Demand-point constrained EMS vehicle allocation problems for regions with both urban and rural areas

Governments deal with increasing health care demand and costs, while budgets are tightened. At the same time, ambulance providers are expected to deliver high-quality service at affordable cost. Maximum reliability and minimal availability models guarantee a minimal performance level at each demand point, in contrast to the majority of facility location and allocation methods that guarantee a minimal

Quality of Life 1 Year After Laparoscopic Sleeve Gastrectomy Versus Laparoscopic Roux-en-Y Gastric Bypass: a Randomized Controlled Trial Focusing on Gastroesophageal Reflux Disease

Introduction: Bariatric surgery is the only treatment option that achieves sustained weight loss in obese patients and that also has positive effects on obesity-related comorbidities. Laparoscopic sleeve gastrectomy (LSG) seems to achieve equal weight loss as laparoscopic Roux-en-Y gastric bypass (LRYGB), but there is still much debate about the quality of life (QOL) after LSG, mainly concerning the association with gastroesophageal reflux. Our hypothesis is that QOL after LSG is comparable with QOL after LRYGB. Materials and Methods: Between February 2013 and February 2014, 150 patients were randomized to undergo either LSG or LRYGB in our clinic. Differences in QOL were compared between groups by using multiple QOL questionnaires at follow-up moments preoperatively and 2 and 12 months after surgery. Results: After 12 months of follow-up, 128 patients had returned the questionnaires. Most QOL questionnaires showed significant improvement in scores between the preoperative moment and after 12 months of follow-up. The Gastroesophageal Reflux Disease Questionnaire (GerdQ) score deteriorated in the LSG group after 2 months, but recovered again after 12 months. After 2 months of follow-up, the mean GerdQ score was 6.95 ± 2.14 in the LSG group versus 5.50 ± 1.49 in the LRYGB group (p < 0.001). After 1 year, the mean GerdQ score was 6.63 ± 2.26 in the LSG group and 5.60 ± 1.07 in the LRYGB group (p = 0.001). Conclusion: This randomized controlled trial shows that patients who underwent LSG have significantly higher GerdQ scores at both 2 and 12 months postoperatively than patients who underwent LRYGB, whereas overall QOL did not differ significantly

Sisyphus Cooling of Electrically Trapped Polyatomic Molecules

The rich internal structure and long-range dipole-dipole interactions establish polar molecules as unique instruments for quantum-controlled applications and fundamental investigations. Their potential fully unfolds at ultracold temperatures, where a plethora of effects is predicted in many-body physics, quantum information science, ultracold chemistry, and physics beyond the standard model. These objectives have inspired the development of a wide range of methods to produce cold molecular ensembles. However, cooling polyatomic molecules to ultracold temperatures has until now seemed intractable. Here we report on the experimental realization of opto-electrical cooling, a paradigm-changing cooling and accumulation method for polar molecules. Its key attribute is the removal of a large fraction of a molecule's kinetic energy in each step of the cooling cycle via a Sisyphus effect, allowing cooling with only few dissipative decay processes. We demonstrate its potential by reducing the temperature of about 10^6 trapped CH_3F molecules by a factor of 13.5, with the phase-space density increased by a factor of 29 or a factor of 70 discounting trap losses. In contrast to other cooling mechanisms, our scheme proceeds in a trap, cools in all three dimensions, and works for a large variety of polar molecules. With no fundamental temperature limit anticipated down to the photon-recoil temperature in the nanokelvin range, our method eliminates the primary hurdle in producing ultracold polyatomic molecules. The low temperatures, large molecule numbers and long trapping times up to 27 s will allow an interaction-dominated regime to be attained, enabling collision studies and investigation of evaporative cooling toward a BEC of polyatomic molecules

An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes

In situ X-ray-based measurements of the laser powder bed fusion (LPBF) additive manufacturing process produce unique data for model validation and improved process understanding. Synchrotron X-ray imaging and diffraction provide high resolution, bulk sensitive information with sufficient sampling rates to probe melt pool dynamics as well as phase and microstructure evolution. Here, we describe a laboratory-scale LPBF test bed designed to accommodate diffraction and imaging experiments at a synchrotron X-ray source during LPBF operation. We also present experimental results using Ti-6Al-4V, a widely used aerospace alloy, as a model system. Both imaging and diffraction experiments were carried out at the Stanford Synchrotron Radiation Lightsource. Melt pool dynamics were imaged at frame rates up to 4 kHz with a ∼1.1 μm effective pixel size and revealed the formation of keyhole pores along the melt track due to vapor recoil forces. Diffraction experiments at sampling rates of 1 kHz captured phase evolution and lattice contraction during the rapid cooling present in LPBF within a ∼50 × 100 μm area. We also discuss the utility of these measurements for model validation and process improvement

