IMECE2002-33859 MANUFACTURING OF ELECTRICALLY CONDUCTIVE MICROSTRUCTURES BY DROPWISE PRINTING AND LASER CURING OF NANOPARTICLE-SUSPENSIONS

ABSTRACT A novel method for the manufacturing of electric microconductors for semiconductor and other devices is presented. The method brings together three technologies: controlled (on demand) printing, laser curing, and the employment of nanoparticles of matter, possessing markedly different properties (here, melting point) than their bulk counterparts. A suspension of gold particles in toluene solvent is employed to print electrically conducting line patterns utilizing a modified on demand ink jet printing process. To this end, microdroplets of 80-100 µm diameters are deposited on a moving substrate such that the droplets form continuous lines. Focused laser irradiation is utilized in order to evaporate the solvent, melt the metal nanoparticles in the suspension, and sinter the suspended particles to form continuous, electrically conducting gold microlines on a substrate. The ultra fine particles in the suspension have a diameter size range of 2 -5 nm. Due to curvature effects of such small particles, the melting point is markedly lower (400°C) than that of bulk gold (1063°C). Thermodynamic aspects of the effect of particle size on the melting and evaporation temperatures of gold and toluene, respectively, are discussed in the paper. The structure and line width of the cured line as a function of the laser irradiation power and stage velocity are reported in detail. Preliminary measurements of the electrical conductivity are represented

On the fabrication and mechanical modelling microscale bistable tensegrity systems

Abstract We report about the analysis, design, and experimental testing of modular structures composed of bistable units derived from the classic triangular tensegrity prism. Tensegrity structures are pin-connected frameworks, composed by bars and cables, possessing internal mechanisms and self-stress states, and featuring a variety of structural responses depending on their prestress, edge connectivity, and geometry. When a tensegrity system has only one internal mechanism and one self-stress state, as in the triangular prism case, it is possible to associate to it a corresponding bistable unit, by replacing all cables with bars and changing their edge-lengths slightly. After presenting experimental results of compression tests carried out on microscale specimens fabricated through multiphoton lithography, we compare them with the numerical predictions obtained by our computational model

A High-Flux, Flexible Membrane with Parylene-encapsulated Carbon Nanotubes

We present fabrication and characterization of a membrane based on carbon nanotubes (CNTs) and parylene. Carbon nanotubes have shown orders of magnitude enhancement in gas and water permeability compared to estimates generated by conventional theories [1, 2]. Large area membranes that exhibit flux enhancement characteristics of carbon nanotubes may provide an economical solution to a variety of technologies including water desalination [3] and gas sequestration [4]. We report a novel method of making carbon nanotube-based, robust membranes with large areas. A vertically aligned dense carbon nanotube array is infiltrated with parylene. Parylene polymer creates a pinhole free transparent film by exhibiting high surface conformity and excellent crevice penetration. Using this moisture-, chemical- and solvent-resistant polymer creates carbon nanotube membranes that promise to exhibit high stability and biocompatibility. CNT membranes are formed by releasing a free-standing film that consists of parylene-infiltrated CNTs, followed by CNT uncapping on both sides of the composite material. Thus fabricated membranes show flexibility and ductility due to the parylene matrix material, as well as high permeability attributed to embedded carbon nanotubes. These membranes have a potential for applications that may require high flux, flexibility and durability

Laser-induced phase separation of silicon carbide

Understanding the phase separation mechanism of solid-state binary compounds induced by laser-material interaction is a challenge because of the complexity of the compound materials and short processing times. Here we present xenon chloride excimer laser-induced melt-mediated phase separation and surface reconstruction of single-crystal silicon carbide and study this process by high-resolution transmission electron microscopy and a time-resolved reflectance method. A single-pulse laser irradiation triggers melting of the silicon carbide surface, resulting in a phase separation into a disordered carbon layer with partially graphitic domains (???2.5 nm) and polycrystalline silicon (???5 nm). Additional pulse irradiations cause sublimation of only the separated silicon element and subsequent transformation of the disordered carbon layer into multilayer graphene. The results demonstrate viability of synthesizing ultra-thin nanomaterials by the decomposition of a binary system.open

Advanced Hodgkin lymphoma in the East of England: a 10-year comparative analysis of outcomes for real-world patients treated with ABVD or escalated-BEACOPP, aged less than 60 years, compared with 5-year extended follow-up from the RATHL trial

