1,116 research outputs found
Gate control of superconductivity in mesoscopic all-metallic devices
The possibility to tune, through the application of a control gate voltage, the supercon-ducting properties of mesoscopic devices based on Bardeen–Cooper–Schrieffer metals was recently demonstrated. Despite the extensive experimental evidence obtained on different materials and geometries, a description of the microscopic mechanism at the basis of such an unconventional effect has not been provided yet. This work discusses the technological potential of gate control of superconductivity in metallic superconductors and revises the experimental results, which provide information regarding a possible thermal origin of the effect: first, we review experiments performed on high-critical-temperature elemental superconductors (niobium and vanadium) and show how devices based on these materials can be exploited to realize basic electronic tools, such as a half-wave rectifier. Second, we discuss the origin of the gating effect by showing gate-driven suppression of the supercurrent in a suspended titanium wire and by providing a comparison between thermal and electric switching current probability distributions. Furthermore, we discuss the cold field-emission of electrons from the gate employing finite element simulations and compare the results with experimental data. In our view, the presented data provide a strong indication regarding the unlikelihood of the thermal origin of the gating effect
Suppressing quasiparticle poisoning with a voltage-controlled filter
We study single-electron charging events in an Al/InAs nanowire hybrid system
with deliberately introduced gapless regions. The occupancy of a Coulomb island
is detected using a nearby radio-frequency quantum dot as a charge sensor. We
demonstrate that a 1 micron gapped segment of the wire can be used to
efficiently suppress single electron poisoning of the gapless region and
therefore protect the parity of the island while maintaining good electrical
contact with a normal lead. In the absence of protection by charging energy,
the 1e switching rate can be reduced below 200 per second. In the same
configuration, we observe strong quantum charge fluctuations due to exchange of
electron pairs between the island and the lead. The magnetic field dependence
of the poisoning rate yields a zero-field superconducting coherence length of ~
90 nm
Record Processing in ITACA, the New Italian Strong-Motion Database
The development of the new Italian strong-motion database ITACA
(ITalian AC-celerometric Archive, http://itaca.mi.ingv.it) is in progress under the
sponsorship of the National Department of Civil Protection (DPC) within Project
S4, in the framework of DPC-INGV 2007–2009 research agreement. This work
started from the alpha version of ITACA [8], where 2,182 3-component records
from 1,004 earthquakes, mainly recorded by the National Accelerometric Network,
RAN, operated by DPC, were processed and included in the database. Earthquake
metadata, recording station information and reports on the available geologicalgeophysical
information of 452 recording sites, corresponding to about 70% of the
total, were also included. Subsequently, ITACA has been updated and will reach
its final stage by the end of Project S4, around mid-2010, with additional features,
improved information about recording stations, and updated records, including the
Mw6.3 L’Aquila earthquake. All records were re-processed with respect to the alpha
version [9], with a special care to preserve information about late-triggered events
and to ensure compatibility of corrected records, i.e., velocity and displacement
traces obtained by the first and second integral of the corrected acceleration should
not be affected by unrealistic trends. After a short introduction of ITACA and its
most relevant features and statistics, this paper mainly deals with the newly adopted
processing scheme, with reference to the problems encountered and the solutions
that have been devised
Curcumin loaded polymeric vs. Lipid nanoparticles: Antioxidant effect on normal and hypoxic olfactory ensheathing cells
