153 research outputs found
LOGISTICAL STRATEGIES AND RISKS IN CANADIAN GRAIN MARKETING
Supply chain management in grain marketing has become very important with the maturity of the industry. This is particularly important in the Canadian grain marketing system which has experienced disruptions for various reasons over many years. These problems have been the topic of numerous industry evaluations, have resulted in a complaint about service obligations and recently have been addressed by the Estey Commission. A detailed model of the supply chain in the Canadian grain logistics system was developed in this paper to evaluate factors that cause disruptions, as well as the effect of several important logistics and marketing strategies on system performance. The results indicated that in a normal year there is sufficient randomness throughout the various elements of the system that it is expected that demurrage at the West Coast would be a major cost. However, the amount of service disruptions and demurrage are affected by several important factors including the distribution of tough and damp grains, mis-graded grain, and the level of exportable supplies. There are several important strategic variables that have important effects on system performance. These include the aggressiveness in selling relative to capacity, and the level of beginning port stocks.Grain Marketing, Transportation, Supply Chain Management, Logistics, Marketing,
LOGISTICS AND SUPPLY CHAIN STRATEGIES IN GRAIN EXPORTING
During the past decade, the grain shipping industry has become highly competitive and technologically advanced. These changes, along with the introduction of innovative shipping mechanisms, have made logistics management an important source of opportunity and risk for grain shippers. In this study, a stochastic simulation model was developed to evaluate the tradeoffs and effects of key variables on logistical performance in managing the grain supply chain. Average demurrage cost for the supply chain was $2.03 million with the greatest cost being for railcars and the least cost being for barges. Of the stochastic variables modeled, changes in export demand had the greatest impact on demurrage costs.Supply Chain, Grain Shipping, Logistics, Demurrage, Guaranteed Freight, Industrial Organization,
Performance and Fundamental Processes at Low Energy in a Two-Phase Liquid Xenon Dark Matter Detector
We extend the study of the performance of a prototype two-phase liquid xenon
WIMP dark matter detector to recoil energies below 20 keV. We demonstrate a new
method for obtaining the best estimate of the energies of events using a
calibrated sum of charge and light signals and introduce the corresponding
discrimination parameter, giving its mean value at 4 kV/cm for electron and
nuclear recoils up to 300 and 100 keV, respectively. We show that fluctuations
in recombination limit discrimination for most energies, and reveal an
improvement in discrimination below 20 keV due to a surprising increase in
ionization yield for low energy electron recoils. This improvement is crucial
for a high-sensitivity dark matter search.Comment: 4 pages, 6 figures, submitted to DM06 conference proceedings in Nucl
Phys
Scintillation Pulse Shape Discrimination in a Two-Phase Xenon Time Projection Chamber
The energy and electric field dependence of pulse shape discrimination in
liquid xenon have been measured in a 10 gm two-phase xenon time projection
chamber. We have demonstrated the use of the pulse shape and charge-to-light
ratio simultaneously to obtain a leakage below that achievable by either
discriminant alone. A Monte Carlo is used to show that the dominant fluctuation
in the pulse shape quantity is statistical in nature, and project the
performance of these techniques in larger detectors. Although the performance
is generally weak at low energies relevant to elastic WIMP recoil searches, the
pulse shape can be used in probing for higher energy inelastic WIMP recoils.Comment: 7 pages, 11 figure
Improved Limits on Spin-Dependent WIMP-Proton Interactions from a Two Liter CFI Bubble Chamber
Data from the operation of a bubble chamber filled with 3.5 kg of CFI
in a shallow underground site are reported. An analysis of ultrasound signals
accompanying bubble nucleations confirms that alpha decays generate a
significantly louder acoustic emission than single nuclear recoils, leading to
an efficient background discrimination. Three dark matter candidate events were
observed during an effective exposure of 28.1 kg-day, consistent with a neutron
background. This observation provides the strongest direct detection constraint
to date on WIMP-proton spin-dependent scattering for WIMP masses
GeV/c.Comment: 4 pages, 4 figures V2 submitted to match journal versio
The scintillation and ionization yield of liquid xenon for nuclear recoils
XENON10 is an experiment designed to directly detect particle dark matter. It
is a dual phase (liquid/gas) xenon time-projection chamber with 3D position
imaging. Particle interactions generate a primary scintillation signal (S1) and
ionization signal (S2), which are both functions of the deposited recoil energy
and the incident particle type. We present a new precision measurement of the
relative scintillation yield \leff and the absolute ionization yield Q_y, for
nuclear recoils in xenon. A dark matter particle is expected to deposit energy
by scattering from a xenon nucleus. Knowledge of \leff is therefore crucial for
establishing the energy threshold of the experiment; this in turn determines
the sensitivity to particle dark matter. Our \leff measurement is in agreement
with recent theoretical predictions above 15 keV nuclear recoil energy, and the
energy threshold of the measurement is 4 keV. A knowledge of the ionization
yield \Qy is necessary to establish the trigger threshold of the experiment.
