Muscle recruitment strategies can reduce joint loading during level walking

Joint inflammation, with consequent cartilage damage and pain, typically reduces functionality and affects activities of daily life in a variety of musculoskeletal diseases. Since mechanical loading is an important determinant of the disease process, a possible conservative treatment is the unloading of joints. In principle, a neuromuscular rehabilitation program aimed to promote alternative muscle recruitments could reduce the loads on the lower-limb joints during walking. The extent of joint load reduction one could expect from this approach remains unknown. Furthermore, assuming significant reductions of the load on the affected joint can be achieved, it is unclear whether, and to what extent, the other joints will be overloaded. Using subject-specific musculoskeletal models of four different participants, we computed the muscle recruitment strategies that minimised the hip, knee and ankle contact force, and predicted the contact forces such strategies induced at the other joints. Significant reductions of the peak force and impulse at the knee and hip were obtained, while only a minimal effect was found at the ankle joint. Adversely, the peak force and the impulse in non-targeted joints increased when aiming to minimize the load in an adjacent joint. These results confirm the potential of alternative muscle recruitment strategies to reduce the loading at the knee and the hip, but not at the ankle. Therefore, neuromuscular rehabilitation can be targeted to reduce the loading at affected joints but must be considered carefully in patients with multiple joints affected due to the potential adverse effects in non-targeted joints

Using musculoskeletal models to estimate in vivo total knee replacement kinematics and loads: effect of differences between models

Total knee replacement (TKR) is one of the most performed orthopedic surgeries to treat knee joint diseases in the elderly population. Although the survivorship of knee implants may extend beyond two decades, the poor outcome rate remains considerable. A recent computational approach used to better understand failure modes and improve TKR outcomes is based on the combination of musculoskeletal (MSK) and finite element models. This combined multiscale modeling approach is a promising strategy in the field of computational biomechanics; however, some critical aspects need to be investigated. In particular, the identification and quantification of the uncertainties related to the boundary conditions used as inputs to the finite element model due to a different definition of the MSK model are crucial. Therefore, the aim of this study is to investigate this problem, which is relevant for the model credibility assessment process. Three different generic MSK models available in the OpenSim platform were used to simulate gait, based on the experimental data from the fifth edition of the “Grand Challenge Competitions to Predict in vivo Knee Loads.” The outputs of the MSK analyses were compared in terms of relative kinematics of the knee implant components and joint reaction (JR) forces and moments acting on the tibial insert. Additionally, the estimated knee JRs were compared with those measured by the instrumented knee implant so that the “global goodness of fit” was quantified for each model. Our results indicated that the different kinematic definitions of the knee joint and the muscle model implemented in the different MSK models influenced both the motion and the load history of the artificial joint. This study demonstrates the importance of examining the influence of the model assumptions on the output results and represents the first step for future studies that will investigate how the uncertainties in the MSK models propagate on disease-specific finite element model results

Biofeedback for gait retraining based on real-time estimation of tibiofemoral joint contact forces

Biofeedback assisted rehabilitation and intervention technologies have the potential to modify clinically relevant biomechanics. Gait retraining has been used to reduce the knee adduction moment, a surrogate of medial tibiofemoral joint loading often used in knee osteoarthritis research. In this study we present an electromyogram-driven neuromusculoskeletal model of the lower-limb to estimate, in real-time, the tibiofemoral joint loads. The model included 34 musculotendon units spanning the hip, knee, and ankle joints. Full-body inverse kinematics, inverse dynamics, and musculotendon kinematics were solved in real-time from motion capture and force plate data to estimate the knee medial tibiofemoral contact force (MTFF). We analyzed 5 healthy subjects while they were walking on an instrumented treadmill with visual biofeedback of their MTFF. Each subject was asked to modify their gait in order to vary the magnitude of their MTFF. All subjects were able to increase their MTFF, whereas only 3 subjects could decrease it, and only after receiving verbal suggestions about possible gait modification strategies. Results indicate the important role of knee muscle activation patterns in modulating the MTFF. While this study focused on the knee, the technology can be extended to examine the musculoskeletal tissue loads at different sites of the human body