Subsurface Cooling Rates and Microstructural Response during Laser Based Metal Additive Manufacturing

Laser powder bed fusion (LPBF) is a method of additive manufacturing characterized by the rapid scanning of a high powered laser over a thin bed of metallic powder to create a single layer, which may then be built upon to form larger structures. Much of the melting, resolidification, and subsequent cooling take place at much higher rates and with much higher thermal gradients than in traditional metallurgical processes, with much of this occurring below the surface. We have used in situ high speed X-ray diffraction to extract subsurface cooling rates following resolidification from the melt and above the β-transus in titanium alloy Ti-6Al-4V. We observe an inverse relationship with laser power and bulk cooling rates. The measured cooling rates are seen to correlate to the level of residual strain borne by the minority β-Ti phase with increased strain at slower cooling rates. The α-Ti phase shows a lattice contraction which is invariant with cooling rate. We also observe a broadening of the diffraction peaks which is greater for the β-Ti phase at slower cooling rates and a change in the relative phase fraction following LPBF. These results provide a direct measure of the subsurface thermal history and demonstrate its importance to the ultimate quality of additively manufactured materials

Selecting short-statured children needing growth hormone testing: Derivation and validation of a clinical decision rule

<p>Abstract</p> <p>Background</p> <p>Numerous short-statured children are evaluated for growth hormone (GH) deficiency (GHD). In most patients, GH provocative tests are normal and are thus in retrospect unnecessary.</p> <p>Methods</p> <p>A retrospective cohort study was conducted to identify predictors of growth hormone (GH) deficiency (GHD) in children seen for short stature, and to construct a very sensitive and fairly specific predictive tool to avoid unnecessary GH provocative tests. GHD was defined by the presence of 2 GH concentration peaks < 10 ng/ml. Certain GHD was defined as GHD and viewing pituitary stalk interruption syndrome on magnetic resonance imaging. Independent predictors were identified with uni- and multi-variate analyses and then combined in a decision rule that was validated in another population.</p> <p>Results</p> <p>The initial study included 167 patients, 36 (22%) of whom had GHD, including 5 (3%) with certain GHD. Independent predictors of GHD were: growth rate < -1 DS (adjusted odds ratio: 3.2; 95% confidence interval [1.3–7.9]), IGF-I concentration < -2 DS (2.8 [1.1–7.3]) and BMI z-score ≥ 0 (2.8 [1.2–6.5]). A clinical decision rule suggesting that patients be tested only if they had a growth rate < -1 DS and a IGF-I concentration < -2 DS achieved 100% sensitivity [48–100] for certain GHD and 63% [47–79] for GHD, and a specificity of 68% [60–76]. Applying this rule to the validation population (n = 40, including 13 patients with certain GHD), the sensitivity for certain GHD was 92% [76–100] and the specificity 70% [53–88].</p> <p>Conclusion</p> <p>We have derived and performed an internal validation of a highly sensitive decision rule that could safely help to avoid more than 2/3 of the unnecessary GH tests. External validation of this rule is needed before any application.</p

Determinants of Aortic Stiffness: 16-Year Follow-Up of the Whitehall II Study

Aortic stiffness is a strong predictor of cardiovascular disease endpoints. Cross-sectional studies have shown associations of various cardiovascular risk factors with aortic pulse wave velocity, a measure of aortic stiffness, but the long-term impact of these factors on aortic stiffness is unknown.In 3,769 men and women from the Whitehall II cohort, a wide range of traditional and novel cardiovascular risk factors were determined at baseline (1991-1993) and aortic pulse wave velocity was measured at follow-up (2007-2009). The prospective associations between each baseline risk factor and aortic pulse wave velocity at follow-up were assessed through sex stratified linear regression analysis adjusted for relevant confounders. Missing data on baseline determinants were imputed using the Multivariate Imputation by Chained Equations.Among men, the strongest predictors were waist circumference, waist-hip ratio, heart rate and interleukin 1 receptor antagonist, and among women, adiponectin, triglycerides, pulse pressure and waist-hip ratio. The impact of 10 centimeter increase in waist circumference on aortic pulse wave velocity was twice as large for men compared with women (men: 0.40 m/s (95%-CI: 0.24;0.56); women: 0.17 m/s (95%-CI: -0.01;0.35)), whereas the opposite was true for the impact of a two-fold increase in adiponectin (men: -0.30 m/s (95%-CI: -0.51;-0.10); women: 0.61 m/s (95%-CI: -0.86;-0.35)).In this large prospective study, central obesity was a strong predictor of aortic stiffness. Additionally, heart rate in men and adiponectin in women predicted aortic pulse wave velocity suggesting that strategies to prevent aortic stiffening should be focused differently by sex