The ionization yield \Qy is measured in two ways, both in agreement with
previous measurements and with a factor of 10 lower energy threshold.Comment: 8 pages, 9 figures. To be published in Nucl. Instrum. Methods
Pulse-shape discrimination and energy resolution of a liquid-argon scintillator with xenon doping
Liquid-argon scintillation detectors are used in fundamental physics
experiments and are being considered for security applications. Previous
studies have suggested that the addition of small amounts of xenon dopant
improves performance in light or signal yield, energy resolution, and particle
discrimination. In this study, we investigate the detector response for xenon
dopant concentrations from 9 +/- 5 ppm to 1100 +/- 500 ppm xenon (by weight) in
6 steps. The 3.14-liter detector uses tetraphenyl butadiene (TPB) wavelength
shifter with dual photomultiplier tubes and is operated in single-phase mode.
Gamma-ray-interaction signal yield of 4.0 +/- 0.1 photoelectrons/keV improved
to 5.0 +/- 0.1 photoelectrons/keV with dopant. Energy resolution at 662 keV
improved from (4.4 +/- 0.2)% ({\sigma}) to (3.5 +/- 0.2)% ({\sigma}) with
dopant. Pulse-shape discrimination performance degraded greatly at the first
addition of dopant, slightly improved with additional additions, then rapidly
improved near the end of our dopant range, with performance becoming slightly
better than pure argon at the highest tested dopant concentration. Some
evidence of reduced neutron scintillation efficiency with increasing dopant
concentration was observed. Finally, the waveform shape outside the TPB region
is discussed, suggesting that the contribution to the waveform from
xenon-produced light is primarily in the last portion of the slow component
Design and Performance of the XENON10 Dark Matter Experiment
XENON10 is the first two-phase xenon time projection chamber (TPC) developed
within the XENON dark matter search program. The TPC, with an active liquid
xenon (LXe) mass of about 14 kg, was installed at the Gran Sasso underground
laboratory (LNGS) in Italy, and operated for more than one year, with excellent
stability and performance. Results from a dark matter search with XENON10 have
been published elsewhere. In this paper, we summarize the design and
performance of the detector and its subsystems, based on calibration data using
sources of gamma-rays and neutrons as well as background and Monte Carlo
simulations data. The results on the detector's energy threshold, energy and
position resolution, and overall efficiency show a performance that exceeds
design specifications, in view of the very low energy threshold achieved (<10
keVr) and the excellent energy resolution achieved by combining the ionization
and scintillation signals, detected simultaneously
NEST: A Comprehensive Model for Scintillation Yield in Liquid Xenon
A comprehensive model for explaining scintillation yield in liquid xenon is
introduced. We unify various definitions of work function which abound in the
literature and incorporate all available data on electron recoil scintillation
yield. This results in a better understanding of electron recoil, and
facilitates an improved description of nuclear recoil. An incident gamma energy
range of O(1 keV) to O(1 MeV) and electric fields between 0 and O(10 kV/cm) are
incorporated into this heuristic model. We show results from a Geant4
implementation, but because the model has a few free parameters, implementation
in any simulation package should be simple. We use a quasi-empirical approach,
with an objective of improving detector calibrations and performance
verification. The model will aid in the design and optimization of future
detectors. This model is also easy to extend to other noble elements. In this
paper we lay the foundation for an exhaustive simulation code which we call
NEST (Noble Element Simulation Technique).Comment: 24 pages, 9 figures, 3 table
- …