Measurement of the electric fluctuation spectrum of magnetohydrodynamic turbulence

Magnetohydrodynamic (MHD) turbulence in the solar wind is observed to show the spectral behavior of classical Kolmogorov fluid turbulence over an inertial subrange and departures from this at short wavelengths, where energy should be dissipated. Here we present the first measurements of the electric field fluctuation spectrum over the inertial and dissipative wavenumber ranges in a $\beta \gtrsim 1$ plasma. The $k^{-5/3}$ inertial subrange is observed and agrees strikingly with the magnetic fluctuation spectrum; the wave phase speed in this regime is shown to be consistent with the Alfv\'en speed. At smaller wavelengths $k \rho_i \geq 1$ the electric spectrum is softer and is consistent with the expected dispersion relation of short-wavelength kinetic Alfv\'en waves. Kinetic Alfv\'en waves damp on the solar wind ions and electrons and may act to isotropize them. This effect may explain the fluid-like nature of the solar wind.Comment: submitted; 4 pages + 3 figure

Development of Replacement Heifers using Combinations of Three Forage Types and Feed Supplements (with or without Broiler Litter)

The proper management of replacement heifers is an essential component of successful cow/calf operations. The level of management and nutrition applied to replacement heifers as calves and yearlings can impact their subsequent reproductive performance and productivity

Stainless super p-branes

The elementary and solitonic supersymmetric p-brane solutions to supergravity theories form families related by dimensional reduction, each headed by a maximal (`stainless') member that cannot be isotropically dimensionally oxidized into higher dimensions. We find several new families, headed by stainless solutions in various dimensions D\le 9. In some cases, these occur with dimensions (D,p) that coincide with those of descendants of known families, but since the new solutions are stainless, they are necessarily distinct. The new stainless supersymmetric solutions include a 6-brane and a 5-brane in D=9, a string in D=5, and particles in all dimensions 5\le D\le 9

Analytic regularity for a singularly perturbed system of reaction-diffusion equations with multiple scales: proofs

We consider a coupled system of two singularly perturbed reaction-diffusion equations, with two small parameters $0< \epsilon \le \mu \le 1$, each multiplying the highest derivative in the equations. The presence of these parameters causes the solution(s) to have \emph{boundary layers} which overlap and interact, based on the relative size of $\epsilon$ and $$. We construct full asymptotic expansions together with error bounds that cover the complete range $0 < \epsilon \leq \mu \leq 1$. For the present case of analytic input data, we derive derivative growth estimates for the terms of the asymptotic expansion that are explicit in the perturbation parameters and the expansion order

Mesoscopic Phase Coherence in a Quantum Spin Fluid

Mesoscopic quantum phase coherence is important because it improves the prospects for handling quantum degrees of freedom in technology. Here we show that the development of such coherence can be monitored using magnetic neutron scattering from a one-dimensional spin chain Y2BaNiO5, a quantum spin fluid where no classical, static magnetic order is present. In the cleanest samples, the quantum coherence length is 20 nm, almost an order of magnitude larger than the classical antiferromagnetic correlation length of 3 nm. We also demonstrate that the coherence length can be modified by static and thermally activated defects in a quantitatively predictable manner

Stability of sub-surface oxygen at Rh(111)

Using density-functional theory (DFT) we investigate the incorporation of oxygen directly below the Rh(111) surface. We show that oxygen incorporation will only commence after nearly completion of a dense O adlayer (\theta_tot = 1.0 monolayer) with O in the fcc on-surface sites. The experimentally suggested octahedral sub-surface site occupancy, inducing a site-switch of the on-surface species from fcc to hcp sites, is indeed found to be a rather low energy structure. Our results indicate that at even higher coverages oxygen incorporation is followed by oxygen agglomeration in two-dimensional sub-surface islands directly below the first metal layer. Inside these islands, the metastable hcp/octahedral (on-surface/sub-surface) site combination will undergo a barrierless displacement, introducing a stacking fault of the first metal layer with respect to the underlying substrate and leading to a stable fcc/tetrahedral site occupation. We suggest that these elementary steps, namely, oxygen incorporation, aggregation into sub-surface islands and destabilization of the metal surface may be more general and precede the formation of a surface oxide at close-packed late transition metal surfaces.Comment: 9 pages including 9 figure files. Submitted to Phys. Rev. B. Related publications can be found at http://www.fhi-berlin.mpg.de/th/paper.htm

