures are grouped around two well-defined size distributions. Subsequent annealing eliminates volatile oxygen compounds retained at the surface. The oxygen ions mainly react with nitrogen atoms located in pyridinelike structures. (C) 2008 American Institute of Physics.1031

Psychometric properties of 4-item questionnaire for sleep habits and time in a South American paediatric population

Objectives: To assess the psychometric properties of 4-item questionnaire about sleep habits and time in South American children (3-10 years) and adolescents (11-18 years). Material and Methods: We evaluated 459 participants from seven South American cities. Two items from week and weekend days wake up time and bedtime were asked twice, with a 2-week interval. We calculated time spent in bed (subtracting wake up time from bedtime). Participants also answered the Healthy Lifestyle in Europe by Nutrition in Adolescence (HELENA) sleep time questionnaire. Results: The questionnaire showed acceptable temporal stability in children and adolescents on total days (rho >= 0.30; p<0.05). For total days, the questionnaire presented acceptable convergent validity only in children (rho from 0.48 to 0.62; p <= 0.01) compared with the HELENA questionnaire. Conclusion: The 4-item questionnaire is a reliable and valid tool for children; however, its validity is not consistent in adolescents for sleep habits and time

Scoping review of measures of treatment burden in patients with multimorbidity: advancements and current gaps

Objectives: To identify, assess, and summarize the measures to assess burden of treatment in patients with multimorbidity (BoT-MMs) and their measurement properties. Study Design and Setting: MEDLINE via PubMed was searched from inception until May 2021. Independent reviewers extracted data from studies in which BoT-MMs were developed, validated, or reported as used, including an assessment of their measurement properties (e.g., validity and reliability) using the COnsensus-based Standards for the selection of health Measurement INstruments. Results: Eight BoT-MMs were identified across 72 studies. Most studies were performed in English (68%), in high-income countries (90%), without noting urban-rural settings (90%). No BoT-MMs had both sufficient content validity and internal consistency; some measurement properties were either insufficient or uncertain (e.g., responsiveness). Other frequent limitations of BoT-MMs included absent recall time, presence of floor effects, and unclear rationale for categorizing and interpreting raw scores. Conclusion: The evidence needed for use of extant BoT-MMs in patients with multimorbidity remains insufficiently developed, including that of suitability for their development, measurement properties, interpretability of scores, and use in low-resource settings. This review summarizes this evidence and identifies issues needing attention for using BoT-MMs in research and clinical practice

Topological Quantum Glassiness

Quantum tunneling often allows pathways to relaxation past energy barriers which are otherwise hard to overcome classically at low temperatures. However, this is not always the case. In this paper we provide simple exactly solvable examples where the barriers each system encounters on its approach to lower and lower energy states become increasingly large and eventually scale with the system size. If the environment couples locally to the physical degrees of freedom in the system, tunnelling under large barriers requires processes whose order in perturbation theory is proportional to the width of the barrier. This results in quantum relaxation rates that are exponentially suppressed in system size: For these quantum systems, no physical bath can provide a mechanism for relaxation that is not dynamically arrested at low temperatures. The examples discussed here are drawn from three dimensional generalizations of Kitaev's toric code, originally devised in the context of topological quantum computing. They are devoid of any local order parameters or symmetry breaking and are thus examples of topological quantum glasses. We construct systems that have slow dynamics similar to either strong or fragile glasses. The example with fragile-like relaxation is interesting in that the topological defects are neither open strings or regular open membranes, but fractal objects with dimension $d^* = ln 3/ ln 2$.Comment: (18 pages, 4 figures, v2: typos and updated figure); Philosophical Magazine (2011