Cost-effectiveness of minimal interventional procedures for chronic mechanical low back pain: design of four randomised controlled trials with an economic evaluation

Background: Minimal interventional procedures are frequently applied in patients with mechanical low back pain which is defined as pain presumably resulting from single sources: facet, disc, sacroiliac joint or a combination of these. Usually, these minimal interventional procedures are an integral part of a multidisciplinary pain programme. A recent systematic review issued by the Dutch Health Insurance Council showed that the effectiveness of these procedures for the total group of patients with chronic low back pain is yet unclear and cost-effectiveness unknown. The aim of the study is to evaluate whether a multidisciplinary pain programme with minimal interventional procedures is cost-effective compared to the multidisciplinary pain programme alone for patients with chronic mechanical low back pain who did not respond to conservative primary care and were referred to a pain clinic. Methods. All patients with chronic low back pain who are referred to one of the 13 participating pain clinics will be asked to participate in an observational study. Patients with a suspected diagnosis of facet, disc or sacroiliac joint problems will receive a diagnostic block to confirm this diagnosis. If confirmed, they will be asked to participate in a Randomized Controlled Trial (RCT). For each single source a separate RCT will be conducted. Patients with a combination of facet, disc or sacroiliac joint problems will be invited for participation in a RCT as well. An economic evaluation from a societal perspective will be performed alongside these four RCTs. Patients will complete questionnaires at baseline, 3 and 6 weeks, 3, 6, 9 and 12 months after start of the treatment

Percentiles of fasting serum insulin, glucose, HbA1c and HOMA-IR in pre-pubertal normal weight European children from the IDEFICS cohort

OBJECTIVES: The aim of this study is to present age-and sex-specific reference values of insulin, glucose, glycosylated haemoglobin (HbA1c) and the homeostasis model assessment to quantify insulin resistance (HOMA-IR) for pre-pubertal children. METHODS: The reference population consists of 7074 normal weight 3- to 10.9-year-old pre-pubertal children from eight European countries who participated in at least one wave of the IDEFICS ('identification and prevention of dietary-and lifestyle-induced health effects in children and infants') surveys (2007-2010) and for whom standardised laboratory measurements were obtained. Percentile curves of insulin (measured by an electrochemiluminescence immunoassay), glucose, HbA1c and HOMA-IR were calculated as a function of age stratified by sex using the general additive model for location scale and shape (GAMLSS) method. RESULTS: Levels of insulin, fasting glucose and HOMA-IR continuously show an increasing trend with age, whereas HbA1c shows an upward trend only beyond the age of 8 years. Insulin and HOMA-IR values are higher in girls of all age groups, whereas glucose values are slightly higher in boys. Median serum levels of insulin range from 17.4 and 13.2 pmol l(-1) in 3-< 3.5-year-old girls and boys, respectively, to 53.5 and 43.0 pmol l(-1) in 10.5-< 11-year-old girls and boys. Median values of glucose are 4.3 and 4.5 mmol l(-1) in the youngest age group and 49.3 and 50.6 mmol l(-1) in the oldest girls and boys. For HOMA-IR, median values range from 0.5 and 0.4 in 3-< 3.5-year-old girls and boys to 1.7 and 1.4 in 10.5-< 11-year-old girls and boys, respectively. CONCLUSIONS: Our study provides the first standardised reference values for an international European children's population and provides the, up to now, largest data set of healthy pre-pubertal children to model reference percentiles for markers of insulin resistance. Our cohort shows higher values of Hb1Ac as compared with a single Swedish study while our percentiles for the other glucose metabolic markers are in good accordance with previous studies