Evaluation of selected chemical processes for production of low-cost silicon

Plant construction costs and manufacturing costs were estimated for the production of solar-grade silicon by the reduction of silicon tetrachloride in a fluidized bed of seed particles, and several modifications of the iodide process using either thermal decomposition on heated filaments (rods) or hydrogen reduction in a fluidized bed of seed particles. Energy consumption data for the zinc reduction process and each of the iodide process options are given and all appear to be acceptable from the standpoint of energy pay back. Information is presented on the experimental zinc reduction of SiCl4 and electrolytic recovery of zinc from ZnCl2. All of the experimental work performed thus far has supported the initial assumption as to technical feasibility of producing semiconductor silicon by the zinc reduction or iodide processes proposed. The results of a more thorough thermodynamic evaluation of the iodination of silicon oxide/carbon mixtures are presented which explain apparent inconsistencies in an earlier cursory examination of the system

Evaluation of selected chemical processes for production of low-cost silicon, phase 2

Potential designs for an integrated fluidized-bed reactor/zinc vaporizer/SiCl4 preheater unit are being considered and heat-transfer calculations have been initiated on versions of the zinc vaporizer section. Estimates of the cost of the silicon prepared in the experimental facility have been made for projected capacities of 25, 50, 75, and 100 metric ton of silicon. A 35 percent saving is obtained in going from 25 metric ton/year to the 50 metric ton/year level. This analysis, coupled with the recognition that use of two reactors in the 50 metric ton/year version allows for continued operation (at reduced capacity) with one reactor shut down, has resulted in a recommendation for adoption of an experimental facility capacity of 50 metric ton/year or greater. At this stage, the change to a larger size facility would not increase the design costs appreciably. In the experimental support program, the effects of seed bed particle size and depth were studied, and operation of the miniplant with a new zinc vaporizer was initiated, revealing the need for modification of the latter

The benefit of poor mixing: kinetics of coacervation

Complex coacervation has become a prominent area of research in the fields of food science, personal care, drug stabilization, and more. However, little has been reported on the kinetics of assembly of coacervation itself. Here, we describe a simple, low-cost way of looking at the kinetics of coacervation by creating poorly mixed samples. In particular, we examine how polymer chain length, the patterning and symmetry of charges on the oppositely charged polyelectrolytes, and the presence of salt and a zwitterionic buffer affect the kinetics of complex coacervation. Our results suggest an interesting relationship between the time for equilibration and the order of addition of polymers with asymmetric patterns of charge. Furthermore, we demonstrated that increasing polymer chain length resulted in a non-monotonic trend in the sample equilibration times as a result of opposing factors such as excluded volume and diffusion. We also observed differences in the rate of sample equilibration based on the presence of a neutral, zwitterionic buffer, as well as the presence and identity of added salt, consistent with previous reports of salt-specific effects on the rheology of complex coacervates. While not a replacement for more advanced characterization strategies, this turbidity-based method could serve as a screening tool to identify interesting and unique phenomena for further study

Evaluation of selected chemical processes for production of low-cost silicon phase 2. silicon material task, low-cost silicon solar array project

Progress from October 1, 1977, through December 31, 1977, is reported in the design of the 50 MT/year experimental facility for the preparation of high purity silicon by the zinc vapor reduction of silicon tetrachloride in a fluidized bed of seed particles to form a free flowing granular product

Symmetry-breaking in chiral polymerisation

We propose a model for chiral polymerisation and investigate its symmetric and asymmetric solutions. The model has a source species which decays into left- and right-handed types of monomer, each of which can polymerise to form homochiral chains; these chains are susceptible to `poisoning' by the opposite handed monomer. Homochiral polymers are assumed to influence the proportion of each type of monomer formed from the precursor. We show that for certain parameter values a positive feedback mechanism makes the symmetric steady-state solution unstable. The kinetics of polymer formation are then analysed in the case where the system starts from zero concentrations of monomer and chains. We show that following a long induction time, extremely large concentrations of polymers are formed for a short time, during this time an asymmetry introduced into the system by a random external perturbation may be massively amplified. The system then approaches one of the steady-state solutions described above.Comment: 26pages, 6 Figure

A Cross-Sectional Study of People with Epilepsy and Neurocysticercosis in Tanzania: Clinical Characteristics and Diagnostic Approaches.

