Trojan Horses or Local Allies: Host-country National Managers in Developing Market Subsidiaries

We investigate a multinational corporation's (MNC) decision to appoint host-country national (HCN) managers to foreign subsidiaries based on the institutional context of and familiarity with the host country. HCN managers are commonly associated with specialized knowledge, superior responsiveness, and higher legitimacy. Yet, we argue that local familiarity of HCNs can also be perceived as risky or harmful by MNC parents. We analyze how formal and informal institutions affect the trade-off between positive effects and potential costs associated with HCN managers ("Local allies" vs. "Trojan horses"). We find that legal institutions protect foreign MNCs from potential costs, encourage the use of HCNs and reinforce their benefits. Corruption and corruption distance, however, increase perceived costs associated with HCN managers up to a point at which they outweigh their perceived benefits

Magnetic Material with Large Magnetic-Field-Induced Deformation

A magnetic materials construct and a method to produce the construct are disclosed. The construct exhibits large magnetic-field-induced deformation through the magnetic-field-induced motion of crystallographic interfaces. The construct is a porous, polycrystalline composite structure of nodes connected by struts wherein the struts may be monocrystalline or polycrystalline. If the struts are polycrystalline, they have a bamboo microstructure wherein the grain boundaries traverse the entire width of the strut. The material from which the construct is made is preferably a magnetic shape memory alloy, including polycrystalline Ni-Mn-Ga. The construct is preferably an open-pore foam. The foam is preferably produced with a space-holder technique. Space holders may be dissolvable ceramics and salts including NaAlO2

Recent Developments in Ni-Mn-Ga Foam Research

Grain boundaries hinder twin boundary motion in magnetic shape-memory alloys and suppress magnetic-field-induced deformation in randomly textured polycrystalline material. The quest for high-quality single crystals and the associated costs are a major barrier for the commercialization of magnetic shape-memory alloys. Adding porosity to polycrystalline magnetic-shape memory alloys presents solutions for (i) the elimination of grain boundaries via the separation of neighboring grains by pores, and (ii) the reduction of production cost via replacing the directional solidification crystal growth process by conventional casting. Ni-Mn-Ga foams were produced with varying pore architecture and pore fractions. Thermo-magnetic training procedures were applied to improve magnetic-field-induced strain. The cyclic strain was measured in-situ while the sample was heated and cooled through the martensitic transformation. The magnetic field-induced strain amounts to several percent in the martensite phase, decreases continuously during the transformation upon heating, and vanishes in the austenite phase. Upon cooling, cyclic strain appears below the martensite start temperature and reaches a value larger than the initial strain in the martensite phase, thereby confirming a training effect. For Ni-Mn-Ga single crystals, external constraints imposed by gripping the crystal limit lifetime and/or magnetic-field-induced deformation. These constraints are relaxed for foams

The role of well-child visits in detecting developmental delay in preschool children

Background: Early detection of developmental delay (DD) in preschool children is crucial for counselling parents, initiating diagnostic work-up, and starting early intervention (EI). Methods: We conducted a register study of all preschool children referred for EI in the Canton of Zurich, Switzerland, in 2017 (N = 1,785) and used an online survey among primary care physicians (PCPs, N = 271) to evaluate the care service of DD children. Results: PCPs accounted for 79.5% of all referrals by physicians and had correctly referred over 90% of the children in need of EI at an average age of 39.3 months (SD 8.9). In the survey, which represents 59.2% of all pediatricians and 11.3% of all general practitioners in the Canton, PCPs reported performing a mean of 13.5 (range 0-50, SD 10.7) well-child visits per week to preschool children and estimated well-child visits to be the most frequent type of consultation (66.7%) for the identification of DD. Parents' hesitancy in accepting further evaluation or support were reported by 88.7%. Conclusions: Most preschool children with DD are identified in well-child visits. These visits represent an ideal opportunity for early detection of developmental impairment and initiation of EI. Carefully addressing parents' reservations could reduce the rate of refusal, thus improving early support for children with DD

A parametric study of the acoustic properties of thermal cladding systems

Thermal cladding systems have developed and modernised since the first systems were implemented, and predictions of single figure sound insulation improvement, ΔRW, based on the natural frequency, f0, of the spring-mass covering may no longer be reliable. To identify aspects of the compound acoustic behaviour due to multiple power flow paths of the thermal insulating system, a statistical energy analysis (SEA) based prediction model was developed. A simplified calculation of sound insulation improvement, ΔR, is described, allowing the high frequency (f > f0) behaviour of thermal cladding systems to be predicted. A parametric study in which the impact of different construction materials in the model is discussed; the damping constants, elastic properties of the interlayer and fixings, number of fixings, thickness and material properties (including bending stiffness) of the weatherproof outer layer and the heavyweight wall are assessed. While agreement within 4.0 dB (mean absolute differences) between calculated and measured results for thick render (≥8.0 mm) and curtain wall systems can be obtained at high frequencies (f > f0) using the simplified methodology, this approach was not successful at predicting single figure values. This is because single figure values are weighted towards the low frequencies. Correlation of calculated f0 with measured ΔRW is slightly improved (r.m.s. differences of 2.62 compared with 3.21 using the f0 calculation methodology in EN ISO12354 Annex D) when a modified method to calculate the combined stiffness is used. To improve predictions further, a methodology must be developed to obtain the transfer function, Ytr, used to calculate non-resonant coupling loss factor due to the spring-mass resonance of thermal cladding on the heavyweight wall. The mobility of the connections, Yc, should also be accurately characterised to ensure accurate predictions at high frequencies