Ab initio study of step formation and self-diffusion on Ag(100)

Using the plane wave pseudopotential method we performed density functional theory calculations on the stability of steps and self-diffusion processes on Ag(100). Our calculated step formation energies show that the {111}-faceted step is more stable than the {110}-faceted step. In accordance with experimental observations we find that the equilibrium island shape should be octagonal very close to a square with predominately {111}-faceted steps. For the (100) surface of fcc metals atomic migration proceeds by a hopping or an exchange process. For Ag(100) we find that adatoms diffuse across flat surfaces preferentially by hopping. Adatoms approaching the close-packed {111}-faceted step edges descend from the upper terrace to the lower level by an atomic exchange with an energy barrier almost identical to the diffusion barrier on flat surface regions. Thus, within our numerical accuracy (approx +- 0.05 eV) there is no additional step-edge barrier to descent. This provides a natural explanation for the experimental observations of the smooth two-dimensional growth in homoepitaxy of Ag(100). Inspection of experimental results of other fcc crystal surfaces indicates that our result holds quite generally.Comment: 10 pages, 9 figures. Submitted to Phys. Rev B (October 31, 1996

Anisotropy of Growth of the Close-Packed Surfaces of Silver

The growth morphology of clean silver exhibits a profound anisotropy: The growing surface of Ag(111) is typically very rough while that of Ag(100) is smooth and flat. This serious and important difference is unexpected, not understood, and hitherto not observed for any other metal. Using density functional theory calculations of self-diffusion on flat and stepped Ag(100) we find, for example, that at flat regions a hopping mechanism is favored, while across step edges diffusion proceeds by an exchange process. The calculated microscopic parameters explain the experimentally reported growth properties.Comment: RevTeX, 4 pages, 3 figures in uufiles form, to appear in Phys. Rev. Let

The focused ion beam as an integrated circuit restructuring tool

One of the capabilities of focused ion beam systems is ion milling. The purpose of this work is to explore this capability as a tool for integrated circuit restructuring. Methods for cutting and joining conductors are needed. Two methods for joining conductors are demonstrated. The first consists of spinning nitrocellulose (a self‐developing resist) on the circuit, ion exposing an area, say, 7×7 μm, then milling a smaller via with sloping sidewalls through the first metal layer down to the second, e‐beam evaporating metal, and then dissolving the nitrocellulose to achieve liftoff. The resistance of these links between two metal levels varied from 1 to 7 Ω. The second, simpler method consists of milling a via with vertical sidewalls down to the lower metal layer, then reducing the milling scan to a smaller area in the center of this via, thereby redepositing the metal from the lower layer on the vertical sidewall. The short circuit thus achieved varied from 0.4 to 1.5 Ω for vias of dimensions 3×3 μm to 1×1 μm, respectively. The time to mill a 1×1 μm via with a 68 keV Ga+ beam, of 220 Pa current is 60 s. In a system optimized for this application, this milling time is expected to be reduced by a factor of at least 100. In addition, cuts have been made in 1‐μm‐thick Al films covered by 0.65 μm of SiO2. These cuts have resistances in excess of 20 MΩ. This method of circuit restructuring can work at dimensions a factor of 10 smaller than laser zapping and requires no special sites to be fabricated

Data incongruence and the problem of avian louse phylogeny

Recent studies based on different types of data (i.e. morphological and molecular) have supported conflicting phylogenies for the genera of avian feather lice (Ischnocera: Phthiraptera). We analyse new and published data from morphology and from mitochondrial (12S rRNA and COI) and nuclear (EF1-) genes to explore the sources of this incongruence and explain these conflicts. Character convergence, multiple substitutions at high divergences, and ancient radiation over a short period of time have contributed to the problem of resolving louse phylogeny with the data currently available. We show that apparent incongruence between the molecular datasets is largely attributable to rate variation and nonstationarity of base composition. In contrast, highly significant character incongruence leads to topological incongruence between the molecular and morphological data. We consider ways in which biases in the sequence data could be misleading, using several maximum likelihood models and LogDet corrections. The hierarchical structure of the data is explored using likelihood mapping and SplitsTree methods. Ultimately, we concede there is strong discordance between the molecular and morphological data and apply the conditional combination approach in this case. We conclude that higher level phylogenetic relationships within avian Ischnocera remain extremely problematic. However, consensus between datasets is beginning to converge on a stable phylogeny for avian lice, at and below the familial rank