561 research outputs found

    Bonding-Compatible Corrosion Inhibitor for Rinsing Metals

    Get PDF
    A corrosion-inhibiting mixture of compounds has been developed for addition to the water used to rinse metal parts that have been cleaned with aqueous solutions in preparation for adhesive bonding of the metals to rubber and rubber-like materials. Prior to the development of this corrosion inhibitor, the parts (made, variously, of D6AC steel and 7075-T73 aluminum) were rinsed by deionized water, which caused corrosion in some places on the steel parts especially in such occluded places as sealing surfaces and threaded blind holes. An integral part of the particular cleaning process is the deposition of a thin layer of silicates and silane primers that increase the strength of the adhesive bond. The corrosion inhibitor is formulated, not only to inhibit corrosion of both D6AC steel and 7075- T73 aluminum, but also to either increase or at least not reduce the strength of the adhesive bond to be formed subsequently. The corrosion inhibitor is a mixture of sodium silicate and sodium tetraborate. The sodium silicate functions as both a corrosion inhibitor and a bond-strength promoter in association with the silane primers. The sodium tetraborate buffers the rinse solution at the optimum pH and functions as a secondary corrosion inhibitor for the steel. For a given application, the concentrations of sodium silicate and sodium tetraborate must be chosen in a compromise among the needs to inhibit corrosion of steel, inhibit corrosion of aluminum, and minimize cosmetic staining of both steel and aluminum. Concentrations of sodium silicate in excess of 150 parts of silicon per million parts of solution (ppm Si) have been determined to enhance inhibition of corrosion; unfortunately, because of the alkalinity of sodium silicate, even a small concentration can raise the pH of the rinse solution to such a level that aluminum becomes corroded despite the inhibiting effect. The pH of a solution that contains a high concentration of sodium silicate can be decreased by adding sodium tetraborate. On the other hand, the addition of sodium tetraborate increases the concentration of dissolved solids to such a high level that cosmetic staining becomes an issue

    MF2952

    Get PDF
    Caleb E. Wurth et al., Defining Sieving Methods Used to Determine and Express Fineness of Feed Materials, Kansas State University, October 2010

    Seeded x-ray free-electron laser generating radiation with laser statistical properties

    Full text link
    The invention of optical lasers led to a revolution in the field of optics and even to the creation of completely new fields of research such as quantum optics. The reason was their unique statistical and coherence properties. The newly emerging, short-wavelength free-electron lasers (FELs) are sources of very bright coherent extreme-ultraviolet (XUV) and x-ray radiation with pulse durations on the order of femtoseconds, and are presently considered to be laser sources at these energies. Most existing FELs are highly spatially coherent but in spite of their name, they behave statistically as chaotic sources. Here, we demonstrate experimentally, by combining Hanbury Brown and Twiss (HBT) interferometry with spectral measurements that the seeded XUV FERMI FEL-2 source does indeed behave statistically as a laser. The first steps have been taken towards exploiting the first-order coherence of FELs, and the present work opens the way to quantum optics experiments that strongly rely on high-order statistical properties of the radiation.Comment: 24 pages, 10 figures, 37 reference

    Interplay of Mott Transition and Ferromagnetism in the Orbitally Degenerate Hubbard Model

    Full text link
    A slave boson representation for the degenerate Hubbard model is introduced. The location of the metal to insulator transition that occurs at commensurate densities is shown to depend weakly on the band degeneracy M. The relative weights of the Hubbard sub-bands depend strongly on M, as well as the magnetic properties. It is also shown that a sizable Hund's rule coupling is required in order to have a ferromagnetic instability appearing. The metal to insulator transition driven by an increase in temperature is a strong function of it.Comment: 5 pages, revtex, 5 postscript figures, submitted to Phys. Rev.

