Two-phase, passive separator-and-filter assembly

Assembly separates liquid from gas by passive hydrophilic/hydrophobic material approach. Apparatus is comprised of porous glass hydrophilic tubes. Quantity, lateral size, and pore size of glass tubes are determined by particular design requirements with regard to water rate, water quality contamination level, application endurance life, and operating differential pressure level

A New Wideband, Fully Steerable, Decametric Array at Clark Lake

A fully steerable, decametric array for radio astronomy is under construction at the Clark Lake Radio Observatory near Borrego Springs, California. This array will be a T of 720 conical spiral antennas (teepee-shaped antennas, hence the array is called the TPT), 3.0 km by 1.8 km capable of operating between 15 and 125 MHz. Both its operating frequency and beam position will be adjustable in less than one millisecond, and the TPT will provide a 49-element picture around the central beam position for extended source observations. Considerable experience was gained in the operation of completed portions of the array, and successful operation of the final array is assured. The results are described of the tests which were conducted with the conical spirals, and the planned electronics and data processing systems are described

A wall interference assessment/correction system

The Hackett method (a Wall Pressure Signature Method) was selected to be adapted for the 12 ft Wind Tunnel WIAC system. This method uses limited measurements of the static pressure at the wall, in conjunction with the solid wall boundary condition, to determine the strength and distribution of singularities representing the test article. The singularities are used in term for estimating wall interference at the model location. Hackett's method will have to be formulated for application to the unique geometry of the 12 ft tunnel. The WIAC code will be validated by conducting numerically simulated experiments rather than actual wind tunnel experiments. The simulations will be used to generate both free air and confined wind tunnel flow fields for each of the test articles over a range of test configurations. Specifically the pressure signature at the test section wall will be computed for the confined case to provide the simulated 'measured' data. These data will serve as the input for the WIAC method. The performance of the WIAC method then may be evaluated by comparing the corrected parameters with those for the free air simulation

Electron Self Energy for Higher Excited S Levels

A nonperturbative numerical evaluation of the one-photon electron self energy for the 3S and 4S states with charge numbers Z=1 to 5 is described. The numerical results are in agreement with known terms in the expansion of the self energy in powers of Zalpha.Comment: 3 pages, RevTeX, to appear in Phys. Rev.

On the transonic aerodynamics of a compressor blade row

Linearized analyses have been carried out for the induced velocity and pressure fields within a compressor blade row operating in an infinite annulus at transonic Mach numbers of the flow relative to the blades. In addition, the relationship between the induced velocity and the shape of the mean blade surface has been determined. A computational scheme has been developed for evaluating the blade mean surface ordinates and surface pressure distributions. The separation of the effects of a specified blade thickness distribution from the effects of a specified distribution of the blade lift has been established. In this way, blade mean surface shapes that are necessary for the blades to be locally nonlifting have been computed and are presented for two examples of blades with biconvex parabolic arc sections of radially tapering thickness. Blade shapes that are required to achieve a zero thickness, uniform chordwise loading, constant work spanwise loading are also presented for two examples. In addition, corresponding surface pressure distributions are given. The flow relative to the blade tips has a high subsonic Mach number in the examples that have been computed. The results suggest that at near-sonic relative tip speeds the effective blade shape is dominated by the thickness distribution, with the lift distribution playing only a minor role

Statistical framework for estimating GNSS bias

We present a statistical framework for estimating global navigation satellite system (GNSS) non-ionospheric differential time delay bias. The biases are estimated by examining differences of measured line integrated electron densities (TEC) that are scaled to equivalent vertical integrated densities. The spatio-temporal variability, instrumentation dependent errors, and errors due to inaccurate ionospheric altitude profile assumptions are modeled as structure functions. These structure functions determine how the TEC differences are weighted in the linear least-squares minimization procedure, which is used to produce the bias estimates. A method for automatic detection and removal of outlier measurements that do not fit into a model of receiver bias is also described. The same statistical framework can be used for a single receiver station, but it also scales to a large global network of receivers. In addition to the Global Positioning System (GPS), the method is also applicable to other dual frequency GNSS systems, such as GLONASS (Globalnaya Navigazionnaya Sputnikovaya Sistema). The use of the framework is demonstrated in practice through several examples. A specific implementation of the methods presented here are used to compute GPS receiver biases for measurements in the MIT Haystack Madrigal distributed database system. Results of the new algorithm are compared with the current MIT Haystack Observatory MAPGPS bias determination algorithm. The new method is found to produce estimates of receiver bias that have reduced day-to-day variability and more consistent coincident vertical TEC values.Comment: 18 pages, 5 figures, submitted to AM

