The chemistry of ultrasonic degradation of organic compounds

The destruction of toxic organic molecules using advanced oxidation processes (AOPs) is a potent tool for pollution control and environmental protection. Ultrasound is a convenient and effective method of generating hydroxyl radicals which is the key oxidant in AOPs. This review describes the use of ultrasound and associated chemical reactions, with and without additives, as a powerful means of remediating water contaminated with organic pollutants. After a brief introduction to ultrasound and sonochemistry, their application for the oxidation of polycyclic aromatic hydrocarbons, phenol and substituted phenols is considered. Next is the decomposition of chlorinated phenols, and other chlorinated organics, then removal of recalcitrant smaller organic molecules. A discussion follows of recent work that has investigated the effects of initial concentration of substrates; the use of different ultrasonic frequencies; the inclusion of oxidising species, inorganic particles, or salts and their contribution to enhanced degradation. Finally, brief comments are made on the status of ultrasound as an AOP treatment

Industrial wastewater treatment using hydrodynamic cavitation and heterogeneous advanced Fenton processing

A combination of hydrodynamic cavitation and heterogeneous advanced Fenton process (AFP) based on the use of zero valent iron as the catalyst has been investigated for the treatment of real industrial wastewater. The effect of various operating parameters such as inlet pressure, temperature, and the presence of copper windings on the extent of mineralization as measured by total organic carbon (TOC) content have been studied with the aim of maximizing the extent of degradation. It has been observed that increased pressures, higher operating temperature and the absence of copper windings are more favourable for a rapid TOC mineralization. A new approach of latent remediation has also been investigated where hydrodynamic cavitation is only used as a pre-treatment with an aim of reducing the overall cost of pollutant degradation. It has been observed that approach of latent remediation works quite well with about 50–60% removal of TOC using only minimal initial treatment by hydrodynamic cavitation

Intensification of hydroxyl radical production in sonochemical reactors

The efficacy of sonochemical reactors in chemical processing applications has been well established in the laboratory scale of operation though at a given set of operating parameters and no efforts have been directed in terms of maximizing the free radical production. In the present work, the effect of different operating parameters viz. pH, power dissipation into the system, effect of additives such as air, haloalkanes, titanium dioxide, iron and oxygen on the extent of hydroxyl radical formation in a sonochemical reactor have been investigated using salicylic acid dosimetry. Possible mechanisms for oxidation of salicylic acid in the presence of different additives have also been established. It has been observed that acidic conditions under optimized power dissipation in the presence of iron powder and oxygen result in maximum liberation of hydroxyl radicals as quantified by the kinetic rate constant for production of 2,5- and 2,3-dihydroxybenzoic acid. The study has enabled the optimization of the conditions for maximum efficacy of sonochemical reactors where free radical attack is the controlling mechanism for the chemical processing applications

Intensification of oxidation capacity using chloroalkanes as additives in hydrodynamic and acoustic cavitation reactors

The effect of the presence and absence of the chloroalkanes, dichloromethane (CH2Cl2), chloroform (CHCl3) and carbon tetrachloride (CCl4) on the extent of oxidation of aqueous I- to I3- has been investigated in (a) a liquid whistle reactor (LWR) generating hydrodynamic cavitation and (b) an ultrasonic probe, which produces acoustic cavitation. The aim has been to examine the intensification achieved in the extent of oxidation due to the generation of additional free radicals/oxidants in the reactor as a result of the presence of chloroalkanes. It has been observed that the extent of increase in the oxidation reaction is strongly dependent on the applied pressure in the case of the LWR. Also, higher volumes of the chloroalkanes favour the intensification and the order of effectiveness is CCl4> CHCl3 > CH2Cl2. However, the results with the ultrasonic probe suggest that an optimum concentration of CH2Cl2 or CHCl3 exists beyond which there is little increase in the extent of observed intensification. For CCl4, however, no such optimum concentration was observed and the extent of increase in the rates of oxidation reaction rose with the amount of CCl4 added. Stage wise addition of the chloroalkanes was found to give marginally better results in the case of the ultrasonic probe as compared to bulk addition at the start of the run. Although CCl4 is the most effective, its toxicity and carcinogenicity may mean that CH2Cl2 and CHCl3 offer a safer viable alternative and the present work should be useful in establishing the amount of chloroalkanes required for obtaining a suitable degree of intensification

Optimization of a hydrodynamic cavitation reactor using salicylic acid dosimetry

In the present work, optimization of a hydrodynamic cavitation reactor, for maximizing the extent of hydroxyl radical generation, has been investigated using salicylic acid as a dosimeter. The effect of differing operating parameters such as inlet pressure into the reactor, shape of the orifice, and concentration of salicylic acid employed was investigated where the extent of hydroxyl radical generation was quantified in terms of concentration of the hydroxylated products 2,5- and 2,3- dihydroxybenzoic acid. With an upstream pressure of <100 psi no hydroxyl radicals were produced but excellent results were obtained with a small circular nozzle at 4000 psi and a salicylate concentration of 750 ppm. The use of a combination of ultrasound along with hydrodynamic cavitation is also reported for the first time and results in a 15% improvement in the hydroxyl radical generation when the distance between the orifice and transducer is 5 mm to 10 mm

