Longitudinal Stability Characteristics of the Consolidated Vultee XFY-1 Airplane with Windmilling Propellers as Obtained from Flight of 0.133-Scale Rocket-Propelled Model at Mach Numbers from 0.70 to 1.13

A flight test has been conducted to determine the longitudinal stability and control characteristics of a 0.133-scale model of the Consolidated Vultee XFY-1 airplane with windmilling propellers for the Mach number range between 0.70 and 1.13. The variation of lift-curve slope C(sub L(sub alpha) with Mach number was gradual with a maximum value of 0.074 occurring at a Mach number of 0.97. Propellers had little effect upon the values of lift-curve slope or the linearity of lift coefficient with angle of attack. At lift coefficients between approximately 0.25 and 0.45 with an elevon angle of approximately -l0 deg, there was a region of neutral longitudinal stability at Mach numbers below 0.93 introduced by the addition of windmilling propellers. Below a lift coefficient of 0.10 and above a lift coefficient of 0.45, the model was longitudinally stable throughout the Mach number range of the test. There was a forward shift in the aerodynamic center of about 3-percent mean aerodynamic chord introduced by the addition of propellers. The aerodynamic center as determined at low lift moved gradually from a value of 28.5-percent mean aerodynamic chord at a Mach number of 0.75 to a value of 47-percent mean aerodynamic chord at a Mach number of 1.10. There was an abrupt decrease in pitch damping between Mach numbers of 0.88 and 0.99 followed by a rapid increase in damping to a Mach number of 1.06. The propellers had little effect upon the pitch damping characteristics . The transonic trim change was a large pitching-down tendency with and without windmilling propellers. The elevons were effective pitch controls throughout the speed range; however, their effectiveness was reduced about 50 percent at supersonic speeds. The propellers had no appreciable effect upon the control effectiveness

Teacher Capacity and Attitude toward Data: An Examination of the Association between Teacher Beliefs and Student Performance on the Measures of Academic Progress Assessment

Since the onset of No Child Left Behind legislation and federal funding for schools tied to summative assessment performance, educational leaders have sought to identify factors that are most influential on student learning outcomes. Research continues to link the use of formative data practices and teacher efficacy to improved student performance. The intent of this study was to explore associations between teacher capacity and attitude and student performance. In this embedded mixed-methods study, qualitative data from focus groups comprised of survey participants were collected within a larger quantitative study that examined associations between teacher beliefs and student performance. The study focused on the impact of teacher beliefs on learning outcomes. Participants included elementary math and/or reading teachers at four elementary schools in a large, urban school district. Perceptual survey data were collected regarding teacher beliefs about their capacity to use MAP data and their attitudes towards MAP data. These data were compared to student proficiency and growth scores obtained on MAP in both math and reading using Pearson product-moment correlation. Focus group data were collected from each site in order to explain trends in survey responses. This study introduced teacher attitude as a new construct within teacher efficacy that was compared to both student proficiency and growth on the MAP assessment. Correlations for the relationships between teacher perceptions and student performance ranged from .24 to .46 (capacity) and .23 and .65 (attitude), with the highest correlational relationship between teacher attitude and student growth. Recommendations from the researcher include addition of teacher attitude as a separate construct within teacher efficacy and additional professional learning within the site of the study

Escaldadura superficial em maçãs Granny Smith submetidas ao tratamento térmico com cálcio.

O objetivo deste trabalho foi avaliar o efeito do tratamento térmico combinado com Ca2+ sobre o desenvolvimento de escaldadura superficial em maçãs Granny Smith após o armazenamento refrigerado

Shaping concepts of technology : what concepts and how to shape them?

Philosophy of technology is a discipline that has much to offer for technology education. Insights into the real nature of technology and its relationship with science and society can help technology educators to build a subject that helps pupils get a good concept of technology and to learn to understand and use concepts in technology. Here the way science educators have gained from the philosophy of science, for example in the idea of the way pupils learn concepts by reconstructing pre-concepts that they picked up from daily-life experiences. Research has shown that the learning of concepts and the learning of process skills have to be connected

Mechanisms regulating bitter pit development in Greensleeves apples with suppression of ethylene biosynthesis.

