A review of micronutrient deficiencies and analysis of maize contribution to nutrient requirements of women and children in Eastern and Southern Africa

This paper reviews and analyses the importance of maize as staple food in Eastern and Southern Africa (E&SA) and contributes in understanding the nexus between maize nutritional composition and prevalence of micronutrient deficiencies (MNDs) in these regions. MNDs remain a major public health concern particularly for women and children, with calcium, iodine, iron, selenium, zinc, folate and vitamin A deficiencies being the most common. Estimates of their prevalence are among the highest in E&SA: iron-deficient anemia affected 26 to 31% of women of reproductive age, and deficiencies up to 53%, 36%, 66%, 75% and 62% for vitamin A, iodine, zinc, calcium and selenium, respectively, were measured in populations of these regions. Besides, these two regions show the highest worldwide maize per capita consumption (g/person/day) as main staple, with 157 in Eastern Africa and 267 in Southern Africa, including up to 444 in Lesotho. The analysis of food composition tables from these regions showed that 100 g of maize foods consumed by these populations could to some extent, contribute in satisfying dietary reference intakes (DRIs) of children and women in energy, proteins, carbohydrates, magnesium, zinc, vitamins B1 and B6. However, it provides very low supply of fats, calcium, sodium, selenium, vitamins C, A and E. The high occurrence of MNDs and considerable nutritional potential of maize consumed in E&SA can be explained by loss of nutrients due to processing practices, low food diversification and reduced nutrients bioavailability. Success cases of the main strategies to tackle the issue of MNDs in these regions by improving maize nutritional quality are discussed in this paper. Maize fortification was shown to improve nutrition and health outcomes of population. Increasing dietary diversity by complementing maize with other foods has improved nutrition through integration of micronutrient-rich foods in the diet. Mostly, biofortification has successfully contributed in reducing vitamin A and zinc deficiencies in rural communities more than nutrient supplementation, fortification and dietary diversity

Written evidence submitted by Canterbury Christ Church University (SH0097) to the House of Commons Environment, Food and Rural Affairs Committee on Soil health. First Report of Session 2023–24, HC 245.

