2,218 research outputs found
Effects of Heat as a Taphonomic Agent on Kerf Dimensions
The information that can be derived from the rate of preservation of cremated human remains is highly valuable for forensic anthropologists and bioarchaeologists. Especially when taphonomic agents, such as fire, are intentionally introduced to obscure lesions on the skeleton. When sharp force trauma is present on bones, one of the main questions that arise is whether it is possible to tell what instrument was used for trauma infliction. This study used quantitative methods to examine kerfs on bones treated with heat as a taphonomic agent. The experiment used three sharp-bladed weapons to inflict trauma on porcine long bones: a single bladed non-serrated kitchen knife, a hacksaw, and a wood saw. The traumatised bones along with control bones were burnt in controlled laboratory conditions at temperatures ranging from 300°C to 1000°C. Quantitative analysis was undertaken on scanning electron microscopy images. Shrinkage of the kerf dimensions were recorded only at 1000°C; excepting marks from the wood saw, which instead showed an increase in maximum width. Individualisation of the saws was not possible using only the metric traits. However, the class of the weapons (knife versus saw) could always be identified. It has been concluded that burning may cause fluctuation in kerf width
Extensive periosteal new bone formation in a skeleton from post-Medieval Chichester, England: A probable case of metastatic prostatic carcinoma
An elderly male skeleton from a site in Chichester, UK, was found with a widespread periosteal reaction, principally affecting the axial skeleton and the pelvis. Radiography showed the presence of sclerosing infiltrates, mainly involving the lumbar vertebrae and pelvis. The differential diagnosis is discussed, reaching the conclusion that hypertrophic osteo-arthopathy (HOA) is the only reasonable alternative condition likely to produce such a widespread periosteal reaction as found here. HOA does not produce secondary deposits in the skeleton, however, and we conclude that his is most likely a case of prostatic carcinoma
Teleworking in Portuguese public administration during the COVID-19 pandemic: Advantages, disadvantages, work-life balance and motivation
This article seeks to characterise teleworking in public administration during the COVID-19 pandemic. It draws on a study that aimed to collect the perceptions of Portuguese public servants about this phenomenon. Findings show that, in general, perceptions of workers and managers about teleworking are more positive than negative. It seems that teleworking in public administration has succeeded despite perceptions of insufficient equipment supply and some stigmatisation of teleworkers. The article also sought to investigate whether the perception of the potential advantages and disadvantages of teleworking, with special emphasis on work-life balance, varies according to the workers' gender and number of dependents. The study found that this was indeed the case. However, there were also differences relating to workers' motivation. The study found that a significant proportion of Portuguese public servants felt more motivated when performing their activities as teleworkers.info:eu-repo/semantics/publishedVersio
First results of the two square meters multilayer glass composite mirror design proposed for the Cherenkov Telescope Array developed at INFN
The Cherenkov Telescope Array (CTA) is a future ground-based gamma-ray
astronomy detector that will consist of more than 100 Imaging Atmospheric
Cherenkov Telescopes of different sizes. The total reflective surface of
roughly 10 000 m requires unprecedented technological efforts towards a
cost-efficient production of light-weight and reliable mirror substrates at
high production rate. We report on a new mirror concept proposed for CTA
developed by INFN, which is based on the replication from a spherical convex
mold under low pressure. The mirror substrate is an open structure design made
by thin glass layers at the mirror's front and rear interspaced by steel
cylinders. A first series of nominal size mirrors has been produced, for which
we discuss the optical properties in terms of radius of curvature and focusing
power
An examination of the spatial distribution of the tissue fragments created during a single explosive attack
Throughout the course of a forensic investigation following an explosive attack, the identification and recovery of tissue fragments is of extreme importance. There are few universally accepted methods to achieve this end. This project aims to explore this issue through the examination of the spatial distribution of the tissue fragments resulting from an explosive event. To address this, a two stage pilot study was conducted: first, a series of controlled explosions on porcine carcases was undertaken. Second, the data produced from these explosions were used to chart the spatial distribution of the tissue debris. In the controlled explosions, 3kg military grade explosive was chosen to create the maximum amount of fragmentation; this level of explosive also prevented the complete disappearance of forensic evidence through evaporation. Additionally, the blast created by military grade explosive is highly powerful and would mean that the maximum possible distance was achieved and would therefore allow the recorded distances and pattern spread to be a guideline for forensic recovery of associated with an explosive amount of an unknown size and quality. A total station was employed to record the location of the resulting forensic evidence, with the collected data analysed using R Studio. The observed patterns suggested that the distribution of remains is fairly consistent in trials under similar environmental conditions. This indicates potential for some general guidelines for forensic evidence collection (for example, the distance from the explosion that a search should cover)