The objectives of this study were to understand the role of ethylene and nutrients (Ca2+,Mg2+, K+ and N) on bitter pit (BP) development in wild type (GS) and ethylene suppressed (68G and 103Y) Greensleeves apples. The transgenic line 68G is suppressed for 1-aminocyclopropane-1-carboxylic acid (ACC) oxidase (ACO) and line 103Y is suppressed for ACC synthase (ACS). Suppression of ethylene biosynthesis reduced BP incidence and severity. Lower ethylene biosynthesis, in ethylene-suppressed genotypes, had no effect on Ca2+, Mg2+, K+ and N concentrations in fruit cortical tissue. In all genotypes, fruit with BP had lower Ca2+ and higher Mg2+ concentrations and higher Mg2+/Ca2+ ratio in cortical tissue. The results indicate that high levels of ethylene biosynthesis and Mg2+ in cortical tissue can enhance fruit susceptibility to BP incidence

Post-bloom and preharvest treatment of Braeburn apple trees with prohexadione-calcium and GA4+7 affects vegetative growth and postharvest incidence of calcium-related physiological disorders and decay in the fruit.

Calcium (Ca) deficiency disorders in apple fruit have been associated with high gibberellins (GAs) activity in the tree. This study was carried out to assess the effects of treatments of ?Braeburn? apple trees with prohexadione-calcium (ProCa, an inhibitor of GAs biosynthesis) or gibberellins (GA4+7) on vegetative growth of the trees and postharvest incidence of Ca-related physiological disorders and decay in the fruit. ProCa (300?mg?L-1) or GA4+7 (300?mg?L-1) treatments were applied post-bloom (PB) and preharvest (PH). PB treatments started 15 days after full bloom (DAFB), with one application every week and six applications in total. PH treatments started five weeks before anticipated harvest (125 DAFB), with one application every week and four applications in total. Control trees were left untreated. When applied PB, ProCa reduced and GA4+7 promoted vegetative growth of the trees. ProCa PB delayed the impairment of xylem functionality (at the proximal region of the fruit) during fruit growth on the tree. Treatments had no effect on fruit weight, pectinmethylesterase (PME) activity or the expression of CAX3, CAX6 and V-ATPase (transporters of Ca into the vacuole) genes assessed in the external cortical tissue at the distal end of the fruit at harvest. When sprayed PB, ProCa increased the total Ca content and reduced K/Ca, Mg/Ca, N/Ca, (Mg?+?K)/Ca and (K?+?Mg?+?N)/Ca ratios in the flesh at the distal portion of the fruit, compared to the treatment with GA4+7, but without differing from the control. In general, ProCa application PB or PH reduced the expression of Ca-ATPase1, Ca-ATPase2, H+-PPase and CAX2 (Ca transporters into the vacuole) genes, increased total water?soluble Ca and reduced electrolyte leakage in the fruit at harvest. After two months of cold storage followed by five days of shelf-life, the incidence and severity of bitter pit (BP) was lower on fruit from trees treated with ProCa PH, and higher on fruit from trees treated with GA4+7 PB. GA4+7 PB also increased the incidence of skin cracking and decay in the fruit. The results showed that ProCa application represents a feasible tool to reduce the incidence of BP. However, ProCa is more effective to reduce BP if applied weekly for five week before harvest

A transcriptome approach towards understanding the development of ripening capacity in Bartlett pears (Pyrus communis L.).

The capacity of European pear fruit (Pyrus communis L.) to ripen after harvest develops during the final stages of growth on the tree. The objective of this study was to characterize changes in Bartlett pear fruit physico-chemical properties and transcription profiles during fruit maturation leading to attainment of ripening capacity

Designing a Good Life: A Matrix for the Technological Mediation of Morality

Technologies fulfill a social role in the sense that they influence the moral actions of people, often in unintended and unforeseen ways. Scientists and engineers are already accepting much responsibility for the technological, economical and environmental aspects of their work. This article asks them to take an extra step, and now also consider the social role of their products. The aim is to enable engineers to take a prospective responsibility for the future social roles of their technologies by providing them with a matrix that helps to explore in advance how emerging technologies might plausibly affect the reasons behind people’s (moral) actions. On the horizontal axis of the matrix, we distinguished the three basic types of reasons that play a role in practical judgment: what is the case, what can be done and what should be done. On the vertical axis we distinguished the morally relevant classes of issues: stakeholders, consequences and the good life. To illustrate how this matrix may work in practice, the final section applies the matrix to the case of the Google PowerMeter

Turn-turn short circuit fault management in permanent magnet machines

This paper presents a systematic study on turn-turn short circuit fault and ways to manage them to provide a basis for comparison of the various options available. The possible methods to reduce the likelihood of the winding SC fault and the fault mitigation techniques related to such faults are discussed. A Finite Element (FE) analysis of a surface-mount Permanent Magnet (PM) machine under application of different mitigation techniques during a turn-turn fault is presented. Both machine and drive structural adaptations for different fault mitigation techniques are addressed. Amongst the investigated fault mitigation techniques, the most promising solution is identified and validated experimentally. It is shown that the shorting terminal method adopting vertical winding arrangement is an effective method in terms of the implementation, reliability and weight