High Input Impedance Voltage-Mode Universal Biquadratic Filters With Three Inputs Using Three CCs and Grounding Capacitors

Two current conveyors (CCs) based high input impedance voltage-mode universal biquadratic filters each with three input terminals and one output terminal are presented. The first circuit is composed of three differential voltage current conveyors (DVCCs), two grounded capacitors and four resistors. The second circuit is composed of two DVCCs, one differential difference current conveyor (DDCC), two grounded capacitors and four grounded resistors. The proposed circuits can realize all the standard filter functions, namely, lowpass, bandpass, highpass, notch and allpass filters by the selections of different input voltage terminals. The proposed circuits offer the features of high input impedance, using only grounded capacitors and low active and passive sensitivities. Moreover, the x ports of the DVCCs (or DDCC) in the proposed circuits are connected directly to resistors. This design offers the feature of a direct incorporation of the parasitic resistance at the x terminal of the DVCC (DDCC), Rx, as a part of the main resistance

Jet array impingement flow distributions and heat transfer characteristics. Effects of initial crossflow and nonuniform array geometry

Two-dimensional arrays of circular air jets impinging on a heat transfer surface parallel to the jet orifice plate are considered. The jet flow, after impingement, is constrained to exit in a single direction along the channel formed by the jet orifice plate and the heat transfer surface. The configurations considered are intended to model those of interest in current and contemplated gas turbine airfoil midchord cooling applications. The effects of an initial crossflow which approaches the array through an upstream extension of the channel are considered. Flow distributions as well as heat transfer coefficients and adiabatic wall temperatures resolved to one streamwise hole spacing were measured as a function of the initial crossflow rate and temperature relative to the jet flow rate and temperature. Both Nusselt number profiles and dimensionless adiabatic wall temperature (effectiveness) profiles are presented and discussed. Special test results which show a significant reduction of jet orifice discharge coefficients owing to the effect of a confined crossflow are also presented, along with a flow distribution model which incorporates those effects. A nonuniform array flow distribution model is developed and validated

Study of the Brazil and Falkland currents using their images of Nimbus 5 and oceanographic data in 1972 - 1973

The Western Edge of the Sub-tropical Convergence of the South-western Atlantic Ocean, called the Front, which is a thermal discontinuity between the Brazil and Falkland Currents, was studied utilizing the Temperature Humidity Infrared Radiometer (THIR) of Nimbus V in the 10.5 to 12.5 micrometers channel and historical oceanographic data. Some important results obtained are: the oceanographic Front could be detected from Nimbus THIR data; oceanographic charts showed that the transition zone where the Brazil and the Falkland Currents meet was the Front detected from satellite data; ocean current speeds calculated with THIR data were of the same order of magnitude as those calculated oceanographically; fisheries statistics for Pargo Roseo showed that the maximum catches were in September of 1973, in the period when the Front was observed most distinctly and clearly. The results showed the great potentiality of satellite data to study surface thermal structures, surface currents and oceanic fisheries

THE 3-D KINEMATIC ANALYSIS OF DIFFERENT TENNIS SERVE

The key to success for a good tennis player is to be able to take the advantages of serving and keep the serve. The world's professional tennis players in front of the world rankings, most have very excellent serve skills. Two different footwork techniques in tennis serve used by most professional tennis players are the foot-up and foot-back serve technique. Most researchers investigated the differences between these footwork techniques using 2-D kinematics data (Elliott et al, 1983). However, little evidence has demonstrated that which serve technique is better (Bylak et al, 1998) or if a difference exists between foot-up and foot-back technique using 3-D analysis (Elliott et al, 1996). The purposes of this study were to investgate the differences in 3-D kinematics between the foot-up and foot-back tennis serve techniques