Background: Curcumin (Cur) shows anti-inflammatory and antioxidant effects on central nervous system diseases. The aim of this study was to develop Cur-loaded polymeric and lipid nanoparticles for intranasal delivery to enhance its stability and increase antioxidant effect on olfactory ensheathing cells (OECs). Methods: The nanosuspensions were subjected to physico-chemical and technological evaluation through photon correlation spectroscopy (PCS), differential scanning calorimetry (DSC) and UV-spectrophotometry. The cytotoxicity studies of nanosuspensions were carried out on OECs. A viability test was performed after 24 h of exposure of OECs to unloaded and curcumin-loaded nanosuspensions. The potential protective effect of Cur was assessed on hypoxic OECs cells. Uptake studies were performed on the same cell cultures. Thermal analysis was performed to evaluate potential interaction of Cur with a 1,2-Dimyristoyl-sn-glycero-3-phosphocholine (DMPC) biomembrane model. Results: PCS analysis indicated that lipid and polymeric nanosuspensions showed a mean size of 127.10 and 338.20 nm, respectively, high homogeneity and negative zeta potential. Incorporation of Cur into both nanocarriers increased drug stability up to 135 days in cryoprotected freeze-dried nanosuspensions. Cell viability was improved when hypoxic OECs were treated with Cur-loaded polymeric and lipid nanosuspensions compared with the control. Conclusions: Both nanocarriers could improve the stability of Cur as demonstrated by technological studies. Biological studies revealed that both nanocarriers could be used to deliver Cur by intranasal administration for brain targeting
Comparison of different primer sets for use in automated ribosomal intergenic spacer analysis of complex bacterial communities
ITSF and ITSReub, constituting a new primer set designed for the amplification of the 16S-23S rRNA intergenic transcribed spacers, have been compared with primer sets consisting of 1406F and 23Sr (M. M. Fisher and E. W. Triplett, Appl. Environ. Microbiol. 65:4630-4636, 1999) and S-D-Bact-1522-b-S-20 and L-D-Bact-132-a-A-18 (L. Ranjard et al., Appl. Environ. Microbiol. 67:4479-4487, 2001), previously proposed for automated ribosomal intergenic spacer analysis (ARISA) of complex bacterial communities. An agricultural soil and a polluted soil, maize silage, goat milk, a small marble sample from the fac\ub8ade of the Certosa of Pavia (Pavia, Italy), and brine from a deep hypersaline anoxic basin in the Mediterranean Sea were analyzed with the three primer sets. The number of peaks in the ARISA profiles, the range of peak size (width of the profile), and the reproducibility of results were used as indices to evaluate the efficiency of the three primer sets. The overall data showed that ITSF and ITSReub generated the most informative (in term of peak number) and reproducible profiles and yielded a wider range of spacer sizes (134 to 1,387) than the other primer sets, which were limited in detecting long fragments. The minimum amount of DNA template and sensitivity in detection of minor DNA populations were evaluated with artificial mixtures of defined bacterial species. ITSF and ITSReub amplified all the bacteria at DNA template concentrations from 280 to 0.14 ng l 1, while the other primer sets failed to detect the spacers of one or more bacterial strains. Although the primer set consisting of ITSF and ITSReub and that of S-D-Bact-1522-b-S-20 and L-D-Bact-132-a-A-18 showed similar sensitivities for the DNA of Allorhizobium undicula mixed with the DNA of other species, the S-D-Bact-1522-b-S-20 and
L-D-Bact-132-a-A-18 primer set failed to detect the DNA of Pseudomonas stutzeri
Mechanical and thermal properties of crab chitin reinforced carboxylated SBR composites
The addition of small amounts (up to 9 wt%) of chitin microsized particles, originating from shellfish waste, to carboxylated styrene-butadiene rubber (XSBR) matrix (as received and annealed to 100°C) has been studied. In particular, this study concentrated on their mechanical (creep investigation by nanoindentation and dynamical-mechanical analysis), thermal (differential scanning calorimetry and thermogravimetry) and swelling behaviour (toluene absorption) and was completed by morphological characterisation by scanning electron microscopy and atomic force microscopy. The results show that annealing has a limited effect on materials properties, effects which are further reduced by the addition of growing amounts of crab chitin. It should be noted that the limited filler content used in the study does not substantially modify the linear creep behaviour of XSBR for sufficiently long loading times. The thermal stability of the system does also appear to be preserved even with the maximum chitin content added, while it serves sufficiently as an effective barrier against aromatic solvent absorption
- …