316 research outputs found
Software breadboard study
The overall goal of this study was to develop new concepts and technology for the Comet Rendezvous Asteroid Flyby (CRAF), Cassini, and other future deep space missions which maximally conform to the Functional Specification for the NASA X-Band Transponder (NXT), FM513778 (preliminary, revised July 26, 1988). The study is composed of two tasks. The first task was to investigate a new digital signal processing technique which involves the processing of 1-bit samples and has the potential for significant size, mass, power, and electrical performance improvements over conventional analog approaches. The entire X-band receiver tracking loop was simulated on a digital computer using a high-level programming language. Simulations on this 'software breadboard' showed the technique to be well-behaved and a good approximation to its analog predecessor from threshold to strong signal levels in terms of tracking-loop performance, command signal-to-noise ratio and ranging signal-to-noise ratio. The successful completion of this task paves the way for building a hardware breadboard, the recommended next step in confirming this approach is ready for incorporation into flight hardware. The second task in this study was to investigate another technique which provides considerable simplification in the synthesis of the receiver first LO over conventional phase-locked multiplier schemes and in this approach, provides down-conversion for an S-band emergency receive mode without the need of an additional LO. The objective of this study was to develop methodology and models to predict the conversion loss, input RF bandwidth, and output RF bandwidth of a series GaAs FET sampling mixer and to breadboard and test a circuit design suitable for the X and S-band down-conversion applications
Electronics and Chemistry: Varying Single Molecule Junction Conductance Using Chemical Substituents
We measure the low bias conductance of a series of substituted benzene
diamine molecules while breaking a gold point contact in a solution of the
molecules. Transport through these substituted benzenes is by means of
nonresonant tunneling or superexchange, with the molecular junction conductance
depending on the alignment of the metal Fermi level to the closest molecular
level. Electron-donating substituents, which drive the occupied molecular
orbitals up, increase the junction conductance, while electron-withdrawing
substituents have the opposite effect. Thus for the measured series,
conductance varies inversely with the calculated ionization potential of the
molecules. These results reveal that the occupied states are closest to the
gold Fermi energy, indicating that the tunneling transport through these
molecules is analogous to hole tunneling through an insulating film.Comment: 14 pages, 4 figure
Formation and Evolution of Single Molecule Junctions
We analyze the formation and evolution statistics of single molecule
junctions bonded to gold electrodes using amine, methyl sulfide and dimethyl
phosphine link groups by measuring conductance as a function of junction
elongation. For each link, maximum elongation and formation probability
increase with molecular length, strongly suggesting that processes other than
just metal-molecule bond breakage play a key role in junction evolution under
stress. Density functional theory calculations of adiabatic trajectories show
sequences of atomic-scale changes in junction structure, including shifts in
attachment point, that account for the long conductance plateau lengths
observed.Comment: 10 pages, 4 figures, submitte
Weaving Nanoscale Cloth through Electrostatic Templating
Here we disclose a simple route to nanoscopic 2D woven structures reminiscent of the methods used to produce macroscopic textiles. We find that the same principles used in macroscopic weaving can be applied on the nanoscale to create two-dimensional molecular cloth from polymeric strands, a molecular thread. The molecular thread is composed of Co6Se8(PEt3)4L2 superatoms that are bridged with L = benzene bis-1,4-isonitrile to form polymer strands. As the superatoms that make up the polymer chain are electrochemically oxidized, they are electrostatically templated by a nanoscale anion, the tetragonal Lindqvist polyoxometalate Mo6O192–. The tetragonal symmetry of the dianionic template creates a nanoscale version of the box weave. The crossing points in the weave feature π-stacking of the bridging linker. By examining the steps in the weaving process with single crystal X-ray diffraction, we find that the degree of polymerization at the crossing points is crucial in the cloth formation. 2D nanoscale cloth will provide access to a new generation of smart, multifunctional materials, coatings, and surfaces
Amine-Linked Single Molecule Circuits: Systematic Trends Across Molecular Families
A comprehensive review is presented of single molecule junction conductance
measurements across families of molecules measured while breaking a gold point