The electron thermal propagator at p>>T: An entire function of p_{0}

The retarded electron propagator S_{R}(p_{0},p) at high momentum p>>T was shown by Blaizot and Iancu to be an entire function of complex p_{0}. In this paper a specific form for S_{R}(p_{0},p) is obtained and checked by showing that its temporal Fourier transform S_{R}(t, p) has the correct behavior at large t. Potential infrared and collinear divergences from the emission of soft photons do not occur.Comment: 8 page

Flux Stabilization in 6 Dimensions: D-terms and Loop Corrections

We analyse D-terms induced by gauge theory fluxes in the context of 6-dimensional supergravity models. On the one hand, this is arguably the simplest concrete setting in which the controversial idea of `D-term uplifts' can be investigated. On the other hand, it is a very plausible intermediate step on the way from a 10d string theory model to 4d phenomenology. Our specific results include the flux-induced one-loop correction to the scalar potential coming from charged hypermultiplets. Furthermore, we comment on the interplay of gauge theory fluxes and gaugino condensation in the present context, demonstrate explicitly how the D-term arises from the gauging of one of the compactification moduli, and briefly discuss further ingredients that may be required for the construction of a phenomenologically viable model. In particular, we show how the 6d dilaton and volume moduli can be simultaneously stabilized, in the spirit of KKLT, by the combination of an R symmetry twist, a gaugino condensate, and a flux-induced D-term.Comment: 24 pages, 1 figure v2:minor correction

The subconvexity problem for \GL_{2}

Generalizing and unifying prior results, we solve the subconvexity problem for the $L$-functions of \GL_{1} and \GL_{2} automorphic representations over a fixed number field, uniformly in all aspects. A novel feature of the present method is the softness of our arguments; this is largely due to a consistent use of canonically normalized period relations, such as those supplied by the work of Waldspurger and Ichino--Ikeda.Comment: Almost final version to appear in Publ. Math IHES. References updated

Instances and connectors : issues for a second generation process language

This work is supported by UK EPSRC grants GR/L34433 and GR/L32699Over the past decade a variety of process languages have been defined, used and evaluated. It is now possible to consider second generation languages based on this experience. Rather than develop a second generation wish list this position paper explores two issues: instances and connectors. Instances relate to the relationship between a process model as a description and the, possibly multiple, enacting instances which are created from it. Connectors refers to the issue of concurrency control and achieving a higher level of abstraction in how parts of a model interact. We believe that these issues are key to developing systems which can effectively support business processes, and that they have not received sufficient attention within the process modelling community. Through exploring these issues we also illustrate our approach to designing a second generation process language.Postprin

Measuring the capability to raise revenue process and output dimensions and their application to the Zambia revenue authority

The worldwide diffusion of the good governance agenda and new public management has triggered a renewed focus on state capability and, more specifically, on the capability to raise revenue in developing countries. However, the analytical tools for a comprehensive understanding of the capability to raise revenue remain underdeveloped. This article aims at filling this gap and presents a model consisting of the three process dimensions ‘information collection and processing’, ‘merit orientation’ and ‘administrative accountability’. ‘Revenue performance’ constitutes the fourth capability dimension which assesses tax administration’s output. This model is applied to the case of the Zambia Revenue Authority. The dimensions prove to be valuable not only for assessing the how much but also the how of collecting taxes. They can be a useful tool for future comparative analyses of tax administrations’ capabilities in developing countries.Die weltweite Verbreitung der Good-Governance- und New-Public-Management-Konzepte hat zu einer zunehmenden Konzentration auf staatliche Leistungsfähigkeit und, im Besonderen, auf die Leistungsfähigkeit der Steuererhebung in Entwicklungsländern geführt. Allerdings bleiben die analytischen Werkzeuge für ein umfassendes Verständnis von Leistungsfähigkeit unterentwickelt. Dieser Artikel stellt hierfür ein Modell vor, das die drei Prozess-Dimensionen „Sammeln und Verarbeiten von Informationen“, „Leistungsorientierung der Mitarbeiter“ und „Verantwortlichkeit der Verwaltung“ beinhaltet. „Einnahmeperformanz“ ist die vierte Dimension und erfasst den Output der Steuerverwaltung. Das mehrdimensionale Modell wird für die Analyse der Leistungsfähigkeit der Steuerbehörde Zambias (Zambia Revenue Authority) genutzt. Es erweist sich nicht nur für die Untersuchung des Wieviel, sondern auch des Wie des Erhebens von Steuern als wertvoll. Die vier Dimensionen können in Zukunft zur umfassenden und vergleichenden Analyse der Leistungsfähigkeit verschiedener Steuerverwaltungen in Entwicklungsländern genutzt werden