Renovation and innovation using thermal insulation lining systems - Acoustic performance

Retrofit and design of thermal cladding systems provide an opportunity to improve the acoustic properties of a building. However, the complexity of the calculation process to predict sound insulation improvement may inhibit rather than encourage novelty and innovation. This paper investigates whether it is realistic to calculate the frequency dependant sound insulation improvement due to modern thermal insulation wall lining systems with just a few input parameters. The calculation procedure is tested using measured results for one external thermal insulation composite system (ETICS) and three curtain wall systems. The accuracy of the procedure is examined using three factors: (1) precision of the measurement, (2) variation of some of the basic parameters of the calculation procedure, and (3) an estimation of the standard error of the calculation. For the ETICS, agreement within <6.0 dB is achieved across much of the frequency range and the trend of the extended dip due to the spring-mass action of the panel is corroborated. The case for using this methodology on curtain wall systems is adequate, however, the trend of calculated results is mostly outside of the 95% confidence limits of the measured results. Possible reasons for this include lack of airtightness of all curtain wall systems and additional transmission due to radiation into and out of the cavity, neither of which are included in the model. The assumption of radiating points or lines, rather than a radiating surface involving the whole panel, gave better agreement at high frequencies for three of the four measured systems (f ≥ 2500 Hz)

Global distribution and bioclimatic characterization of alpine biomes

Although there is a general consensus on the distribution and ecological features of terrestrial biomes, the allocation of alpine ecosystems in the global biogeographic system is still unclear. Here, we delineate a global map of alpine areas above the treeline by modelling regional treeline elevation at 30 m resolution, using global forest cover data and quantile regression. We then used global datasets to 1) assess the climatic characteristics of alpine ecosystems using principal component analysis, 2) define bioclimatic groups by an optimized cluster analysis and 3) evaluate patterns of primary productivity based on the normalized difference vegetation index. As defined here, alpine biomes cover 3.56 Mkm(2) or 2.64% of land outside Antarctica. Despite temperature differences across latitude, these ecosystems converge below a sharp threshold of 5.9 degrees C and towards the colder end of the global climatic space. Below that temperature threshold, alpine ecosystems are influenced by a latitudinal gradient of mean annual temperature and they are climatically differentiated by seasonality and continentality. This gradient delineates a climatic envelope of global alpine biomes around temperate, boreal and tundra biomes as defined in Whittaker's scheme. Although alpine biomes are similarly dominated by poorly vegetated areas, world ecoregions show strong differences in the productivity of their alpine belt irrespectively of major climate zones. These results suggest that vegetation structure and function of alpine ecosystems are driven by regional and local contingencies in addition to macroclimatic factors

Meta-analysis of neural systems underlying placebo analgesia from individual participant fMRI data

The brain systems underlying placebo analgesia are insufficiently understood. Here we performed a systematic, participant-level meta-analysis of experimental functional neuroimaging studies of evoked pain under stimulus-intensity-matched placebo and control conditions, encompassing 603 healthy participants from 20 (out of 28 eligible) studies. We find that placebo vs. control treatments induce small, widespread reductions in pain-related activity, particularly in regions belonging to ventral attention (including mid-insula) and somatomotor networks (including posterior insula). Behavioral placebo analgesia correlates with reduced pain-related activity in these networks and the thalamus, habenula, mid-cingulate, and supplementary motor area. Placebo-associated activity increases occur mainly in frontoparietal regions, with high between-study heterogeneity. We conclude that placebo treatments affect pain-related activity in multiple brain areas, which may reflect changes in nociception and/or other affective and decision-making processes surrounding pain. Between-study heterogeneity suggests that placebo analgesia is a multi-faceted phenomenon involving multiple cerebral mechanisms that differ across studies

A large ungated TPC with GEM amplification

A Time Projection Chamber (TPC) is an ideal device for the detection of charged particle tracks in a large volume covering a solid angle of almost . The high density of hits on a given particle track facilitates the task of pattern recognition in a high-occupancy environment and in addition provides particle identification by measuring the specific energy loss for each track. For these reasons, TPCs with Multiwire Proportional Chamber (MWPC) amplification have been and are widely used in experiments recording heavy-ion collisions. A significant drawback, however, is the large dead time of the order of 1 ms per event generated by the use of a gating grid, which is mandatory to prevent ions created in the amplification region from drifting back into the drift volume, where they would severely distort the drift path of subsequent tracks. For experiments with higher event rates this concept of a conventional TPC operating with a triggered gating grid can therefore not be applied without a significant loss of data. A continuous readout of the signals is the more appropriate way of operation. This, however, constitutes a change of paradigm with considerable challenges to be met concerning the amplification region, the design and bandwidth of the readout electronics, and the data handling. A mandatory prerequisite for such an operation is a sufficiently good suppression of the ion backflow from the avalanche region, which otherwise limits the tracking and particle identification capabilities of such a detector. Gas Electron Multipliers (GEM) are a promising candidate to combine excellent spatial resolution with an intrinsic suppression of ions. In this paper we describe the design, construction and the commissioning of a large TPC with GEM amplification and without gating grid (GEM-TPC). The design requirements have driven innovations in the construction of a light-weight field-cage, a supporting media flange, the GEM amplification and the readout system, which are presented in this paper. We further describe the support infrastructure such as gas, cooling and slow control. Finally, we report on the operation of the GEM-TPC in the FOPI experiment, and describe the calibration procedures which are applied to achieve the design performance of the device.Peer reviewe