Executive summary Soils are fundamental to ecosystem functioning in agricultural soils and therefore their ability to provide public goods. Agri-environment policy measure progress towards improving soil health through various physio-chemical or biological means; however, these are no longer fit for purpose. This paper is split into two sections: soil health indicators, covering physio-chemical characteristics and biodiversity, and soil contamination, dealing with heavy metals, pharmaceuticals and microplastics. Within this document, we make a series of recommendations to improve monitoring and subsidy schemes under the new Environmental Land Management schemes. New policy frameworks also need to consider known and emerging contaminants if they are to be a true representation of the health of our soils. Recommendations are given below, split into: physio-chemical characteristics, biodiversity, heavy metals, pharmaceuticals and microplastics. Physio-chemical indicators: 1. Expand on the soil health indicators quantified under the ELMS to include several more that are mentioned under the Countryside Survey (i.e. pH, bulk density, soil carbon, organic matter, total nitrogen, mineralizable nitrogen and total phosphorous), and offer a set of relevant tests related to soil health, taking into account basic soil characteristics, cropping systems and/or climate. 2. Subsidise costs of soil testing under the ELMS so that farmers can collect good quality data on soil health before and after management interventions to demonstrate if soil health has been improved. 3. Ensure that all tests have a standardised method for soil sampling, storage and testing to enable comparisons and accurately track long-term changes. 4. There is a risk of low farmer participation due to the loosely defined soil assessment methods. There is a need for clear guidance and defined, but easy to use, methodologies and farmers need to have access to expert advice and guidance. 5. Soil quality indicators should be relatable to a specific ecosystem services/public goods, and farmers need clear guidance on how to interpret the results of their soil tests in this context. 6. Conduct a large-scale monitoring scheme to provide a reference dataset for farmers to compare their soil physio-chemical data to, or create a scoring system that is easy for farmers to interpret to use as a comparison or demonstrate changes in soil health. Biological indicators: 1. Any agreements attaching subsidy payments to improvements in soil biodiversity need to be long-term and might need to include staged and proxy payments. This is to account for the longer timeframe that soil communities may take to respond to new land management approaches compared to physio-chemical characteristics. 2. Current measurements of biological health are no longer appropriate. Since soil biodiversity – especially microbial biodiversity – drives soil functioning and is a key component of soil health, this needs to be included as a soil health indicator under the new ELMS. 3. Although methods for biodiversity assessment using metagenomics are complex, schemes ot monitor soil must be cooperative. Thus, farmers have to be able to on collecting soil samples and sending these for analysis. Similarly, the biodiversity data that is sent back to the farmer also needs to be easily interpreted (i.e. using a simple summary of findings or scoring system). Heavy metals: 1. Expand on heavy metals that are used as soil health indicators under the Countryside Survey (total copper, zinc, cadmium, and nickel) to include several more that are prevalent in agricultural soils. 2. Include contamination as a soil threat and add Action(s) within the ELMS that targets remediation of contaminated soils. Pharmaceuticals: 1. First, there is a need for prioritization: there are more than 1,900 active pharmaceutical compounds in use, making it a challenge to study all of them at once. Prioritization will allow identifying those compounds that can pose the greatest risk to the UK soil, plants, environment, and public health. 2. Soil microbiome is diverse and varies with location, soil type, plants, environmental conditions, and human activities. There is a need to understand the effect of prioritized CECs pharmaceuticals on soil microbiome and its interaction with the rhizosphere in different agroecological zones of the UK. 3. How the presence of prioritized CECs in the soil affects the growth, productivity, and nutritional quality of main UK crops needs to be assessed. This will be achieved by evaluating the mechanisms of absorption, plant uptake and metabolism of CECs in main UK crop species. 4. With the anticipated negative effects of the CECs on agriculture and the environment, strategies for the remediation of prioritized CECs from contaminated soils should be developed. Different available bioremediation approaches need to be tested to identify those who would work on those CECs and in the UK context. 5. Considering the current development of climate change and its impact on agriculture, it is inevitable to assess how climate change is affecting / will affect the prioritized CECs in their interaction with plants and soil. Microplastics: 1. Define ‘microplastics’ clearly as an environmental contaminant in policy documents. 2. More accurate estimates of deliberate and accidental release of plastics are required to reduce uncertainty in approximations of the quantity of plastics entering soils. 3. Well-aligned initiatives, best management practices, more stringent policies and co-operative efforts of the public, manufacturers and government officials are urgently needed to reduce illegal disposal of plastic waste, moderate improper use of plastic products in the agriculture and increase the proportion of plastics undergoing waste management or recycling processes. 4. Better characterisation of MPs (i.e. origin, shape, size, and composition) and evaluation of their in soils (i.e. distribution, transport and degradation) is required, with reference to specific soil characteristics, agricultural systems and climates. 5. Understand how the presence of MPs in the soil affects soil biota and the growth, productivity and nutritional quality of crops, and determine soil guideline values for MPs in soils. 6. Develop a standard set of low-cost, high-efficiency protocols to collect and process soil samples, and then to isolate, identify and quantify microplastics in soils, depending on both the soil characteristics and the type of MPs being quantified

Anomalies of the inferior vena cava: a report of two cases and a short review of the literature

The inferior vena cava, also known as the posterior vena cava, is the large vein that carries de-oxygenated blood from the lower half of the body into the right atrium of the heart. Congenital anomalies of the inferior vena cava result from the persistence of the embryonic venous system. The majority of cases are clinically silent and are diagnosed in routine dissection studies, in retroperitoneal surgeries, or through imaging for other reasons. Although these anomalies are rare, they are of great importance during operations in the abdominal area or in the treatment of thromboembolic diseases. We report two cases of double vena cava and left vena cava, respectively, and a short review of the relevant literature. (Folia Morphol 2010; 69, 3: 123-127