The Public Administration Performance Appraisal Integrated System (SIADAP) and the Portuguese civil servants perceptions
As part of managerial reform process, in 2004 the Public Administration Performance Appraisal Integrated System (SIADAP) was set up in Portugal. This study aimed to analyze the perceptions of Portuguese civil servants on this appraisal system. A second drive was to understand how those perceptions change depending on what extent the model is perceived as fair or not. A survey was carried out and data were collected from 2066 civil servants, including managers. The results show very negative perceptions, in particular regarding SIADAP’s objectivity, transparency and fairness. Also, Kruskal-Wallis tests and post-hoc paired comparisons reveal that civil servants who see the system as “unfair” tend to have more negative perceptions on it than those who see it as “fair” or those who are not sure about the fairness of the system.info:eu-repo/semantics/acceptedVersio
Cognitive bias and the order of examination in forensic anthropological non-metric methods: a pilot study
Research has established that contextual information has the potential to influence the decisions of examiners in various forensic domains, including forensic anthropology. Studies have demonstrated that the non-metric sex estimation methods are susceptible to issues of cognitive bias, however the different types of stimuli that can influence the decision-making process remain understudied. As forensic anthropologists will examine multiple skeletal elements to estimate the sex of skeletal remains, a pilot study was designed to assess the potential of cognitive bias resulting from the order of examination. Two groups performed a non-metric sex estimation of the innominates and the skull with methods from Standards on one individual complete skeleton. Group A examined the skull first followed by the innominates, while Group B examined the innominates first followed by the skull. Results reveal a significant difference between the two groups in the sex estimation of the innominates and the complete skeleton (p = 0.020 and p = 0.022, respectively). This research demonstrates that order of examination for sex estimation may act as context and potentially influence the subsequent analyses. Additional research is necessary to broaden the understanding of decision-making and aid in the establishment of standard operating procedures designed to mitigate the potential effects of cognitive bias
Main Fuel Cells mathematical models: Comparison and analysis in terms of free parameters
This paper resumes the main mathematical models of Fuel Cells (PEM models). In particular, a comparison study of the various models introduced in the technical literature is presented and the dependency of the various model parameters is analyzed in different operating conditions. As the manifold of the model parameter is very wide and their determination is difficult, it is mandatory to introduce approximations and simplifications on which each model is based. The novelty of this work is the organization of the existing models in three categories with regard to the number of free parameters and to the dependency of such parameters on the different running conditions and the usage of a reference model in order to compare the difference between the latter once both in terms of fast execution of the simulation and care of the simulation results
Exploring public perceptions of creating and using 3D printed human remains
3D printed human remains offer an alternative presentation format to traditional photographs, that could be more effective and less emotive. However, the perception of the public regarding key questions, such as the use, ownership, and disposal of 3D printed remains in courts of law has not yet been established. This study explored whether the creation of 3D printed human remains could be considered as an ethical practice by members of the public. A survey comprised of 36 questions was designed to gather responses from members of the public (n = 400) about their attitudes to the creation and use of 3D printed human remains. A majority of respondents believed it was ethical to use 3D prints in courtroom demonstrations (more than 90%) and that this may help jurors to better understand expert testimony over photographs. Respondents also indicated that the context of the case and whether consent had been received from next of kin were important considerations. The results of this study indicate that there is a recognition that there is a direct connection between 3D printed remains and the individual from whom a print derives, and that there is a clear public interest in ensuring that prints are used ethically and responsibly. Yet there are currently no guidelines for what constitutes best ethical practice for the creation and utilisation of 3D prints. As we look forward, there is a need to identify how best to treat 3D printed remains with dignity and respect in casework in a manner that is also contextually appropriate
- …