Biofeedback for gait retraining based on real-time estimation of tibiofemoral joint contact forces

Biofeedback assisted rehabilitation and intervention technologies have the potential to modify clinically relevant biomechanics. Gait retraining has been used to reduce the knee adduction moment, a surrogate of medial tibiofemoral joint loading often used in knee osteoarthritis research. In this study we present an electromyogram-driven neuromusculoskeletal model of the lower-limb to estimate, in real-time, the tibiofemoral joint loads. The model included 34 musculotendon units spanning the hip, knee, and ankle joints. Full-body inverse kinematics, inverse dynamics, and musculotendon kinematics were solved in real-time from motion capture and force plate data to estimate the knee medial tibiofemoral contact force (MTFF). We analyzed 5 healthy subjects while they were walking on an instrumented treadmill with visual biofeedback of their MTFF. Each subject was asked to modify their gait in order to vary the magnitude of their MTFF. All subjects were able to increase their MTFF, whereas only 3 subjects could decrease it, and only after receiving verbal suggestions about possible gait modification strategies. Results indicate the important role of knee muscle activation patterns in modulating the MTFF. While this study focused on the knee, the technology can be extended to examine the musculoskeletal tissue loads at different sites of the human body

Investigation of the dependence of joint contact forces on musculotendon parameters using a codified workflow for image-based modelling

The generation of subject-specific musculoskeletal models of the lower limb has become a feasible taskthanks to improvements in medical imaging technology and musculoskeletal modelling software.Nevertheless, clinical use of these models in paediatric applications is still limited for what concernsthe estimation of muscle and joint contact forces. Aiming to improve the current state of the art, amethodology to generate highly personalized subject-specific musculoskeletal models of the lower limbbased on magnetic resonance imaging (MRI) scans was codified as a step-by-step procedure and appliedto data from eight juvenile individuals. The generated musculoskeletal models were used to simulate 107gait trials using stereophotogrammetric and force platform data as input. To ensure completeness of themodelling procedure, muscles’ architecture needs to be estimated. Four methods to estimate muscles’maximum isometric force and two methods to estimate musculotendon parameters (optimal fiber lengthand tendon slack length) were assessed and compared, in order to quantify their influence on the models’output. Reported results represent the first comprehensive subject-specific model-based characterizationof juvenile gait biomechanics, including profiles of joint kinematics and kinetics, muscle forces and jointcontact forces. Our findings suggest that, when musculotendon parameters were linearly scaled from areference model and the muscle force-length-velocity relationship was accounted for in the simulations,realistic knee contact forces could be estimated and these forces were not sensitive the method used tocompute muscle maximum isometric force

Developing an algorithm to assess the UV erythemal dose for outdoor workers Validation through direct measures

An algorithm has been developed to determine the annual dose of UV solar radiation for outdoor workers. The dose is indirectly assessed basing on satellite data, mean global irradiance values, workers' data obtained by means of a questionnaire and corrective coefficients provided by a mathematical model. The values obtained by the use of the algorithm are compared with those obtained by measurement records in different environments. Results demonstrated that the algorithm estimates the mean daily erythemal dose with good approximation

Protocol for a Systematic Review on the Effectiveness of Interventions to Reduce Exposure to Occupational Solar UltraViolet Radiation (UVR) Among Outdoor Workers