    The most pathogenic transthyretin variant, L55P, forms amyloid fibrils under acidic conditions and protofilaments under physiological conditions

    Get PDF
    The L55P transthyretin (TTR) familial amyloid polyneuropathy-associated variant is distinct from the other TTR variants studied to date and the wild-type protein in that the L55P tetramer can dissociate to the monomeric amyloidogenic intermediate and form fibril precursors under physiological conditions (pH 7.0, 37 degrees C). The activation barrier associated with L55P-TTR tetramer dissociation is lower than the barrier for wild-type transthyretin dissociation, which does not form fibrils under physiological conditions. The L55P-TTR tetramer is also very sensitive to acidic conditions, readily dissociating to form the monomeric amyloidogenic intermediate between pH 5.5-5.0 where the wild-type TTR adopts a nonamyloidogenic tetrameric structure. The formation of the L55P monomeric amyloidogenic intermediate involves subtle tertiary structural changes within the beta-sheet rich subunit as discerned from Trp fluorescence, circular dichroism analysis, and ANS binding studies. The assembly of the L55P-TTR amyloidogenic intermediate at physiological pH (pH 7.5) affords protofilaments that elongate with time. TEM studies suggest that the entropic barrier associated with filament assembly (amyloid fibril formation) is high in vitro, amyloid being defined by the laterally assembled four filament structure observed by Blake upon isolation of "fibrils" from the eye of a FAP patient. The L55P-TTR protofilaments formed in vitro bind Congo red and thioflavin T (albeit more weakly than the fibrils produced at acidic pH), suggesting that the structure observed probably represents an amyloid precursor. The structural continuum from misfolded monomer through protofilaments, filaments, and ultimately fibrils must be considered as a possible source of pathology associated with these diseases

    Exact single spin flip for the Hubbard model in d=d=\infty

    Full text link
    It is shown that the dynamics of a single \downarrow-electron interacting with a band of \uparrow-electrons can be calculated exactly in the limit of infinite dimension. The corresponding Green function is determined as a continued fraction. It is used to investigate the stability of saturated ferromagnetism and the nature of the ground state for two generic non-bipartite infinite dimensional lattices. Non Fermi liquid behavior is found. For certain dopings the \downarrow-electron is bound to the \uparrow-holes.Comment: 4 pages, 3 figures included with psfig, Revtex; Phys. Rev. Lett. in press; some amendments made to clarify the calculation of the self-energy, the extrapolation of the continued fraction, and the statements on Fermi-liquid theor

    Lattice dependence of saturated ferromagnetism in the Hubbard model

    Full text link
    We investigate the instability of the saturated ferromagnetic ground state (Nagaoka state) in the Hubbard model on various lattices in dimensions d=2 and d=3. A variational resolvent approach is developed for the Nagaoka instability both for U = infinity and for U < infinity which can easily be evaluated in the thermodynamic limit on all common lattices. Our results significantly improve former variational bounds for a possible Nagaoka regime in the ground state phase diagram of the Hubbard model. We show that a pronounced particle-hole asymmetry in the density of states and a diverging density of states at the lower band edge are the most important features in order to stabilize Nagaoka ferromagnetism, particularly in the low density limit.Comment: Revtex, 18 pages with 18 figures, 7 pages appendices, section on bcc lattice adde

    Three-body correlations in the Nagaoka state on the square lattice

    Full text link
    A three-body scattering theory previously proposed by one of the present authors is developed to be applied to the saturated ferromagnetic state in the two-dimensional Hubbard model. The single-particle Green's function is calculated by taking account of the multiple scattering between two electrons and one hole. Several limiting cases are discussed and the relation to the variational principle is examined. The importance of the three-body correlation is demonstrated in comparison with the results of the ladder approximation. A possible phase boundary for the Nagaoka ground state is presented for the square lattice, which improves the previous variational results.Comment: 13 pages, 8 Postscript figures, submitted to Phys.Rev.

    Ferromagnetism in the large-U Hubbard model

    Full text link
    We study the Hubbard model on a hypercubic lattice with regard to the possibility of itinerant ferromagnetism. The Dynamical Mean Field theory is used to map the lattice model on an effective local problem, which is treated with help of the Non Crossing Approximation. By investigating spin dependent one-particle Green's functions and the magnetic susceptibility, a region with nonvanishing ferromagnetic polarization is found in the limit UU\to\infty. The δ\delta-T-phase diagram as well as thermodynamic quantities are discussed. The dependence of the Curie temperature on the Coulomb interaction and the competition between ferromagnetism and antiferromagnetism are studied in the large UU limit of the Hubbard model.Comment: 4 pages, 5 figures, accepted for publication in Physical Review B, Rapid Communication
    corecore