PROFIT PATTERNS IN THE U.S. AND THE WEST, 1992 AND 1997: WHAT COUNTY-LEVEL DATA REVEAL

We examine whether there are spatial relationships in U.S. production agriculture's profitability across regions and over time. We test the traditional view that factor markets (approximately) adjust to equalize agriculture's net returns over space and time using county-level data from the UDSA's Census of Agriculture, 1992 and 1997. We estimate Gini coefficients and calculate the Theil Entropy Measure (TMI) to examine changes in the concentration of returns over space and time, and to decompose the variation in inequality in returns due to between-region variation in returns. Although factor markets (approximately) adjust to equalize net returns over space and time, there is still considerable variability in returns within regions and within states. Use of county-level (Census of Agriculture) and farm-level data (ARMS Survey) to help highlight these differences. In general, farm-level Gini coefficients have remained fairly constant but show a mild increase in concentration since the 1996 FAIR Act. The TMI analysis reveals that in 1997 about 54 percent of the variation in total returns (net cash returns) was due to within-region variation, and about 46 percent was due to (average) between-region variation (compared to 53 and 47 percent in 1992). Total U.S. inequity of net cash returns increased from 0.14 in 1992 to 0.21 in 1997.Gini coefficient, Theil Entropy Measure, net cash returns, net cash and net farm income, farm structure, Agricultural Finance, Community/Rural/Urban Development, Q, Q140,

Investigation of relationships between linears, total and hazy areas, and petroleum production in the Williston Basin: An ERTS approach

The author has identified the following significant results. ERTS-1 imagery in a variety of formats was used to locate linear, tonal, and hazy features and to relate them to areas of hydrocarbon production in the Williston Basin of North Dakota, eastern Montana, and northern South Dakota. Derivative maps of rectilinear, curvilinear, tonal, and hazy features were made using standard laboratory techniques. Mapping of rectilinears on both bands 5 and 7 over the entire region indicated the presence of a northeast-southwest and a northwest-southeast regional trend which is indicative of the bedrock fracture pattern in the basin. Curved lines generally bound areas of unique tone, maps of tonal patterns repeat many of the boundaries seen on curvilinear maps. Tones were best analyzed on spring and fall imagery in the Williston Basin. It is postulated that hazy areas are caused by atmospheric phenomena. The ability to use ERTS imagery as an exploration tool was examined where petroleum and gas are presently produced (Bottineau Field, Nesson and Antelope anticlines, Redwing Creek, and Cedar Creek anticline). It is determined that some tonal and linear features coincide with location of present production in Redwing and Cedar Creeks. In the remaining cases, targets could not be sufficiently well defined to justify this method

Feasibility study of silicon nitride protection of plastic encapsulated semiconductors

The application of low temperature silicon nitride protective layers on wire bonded integrated circuits mounted on lead frame assemblies is reported. An evaluation of the mechanical and electrical compatibility of both plasma nitride and photochemical silicon nitride (photonitride) passivations (parallel evaluations) of integrated circuits which were then encapsulated in plastic is described. Photonitride passivation is compatible with all wire bonded lead frame assemblies, with or without initial chip passivation. Plasma nitride passivation of lead frame assemblies is possible only if the chip is passivated before lead frame assembly. The survival rate after the environmental test sequence of devices with a coating of plasma nitride on the chip and a coating of either plasma nitride or photonitride over the assembled device is significantly greater than that of devices assembled with no nitride protective coating over either chip or lead frame

Investigation of relationships between linears, tonal and hazy anomalies, and petroleum production in the Williston Basin: An ERTS approach

There are no author-identified significant results in this report