Treatment with ABVD (doxorubicin, bleomycin, vinblastine, and dacarbazine) or escalated(e)-BEACOPP (bleomycin, etoposide, doxorubicin, cyclophosphamide, vincristine, procarbazine, and prednisolone) remains the international standard of care for advanced-stage classical Hodgkin lymphoma (HL). We performed a retrospective, multicentre analysis of 221 non-trial (“real-world”) patients, aged 16–59 years, diagnosed with advanced-stage HL in the Anglia Cancer Network between 2004 and 2014, treated with ABVD or eBEACOPP, and compared outcomes with 1088 patients in the Response-Adjusted Therapy for Advanced Hodgkin Lymphoma (RATHL) trial, aged 18–59 years, with median follow-up of 87.0 and 69.5 months, respectively. Real-world ABVD patients (n=177) had highly similar 5-year progression-free survival (PFS) and overall survival (OS) compared with RATHL (PFS 79.2% vs 81.4%; OS 92.9% vs 95.2%), despite interim positron-emission tomography-computed tomography (PET/CT)-guided dose-escalation being predominantly restricted to trial patients. Real-world eBEACOPP patients (n=44) had superior PFS (95.5%) compared with real-world ABVD (HR 0.20, p=0.027) and RATHL (HR 0.21, p=0.015), and superior OS for higher-risk (international prognostic score ≥3 [IPS 3+]) patients compared with real-world IPS 3+ ABVD (100% vs 84.5%, p=0.045), but not IPS 3+ RATHL patients. Our data support a PFS, but not OS, advantage for patients with advanced-stage HL treated with eBEACOPP compared with ABVD and suggest higher-risk patients may benefit disproportionately from more intensive therapy. However, increased access to effective salvage therapies might minimise any OS benefit from reduced relapse rates after frontline therapy

Nanofiltration of Electrolyte Solutions by Sub-2nm Carbon Nanotube Membranes

Both MD simulations and experimental studies have shown that liquid and gas flow through carbon nanotubes with nanometer size diameter is exceptionally fast. For applications in separation technology, selectivity is required together with fast flow. In this work, we use pressure-driven filtration experiments to study ion exclusion in silicon nitride/sub-2-nm CNT composite membranes as a function of solution ionic strength, pH, and ion valence. We show that carbon nanotube membranes exhibit significant ion exclusion at low salt concentration. Our results support a rejection mechanism dominated by electrostatic interactions between fixed membrane charges and mobile ions, while steric and hydrodynamic effects appear to be less important. Comparison with commercial nanofiltration membranes for water softening reveals that our carbon nanotube membranes provides far superior water fluxes for similar ion rejection capabilities

Sequential inverse dysregulation of the RNA helicases DDX3X and DDX3Y facilitates MYC-driven lymphomagenesis

Summary DDX3X is a ubiquitously expressed RNA helicase involved in multiple stages of RNA biogenesis. DDX3X is frequently mutated in Burkitt lymphoma, but the functional basis for this is unknown. Here, we show that loss-of-function DDX3X mutations are also enriched in MYC-translocated diffuse large B cell lymphoma and reveal functional cooperation between mutant DDX3X and MYC. DDX3X promotes the translation of mRNA encoding components of the core translational machinery, thereby driving global protein synthesis. Loss-of-function DDX3X mutations moderate MYC-driven global protein synthesis, thereby buffering MYC-induced proteotoxic stress during early lymphomagenesis. Established lymphoma cells restore full protein synthetic capacity by aberrant expression of DDX3Y, a Y chromosome homolog, the expression of which is normally restricted to the testis. These findings show that DDX3X loss of function can buffer MYC-driven proteotoxic stress and highlight the capacity of male B cell lymphomas to then compensate for this loss by ectopic DDX3Y expression

Outdoor particulate matter and childhood asthma admissions in Athens, Greece: a time-series study

<p>Abstract</p> <p>Background</p> <p>Particulate matter with diameter less than 10 micrometers (PM₁₀) that originates from anthropogenic activities and natural sources may settle in the bronchi and cause adverse effects possibly via oxidative stress in susceptible individuals, such as asthmatic children. This study aimed to investigate the effect of outdoor PM₁₀concentrations on childhood asthma admissions (CAA) in Athens, Greece.</p> <p>Methods</p> <p>Daily counts of CAA from the three Children's Hospitals within the greater Athens' area were obtained from the hospital records during a four-year period (2001-2004, n = 3602 children). Mean daily PM₁₀concentrations recorded by the air pollution-monitoring network of the greater Athens area were also collected. The relationship between CAA and PM₁₀concentrations was investigated using the Generalized Linear Models with Poisson distribution and logistic analysis.</p> <p>Results</p> <p>There was a statistically significant (95% CL) relationship between CAA and mean daily PM₁₀concentrations on the day of exposure (+3.8% for 10 μg/m³increase in PM₁₀concentrations), while a 1-day lag (+3.4% for 10 μg/m³increase in PM₁₀concentrations) and a 4-day lag (+4.3% for 10 μg/m³increase in PM₁₀concentrations) were observed for older asthmatic children (5-14 year-old). High mean daily PM₁₀concentration (the highest 10%; >65.69 μg/m³) doubled the risk of asthma exacerbations even in younger asthmatic children (0-4 year-old).</p> <p>Conclusions</p> <p>Our results provide evidence of the adverse effect of PM₁₀on the rates of paediatric asthma exacerbations and hospital admissions. A four-day lag effect between PM₁₀peak exposure and asthma admissions was also observed in the older age group.</p

Nanoscale Science, Engineering and Technology Research Directions

This report describes important future research directions in nanoscale science, engineering and technology. It was prepared in connection with an anticipated national research initiative on nanotechnology for the twenty-first century. The research directions described are not expected to be inclusive but illustrate the wide range of research opportunities and challenges that could be undertaken through the national laboratories and their major national scientific user facilities with the support of universities and industry