Experimental Analysis on a Low Crested Rubble Mound Breakwater

In the present study, the flow induced by waves around a physical model of a detached low crested rubble mound breakwater is investigated experimentally. The model was designed with a scale factor of 1/30, parallel to the shoreline, in a coast of constant slope 1/15, assuming Froude similarity. For the design of the rock armor layer, the van der Meer\u27s hydraulic stability formula was applied. Two wave conditions were examined: one with an offshore wave height of 2 m (Case A) and one with the maximum annual characteristic offshore wave height (Case B), calculated in prototype scale. Measurements include surface elevation time series, as well as three-dimensional velocity time series of the flow around the model. Results include flow patterns on the seaward and leeward side of the breakwater for both wave conditions, as well as transmission and reflection coefficients. Along the leeward side, the current profiles have an offshore direction close to the bottom and a shoreward direction close to the free surface where the reduction of the water depth induced an acceleration of the flow, influenced by the overtopping. Transmission and reflection coefficients data were compared with literature equations. The comparison revealed that literature equations tended to underestimate the transmission coefficient due to the critical condition represented by a zero free-board breakwater. About the reflection coefficient, it was found that the literature equations tend to overestimate its value, possibly due to the fact that these formulas were obtained by experiments performed with emerged breakwaters

Shared visiting in Equator city

In this paper we describe an infrastructure and prototype system for sharing of visiting experiences across multiple media. The prototype supports synchronous co-visiting by physical and digital visitors, with digital access via either the World Wide Web or 3-dimensional graphics

Field efficacy of aqueous extracts of Artemisia annua, Commelina benghalensis and Euphorbia hirta on rice growth, yield and brown spot disease incidence

Importance of the work: Brown leaf spot disease is one of the major causes of yield losses in rice production in Cameroon. Objectives: To evaluate the bioactivity of aqueous extracts of three Cameroonian medicinal plants on rice growth, yield and brown spot disease incidence. Materials & Methods: Plant extracts were tested at two doses (1 kg/15 L and 2 kg/15 L sprayed), while water and Mancozeb were used as negative and positive controls, respectively, in a split plot design made up of two factors (variety and plant extract). The varieties were NERICA 8, NERICA L56, Long grain red rice and Toukbem. Results: NERICAs 8 and L56 (exotic) and, Toukbem (local) varieties had the highest number of leaves and tillers while Toukbem had the highest plants and leaf area at 9 wk after transplanting. The numbers of leaves (31.3) and tillers (9.7) were significantly (p < 0.05) higher in plants treated with Euphorbia hirta extract at 67 g/L compared to Artemesia annua and Commelina benghalensis extracts. Brown spot severity was lower with E. hirta at 134 g/L (30%) and not significantly different to Mancozeb (23.6%). The NERICA L56 × E. hirta interaction at 134 g/L had the highest yield (5.8 t/ha) compared to the NERICA L56 × Mancozeb (6.1 t/ha) interaction. Chemical analysis of the E. hirta aqueous extract showed the presence of known bioactive compounds. Main finding: Field application of aqueous extract of E. hirta at 134 g/L could be used as a bioagent for rice brown spot management. The formulation of a natural product with this extract is necessary for large-scale field applications

Sampling of an STT event over the Eastern Mediterranean region by lidar and electrochemical sonde