Background: Solar UltraViolet Radiation (UVR) is considered the most relevant occupational carcinogenic exposure in terms of the number of workers exposed (i.e., outdoor workers) and UVR-induced skin cancers are among the most frequent types of occupational cancers worldwide. This review aims to collect and evaluate all the available preventive interventions conducted on outdoor workers to reduce their solar UVR related risk, with the final purpose of reducing the burden of occupational skin cancers for outdoor workers. Methods: We will search the following databases for peer-reviewed original research published: MEDLINE (through PubMed), Scopus, and EMBASE. We will include only interventional studies, both randomized and non-randomized, with an adequate comparison group, therefore excluding cross-sectional studies, as well as case-reports/series, reviews, and letters/comments. The systematic review will adhere to the “Preferred Reporting Items for Systematic reviews and Meta-Analyses” (PRISMA) guidelines for reporting systematic reviews. After the literature search, studies to be included will be independently reviewed by two Authors, first based on title and abstract, then based on the full text, according to the inclusion criteria. Conflicts will be solved by a third Author. Two authors will independently extract the required data from included studies and perform quality assessment according to the relevant domain for Risk of Bias assessment proposed by the Cochrane collaboration group. In case of sufficient homogeneity of interventions and outcomes evaluated, results from subgroups of studies will be pooled together in a meta-analysis. Discussion: Following the principles for the evaluation of interventions for cancer prevention established by the International Agency for Research on Cancer, this systematic review will investigate the effectiveness of the interventions, and consequently it will provide reliable indications for the actual reduction of skin cancer incidence in outdoor workers

Factors associated with SARS-CoV-2 infection risk among healthcare workers of an italian university hospital

We report the results of a study on the cumulative incidence of SARS-CoV-2 infections in about 6000 workers of the University Hospital of Modena, Northern Italy, in the period March 2020–January 2021, and the relations with some individual and occupational factors. Overall, in healthcare workers (HCW) the cumulative incidence of COVID-19 during the period was 13.8%. Results confirm the role of overweight and obesity as significant risk factors for SARS-CoV-2 infection. Chronic respiratory diseases, including asthma, also proved to be significantly associated with the infection rate. Considering occupational factors, the COVID-19 risk was about threefold (OR: 2.7; 95% CI 1.7–4.5) greater in nurses and nurse aides than in non-HCW, and about double (OR: 1.9; 95% CI 1.2–3.2) in physicians. Interestingly, an association was also observed between infection risk and nightshifts at work (OR: 1.8; 95% CI 1.4–2.3), significantly related to the total number of shifts in the whole eleven-month period. Even if the vaccination campaign has now greatly modified the scenario of SARS-CoV-2 infections among HCW, the results of this study can be useful for further development of health and policy strategies to mitigate the occupational risk related to the new variants of coronavirus, and therefore the evolution of the pandemic

Validation of a model-based inverse kinematics approach based on wearable inertial sensors

Wearable inertial measurement units (IMUs) are a promising solution to human motion estimation. Using IMUs 3D orientations, a model-driven inverse kinematics methodology to estimate joint angles is presented. Estimated joint angles were validated against encoder-measured kinematics (robot) and against marker-based kinematics (passive mechanism). Results are promising, with RMS angular errors respectively lower than 3 and 6 deg over a minimum range of motion of 50 deg (robot) and 160 deg (passive mechanism). Moreover, a noise robustness analysis revealed that the model-driven approach reduces the effects of experimental noises, making the proposed technique particularly suitable for application in human motion analysis

Occupational exposure to electromagnetic fields in magnetic resonance environment: an update on regulation, exposure assessment techniques, health risk evaluation, and surveillance

Magnetic resonance imaging (MRI) is one of the most-used diagnostic imaging methods worldwide. There are ∼50,000 MRI scanners worldwide each of which involves a minimum of five workers from different disciplines who spend their working days around MRI scanners. This review analyzes the state of the art of literature about the several aspects of the occupational exposure to electromagnetic fields (EMF) in MRI: regulations, literature studies on biological effects, and health surveillance are addressed here in detail, along with a summary of the main approaches for exposure assessment. The original research papers published from 2013 to 2021 in international peer-reviewed journals, in the English language, are analyzed, together with documents published by legislative bodies. The key points for each topic are identified and described together with useful tips for precise safeguarding of MRI operators, in terms of exposure assessment, studies on biological effects, and health surveillance. Graphical abstract: [Figure not available: see fulltext.