Neurocysticercosis (NCC) is a major cause of epilepsy in regions where pigs are free-ranging and hygiene is poor. Pork production is expected to increase in the next decade in sub-Saharan Africa, hence NCC will likely become more prevalent. In this study, people with epilepsy (PWE, n=212) were followed up 28.6 months after diagnosis of epilepsy. CT scans were performed, and serum and cerebrospinal fluid (CSF) of selected PWE were analysed. We compared the demographic data, clinical characteristics, and associated risk factors of PWE with and without NCC. PWE with NCC (n=35) were more likely to be older at first seizure (24.3 vs. 16.3 years, p=0.097), consumed more pork (97.1% vs. 73.6%, p=0.001), and were more often a member of the Iraqw tribe (94.3% vs. 67.8%, p=0.005) than PWE without NCC (n=177). PWE and NCC who were compliant with anti-epileptic medications had a significantly higher reduction of seizures (98.6% vs. 89.2%, p=0.046). Other characteristics such as gender, seizure frequency, compliance, past medical history, close contact with pigs, use of latrines and family history of seizures did not differ significantly between the two groups. The number of NCC lesions and active NCC lesions were significantly associated with a positive antibody result. The electroimmunotransfer blot, developed by the Centers for Disease Control and Prevention, was more sensitive than a commercial western blot, especially in PWE and cerebral calcifications. This is the first study to systematically compare the clinical characteristics of PWE due to NCC or other causes and to explore the utility of two different antibody tests for diagnosis of NCC in sub-Saharan Africa

Permeability of matrix-fracture systems under mechanical loading – constraints from laboratory experiments and 3-D numerical modelling

The permeability of single fractures is commonly approximated by the cubic law assumption, which is however only valid under the condition of a single phase laminar flow between parallel plates. Departure from cubic law are related to many features like aperture fluctuations due to fracture surface roughness, relative shear displacement, the amount of flow exchange between the matrix and the fracture itself, etc. In order to quantify constitutive relationships among the aforementioned aspects, we have conducted a flow-through experiment with a porous rock sample (Flechtinger sandstone) containing a single macroscopic fracture. Based on this experiment, we obtained range of variations of intrinsic rock parameters, permeability and stress-strain relationships of the combined matrix-fracture system under hydrostatic loading. From the measured deformation of the matrixfracture system, we derived the evolution in the mechanical aperture of the fracture. In order to quantify the processes behind the laboratory observations, we carried out coupled hydro-mechanical simulations of the matrix-fracture system. Navier–Stokes flow was solved in the 3-dimensional open rough fracture domain, and back-coupled to the Darcy flow and the poroelastic behaviour of the rock matrix. The results demonstrate that the elastic behaviour and the related permeability alteration of the fracture domain could be captured by the numerical simulation. Furthermore, the stress-strain values obtained in the vicinity of the fracture asperities suggest that inelastic deformation develops at low mechanical load. An attempt was made to quantify the inelastic deformation by using the failure envelope obtained by laboratory experiments (whether tensile, shear, compaction, or a combination of those). However, change in permeability observed in the experiments are significantly larger than that in the simulation showing the importance of plastic deformation during opening and closure of the fracture and its impact on the cubic law approximation

Profitability as a business goal: the multicriteria approach to the ranking of the five largest Croatian banks

Background: The ranking of commercial banks is usually based on using a single criterion, the size of assets or income. A multicriteria approach allows a more complex analysis of their business efficiency. Objectives: This paper proposes the ranking of banks based on six financial criteria using a multicriteria approach implementing a goal programming model. The criteria are classified into three basic groups: profitability, credit risk and solvency. Methods/Approach: Business performance is evaluated using a score for each bank, calculated as the weighted sum of relative values of individual indicators. Results: In the process of solving the corresponding goal programming problem, the weights are calculated. It is assumed that the goal of each bank is the highest profitability. Because of the market competition among banks, the weights of indicators depend on the performance of each bank. This method is applied to the five biggest Croatian banks (ZABA, PBZ, ERSTE, RBA and HYPO). Conclusion: For the observed period (2010), the highest priority is given to profitability and then to credit risk. The ranking is achieved by using a multicriteria model

Asymmetric bias in user guided segmentations of brain structures

Brain morphometric studies often incorporate comparative hemispheric asymmetry analyses of segmented brain structures. In this work, we present evidence that common user guided structural segmentation techniques exhibit strong left-right asymmetric biases and thus fundamentally influence any left-right asymmetry analyses. In this study, MRI scans from ten pediatric subjects were employed for studying segmentations of amygdala, globus pallidus, putamen, caudate, and lateral ventricle. Additionally, two pediatric and three adult scans were used for studying hippocampus segmentation. Segmentations of the sub-cortical structures were performed by skilled raters using standard manual and semi-automated methods. The left-right mirrored versions of each image were included in the data and segmented in a random order to assess potential left-right asymmetric bias. Using shape analysis we further assessed whether the asymmetric bias is consistent across subjects and raters with the focus on the hippocampus