contact in a solution of molecules with amine end groups. A theoretical
framework unifies the picture for the amine-gold link bonding and the tunnel
coupling through the junction using Density Functional Theory based
calculations. The reproducible electrical characteristics and utility for many
molecules is shown to result from the selective binding between the gold
electrodes and amine link groups through a donor-acceptor bond to
undercoordinated gold atoms. While the bond energy is modest, the maximum force
sustained by the junction is comparable to, but less than, that required to
break gold point contacts. The calculated tunnel coupling provides conductance
trends for all 41 molecule measurements presented here, as well as insight into
the variability of conductance due to the conformational changes within
molecules with torsional degrees of freedom. The calculated trends agree to
within a factor of two of the measured values for conductance ranging from 10-7
G0 to 10-2 G0, where G0 is the quantum of conductance (2e2/h).Comment: Invited paper for forthcoming special issue of Journal of Physics:
Condensed Matte
Translocation of single-stranded DNA through single-walled carbon nanotubes
We report the fabrication of devices in which one single-walled carbon nanotube spans a barrier between two fluid reservoirs, enabling direct electrical measurement of ion transport through the tube. A fraction of the tubes pass anomalously high ionic currents. Electrophoretic transport of small single-stranded DNA oligomers through these tubes is marked by large transient increases in ion current and was confirmed by polymerase chain reaction analysis. Each current pulse contains about 10 7 charges, an enormous amplification of the translocated charge. Carbon nanotubes simplify the construction of nanopores, permit new types of electrical measurements, and may open avenues for control of DNA translocation.published_or_final_versio
Quantifying through-space charge transfer dynamics in \u3c0-coupled molecular systems
understanding the role of intermolecular interaction on through-space charge transfer characteristics in \u3c0-stacked molecular systems is central to the rational design of electronic materials. However, a quantitative study of charge transfer in such systems is often difficult because of poor control over molecular morphology. Here we use the core-hole clock implementation of resonant photoemission spectroscopy to study the femtosecond chargetransfer dynamics in cyclophanes, which consist of two precisely stacked \u3c0-systems held together by aliphatic chains. We study two systems, [2,2]paracyclophane (22PCP) and [4,4]paracyclophane (44PCP), with inter-ring separations of 3.0 and 4.0 \uc5, respectively. We find that charge transfer across the \u3c0-coupled system of 44PCP is 20 times slower than in 22PCP. We attribute this difference to the decreased inter-ring electronic coupling in 44PCP.
These measurements illustrate the use of core-hole clock spectroscopy as a general tool for quantifying through-space coupling in \u3c0-stacked systems
Single-molecule transistor fabrication by self-aligned lithography and in situ molecular assembly
Abstract We describe the fabrication of single-molecule transistors by self-aligned lithography and in situ molecular assembly. Ultrathin metallic electrodes are patterned with a nanoscale interelectrode separation defined by the lateral oxidation of a thin layer of Al. Highly conjugated molecular units are sequentially assembled within the electrode gap by selective design of the molecular end group chemistry. The assembled devices display evidence of molecular conduction
Carbon nanotubes-semiconductor networks for organic electronics: The pickup stick transistor
We demonstrate an alternative path for achieving high transconductance organic transistors in spite of relatively large source to drain distances. The improvement of the electronic characteristic of such a scheme is equivalent to a 60-fold increase in mobility of the underlying organic semiconductor. The method is based on percolating networks, which we create from a dispersion of individual single-wall carbon nanotubes and narrow ropes within an organic semiconducting host. The majority of current paths between source and drain follow the metallic nanotubes but require a short, switchable semiconducting link to complete the circuit. With these nanotube-semiconducting composites we achieve effectively a 60X reduction in source to drain distance, which is equivalent to a 60-fold increase of the '' effective '' mobility of the starting semiconducting material with a minor decrease of the on/off current ratio. These field-induced percolating networks allow for the fabrication of high-transconductance transistors having relatively large source to drain distances that can be manufactured inexpensively by commercially available printing techniques. (c) 2005 American Institute of Physicsclose516
- …