The effect of sample preparation on uranium hydriding

AbstractThe influence of sample cleaning preparation on the early stages of uranium hydriding has been examined, by using four identical samples but concurrently prepared using four different methods. The samples were reacted together in the same corrosion cell to ensure identical exposure conditions. From the analysis, it was found that the hydride nucleation rate was proportional to the level of strain exhibiting higher number density for the more strained surfaces. Additionally, microstructure of the metal plays a secondary role regarding initial hydrogen attack on the highly strained surfaces yet starts to dominate the system while moving to more pristine samples

A physics-based maintenance cost methodology for commercial aircraft engines.

A need has been established in industry and academic publications to link an engine’s maintenance costs throughout its operational life to its design as well as its operations and operating conditions. The established correlations between engine operation, design and maintenance costs highlight the value of establishing a satisfactory measure of the relative damage due to different operating conditions (operational severity). The methodology developed in this research enables the exploration of the causal, physics-based relationships underlying the statistical correlations in the public domain and identifies areas for further investigation. This thesis describes a physics-based approach to exploring the interactions, for commercial aircraft, of engine design, operation and through life maintenance costs. Applying the “virtual-workshop” workscoping concept to model engine maintenance throughout the operating life captures the maintenance requirements at each shop visit and the impact of a given shop visit on the timing and requirements for subsequent visits. Comparisons can thus be made between the cost implications of alternative operating regimes, flight profiles and maintenance strategies, taking into account engine design, age, operation and severity. The workscoping model developed operates within a physics-based methodology developed collaboratively within the research group which encompasses engine performance, lifing and operational severity modelling. The tool-set of coupled models used in this research additionally includes the workscoping maintenance cost model developed and implements a simplified 3D turbine blade geometry, new lifing models and an additional lifing mechanism (Thermo-mechanical fatigue (TMF)). Case studies presented model the effects of different outside air temperatures, reduced thrust operations (derate), flight durations and maintenance decisions. The use of operational severity and exhaust gas temperature margin deterioration as physics based cost drivers, while commonly accepted, limit the comparability of the results to other engine-aircraft pairs as the definition of operational severity, its derivation and application vary widely. The use of a single operation severity per mission based on high pressure turbine blade life does not permit the maintenance to vary with the prevalent lifing mechanism type (cyclic / steady state).Engineering and Physical Sciences (EPSRC)Eng

In-situ, time resolved monitoring of uranium in BFS:OPC grout. Part 1: Corrosion in water vapour

Uranium encapsulated in grout was exposed to water vapour for extended periods of time. Through synchrotron x-ray powder difraction and tomography measurements, uranium dioxide was determined the dominant corrosion product over a 50-week time period. The oxide growth rate initiated rapidly, with rates comparable to the U+H2O reaction. Over time, the reaction rate decreased and eventually plateaued to a rate similar to the U+H2O+O2 reaction. This behaviour was not attributed to oxygen ingress, but instead the decreasing permeability of the grout, limiting oxidising species access to the metal surface

Pseudohomozygous dysfibrinogenemia

Abstract Hypodysfibrinogenemia (HD) is a heterogeneous disorder in which plasma fibrinogen antigen and function are both reduced but discordant. This report addresses the key clinical question of whether genetic analysis enables clinically useful subclassification of patients with HD. We report a new case and identify a further eight previously documented cases that have the laboratory features of HD but biallelic inheritance of quantitative and qualitative fibrinogen gene variants. The cases displayed both bleeding and thrombosis and sometimes had undetectable fibrinogen activity. In all cases, the predicted effect of the coinherited variants is reduced levels of circulating fibrinogen that is all dysfunctional. We propose the term pseudohomozygous dysfibrinogenemia for this subtype of recessively inherited HD that is distinct from the more commonly recognized monoallelic HD caused by a single fibrinogen gene variant

A kinetic analysis methodology to elucidate the roles of metal, support and solvent for the hydrogenation of 4-phenyl-2-butanone over Pt/TiO<inf>2</inf>

The rate and, more importantly, selectivity (ketone vs aromatic ring) of the hydrogenation of 4-phenyl-2-butanone over a Pt/TiO₂ catalyst have been shown to vary with solvent. In this study, a fundamental kinetic model for this multi-phase reaction has been developed incorporating statistical analysis methods to strengthen the foundations of mechanistically sound kinetic models. A 2-site model was determined to be most appropriate, describing aromatic hydrogenation (postulated to be over a platinum site) and ketone hydrogenation (postulated to be at the platinum–titania interface). Solvent choice has little impact on the ketone hydrogenation rate constant but strongly impacts aromatic hydrogenation due to solvent-catalyst interaction. Reaction selectivity is also correlated to a fitted product adsorption constant parameter. The kinetic analysis method shown has demonstrated the role of solvents in influencing reactant adsorption and reaction selectivity.We acknowledge EPSRC for funding as part of the CASTech grant (EP/G011397/1) and the Department of Employment and Learning for a studentship (IM). NSB was funded by a PhD scholarship from the University of Birmingham. SKW was supported by an Engineering Doctorate Studentship in Formulation Engineering at the University of Birmingham sponsored by the EPSRC (EP/G036713/1) and Johnson Matthey.This is the final version of the article. It was first available from Elsevier via http://dx.doi.org/10.1016/j.jcat.2015.06.00

Realization of the farad from the dc quantum Hall effect with digitally-assisted impedance bridges

A new traceability chain for the derivation of the farad from dc quantum Hall effect has been implemented at INRIM. Main components of the chain are two new coaxial transformer bridges: a resistance ratio bridge, and a quadrature bridge, both operating at 1541 Hz. The bridges are energized and controlled with a polyphase direct-digital-synthesizer, which permits to achieve both main and auxiliary equilibria in an automated way; the bridges and do not include any variable inductive divider or variable impedance box. The relative uncertainty in the realization of the farad, at the level of 1000 pF, is estimated to be 64E-9. A first verification of the realization is given by a comparison with the maintained national capacitance standard, where an agreement between measurements within their relative combined uncertainty of 420E-9 is obtained.Comment: 15 pages, 11 figures, 3 table

A pivotal role for starch in the reconfiguration of 14C-partitioning and allocation in Arabidopsis thaliana under short-term abiotic stress.

Plant carbon status is optimized for normal growth but is affected by abiotic stress. Here, we used 14C-labeling to provide the first holistic picture of carbon use changes during short-term osmotic, salinity, and cold stress in Arabidopsis thaliana. This could inform on the early mechanisms plants use to survive adverse environment, which is important for efficient agricultural production. We found that carbon allocation from source to sinks, and partitioning into major metabolite pools in the source leaf, sink leaves and roots showed both conserved and divergent responses to the stresses examined. Carbohydrates changed under all abiotic stresses applied; plants re-partitioned 14C to maintain sugar levels under stress, primarily by reducing 14C into the storage compounds in the source leaf, and decreasing 14C into the pools used for growth processes in the roots. Salinity and cold increased 14C-flux into protein, but as the stress progressed, protein degradation increased to produce amino acids, presumably for osmoprotection. Our work also emphasized that stress regulated the carbon channeled into starch, and its metabolic turnover. These stress-induced changes in starch metabolism and sugar export in the source were partly accompanied by transcriptional alteration in the T6P/SnRK1 regulatory pathway that are normally activated by carbon starvation