International audienceA two-wavelength ultraviolet (289?316nm) ozone Differential Absorption Lidar (DIAL) system is used to perform ozone measurements in the free troposphere in the Eastern Mediterranean (Northern Greece). The ozone DIAL profiles obtained during a Stratosphere-to-Troposphere Transport (STT) event are compared to that acquired by an electrochemical ozonesonde, in the altitude range between 2 and 10 km. The measurement accuracy of these two instruments is also discussed. The mean difference between the ozone profiles obtained by the two techniques is of the order of 1.11 ppbv (1.86%), while the corresponding standard deviation is 4.69 ppbv (8.16%). A case study of an STT event which occurred on 29 November 2000 is presented and analyzed, using ozone lidar, satellite and meteorological data, as well as air mass back-trajectory analysis. During this STT event ozone mixing ratios of 55?65 ppbv were observed between 5 and 7 km height above sea level (a.s.l.). Stratospheric air was mixed with tropospheric air masses, leading to potential vorticity (PV) losses due to diabatic processes. The ozone DIAL system can be used for following STT events and small-scale mixing phenomena in the free troposphere, and for providing sequences of vertical ozone profiles in the free troposphere. Keywords. Atmospheric composition and structure (Evolution of the atmosphere; Instruments and techniques) ? Meteorology and atmospheric dynamics (Middle atmosphere dynamics; Turbulence

Antifungal potential of extracts from four plants against Acremonium apii and Colletotrichum dematium, two major pathogens of celery (Apium graveolens L.) in Cameroon

In order to contribute to a sustainable control of plant diseases through the use of natural compounds, the antifungal potential of 11 extracts from 4 Cameroonian plants (Ageratum conyzoides, Callistemon citrinus, Cymbopogon citratus and Ocimum gratissimum) was evaluated in vitro against Acremonium apii and Colletotrichum dematium, respectively the causal agents of brown spots and anthracnose diseases of celery (Apium graveolens L.). Inhibition of fungi mycelial growth by essential oils, ethanol and aqueous extracts was assessed by using the supplemented media technique. Essential oils exhibited comparable activities against both fungi with minimum inhibitory concentration between 400 and 6000 ppm. Essential oil from O. gratissimum showed the highest inhibitory activity against both pathogens (400 ppm) followed by C. citratus (700 ppm and 800 ppm against A. apii and C. dematium, respectively), and then C. citrinus (6000 ppm). Ethanol extracts exhibited after the essential oils, the higher inhibitory activity against the two pathogens. Extract of C. citrinus was the most active with reductions of radial growth of 77.68% and 97.16% respectively against A. apii and C. dematium at 10000 ppm. Aqueous extracts at the same concentrations of ethanol extracts had little or no activity against both fungi. The fungitoxic potential of essential oils was higher than the one of the synthetic fungicide used as positive control. Our results suggest a promising potential of essential oils and ethanol extracts for botanicals control of celery fungal pathogens

Antifungal potential of essential oils, aqueous and ethanol extracts of thirteen plants against Fusarium oxysporum f . sp Lycopersici and Phytophtora infestans (Mont.) de Bary as major tomato pathogens

Antifungal activity of essential oils (EO), ethanol extracts (ETE) and cold water extracts (CWE) of thirteen plants was evaluated against Fusarium oxysporum and Phytophtora infestans causal agents of tomato Fusarium wilt and late blight diseases respectively. The supplemented media and slide germination techniques were carried out to determine the effect of extracts on the mycelial growth and conidia germination of pathogens. The results showed that essential oils exhibited the highest antifungal activity followed by ETE and CWE. Callistemon citrinus, Cymbopogon citratus and Ocimum gratissimum essential oils were the most active inhibiting completely radial growth and conidia germination of Phytophtora infestans at 312.5 and 625 µg/ml. Essential oils of Ocimum gratissimum and Cymbopogon citratus inhibited totally the radial growth and conidia germination of Fusarium oxysporum at 625 and 312.5 µg/ml respectively. ETE of Ageratum conyzoides and Callistemon citrinus were the most active inhibiting radial growth of Phytophtora infestans. Cymbopogon citratus and Ocimum gratissimum were the most active against radial growth and conidia germination of Fusarium oxysporum at 6250 µg/ml. The fungi toxic potential of some extracts was comparable to synthetic fungicides used as positive controls. Preliminary phytochemical analysis of ETE and CWE revealed that stronger inhibiting effects were recorded with extracts rich in phenols, flavonoids, tannins, and coumarins. These findings may contribute to develop new green fungicides to protect tomato from Fusarium wilt and late blight diseases