Analysis of irradiated U-7wt%Mo dispersion fuel microstructures using automated image processing

The High Performance Research Reactor Fuel Development (HPPRFD) program is responsible for developing low enriched uranium (LEU) fuel substitutes for high performance reactors fueled with highly enriched uranium (HEU) that have not yet been converted to LEU. The uranium-molybdenum (U-Mo) fuel system was selected for this effort. In this study, fission gas pore segmentation was performed on U-7wt%Mo dispersion fuel samples at three separate fission densities using an automated image processing interface developed in MATLAB. Pore size distributions were attained that showed both expected and unexpected fission gas behavior. In general, it proved challenging to identify any dominant trends when comparing fission bubble data across samples from different fuel plates due to varying compositions and fabrication techniques. The results exhibited fair agreement with the fission density vs. porosity correlation developed by the Russian reactor conversion program.Keywords: Automated image analysis, Fission bubbles, Porosity, Nuclear fuel, MATLAB, Fission densit

Distribution of lithostratigraphic units within the central block of Yucca Mountain, Nevada: A three-dimensional computer-based model, Version YMP.R2.0

Yucca Mountain, Nevada is underlain by 14.0 to 11.6 Ma volcanic rocks tilted eastward 3{degree} to 20{degree} and cut by faults that were primarily active between 12.7 and 11.6 Ma. A three-dimensional computer-based model of the central block of the mountain consists of seven structural subblocks composed of six formations and the interstratified-bedded tuffaceous deposits. Rocks from the 12.7 Ma Tiva Canyon Tuff, which forms most of the exposed rocks on the mountain, to the 13.1 Ma Prow Pass Tuff are modeled with 13 surfaces. Modeled units represent single formations such as the Pah Canyon Tuff, grouped units such as the combination of the Yucca Mountain Tuff with the superjacent bedded tuff, and divisions of the Topopah Spring Tuff such as the crystal-poor vitrophyre interval. The model is based on data from 75 boreholes from which a structure contour map at the base of the Tiva Canyon Tuff and isochore maps for each unit are constructed to serve as primary input. Modeling consists of an iterative cycle that begins with the primary structure-contour map from which isochore values of the subjacent model unit are subtracted to produce the structure contour map on the base of the unit. This new structure contour map forms the input for another cycle of isochore subtraction to produce the next structure contour map. In this method of solids modeling, the model units are presented by surfaces (structure contour maps), and all surfaces are stored in the model. Surfaces can be converted to form volumes of model units with additional effort. This lithostratigraphic and structural model can be used for (1) storing data from, and planning future, site characterization activities, (2) preliminary geometry of units for design of Exploratory Studies Facility and potential repository, and (3) performance assessment evaluations

Commissioning of the vacuum system of the KATRIN Main Spectrometer

The KATRIN experiment will probe the neutrino mass by measuring the beta-electron energy spectrum near the endpoint of tritium beta-decay. An integral energy analysis will be performed by an electro-static spectrometer (Main Spectrometer), an ultra-high vacuum vessel with a length of 23.2 m, a volume of 1240 m^3, and a complex inner electrode system with about 120000 individual parts. The strong magnetic field that guides the beta-electrons is provided by super-conducting solenoids at both ends of the spectrometer. Its influence on turbo-molecular pumps and vacuum gauges had to be considered. A system consisting of 6 turbo-molecular pumps and 3 km of non-evaporable getter strips has been deployed and was tested during the commissioning of the spectrometer. In this paper the configuration, the commissioning with bake-out at 300{\deg}C, and the performance of this system are presented in detail. The vacuum system has to maintain a pressure in the 10^{-11} mbar range. It is demonstrated that the performance of the system is already close to these stringent functional requirements for the KATRIN experiment, which will start at the end of 2016.Comment: submitted for publication in JINST, 39 pages, 15 figure

Burden of paediatric Rotavirus Gastroenteritis (RVGE) and potential benefits of a universal Rotavirus vaccination programme with a pentavalent vaccine in Spain

<p>Abstract</p> <p>Background</p> <p>Rotavirus is the most common cause of gastroenteritis in young children worldwide. The aim of the study was to assess the health outcomes and the economic impact of a universal rotavirus vaccination programme with RotaTeq, the pentavalent rotavirus vaccine, versus no vaccination programme in Spain.</p> <p>Methods</p> <p>A birth cohort was followed up to the age of 5 using a cohort model. Epidemiological parameters were taken from the REVEAL study (a prospective epidemiological study conducted in Spain, 2004-2005) and from the literature. Direct and indirect costs were assessed from the national healthcare payer and societal perspectives by combining health care resource utilisation collected in REVEAL study and unit costs from official sources. RotaTeq per protocol efficacy data was taken from a large worldwide rotavirus clinical trial (70,000 children). Health outcomes included home care cases, General Practioner (GP)/Paediatrician, emergency department visits, hospitalisations and nosocomial infections.</p> <p>Results</p> <p>The model estimates that the introduction of a universal rotavirus vaccination programme with RotaTeq (90% coverage rate) would reduce the rotavirus gastroenteritis (RVGE) burden by 75% in Spain; 53,692 home care cases, 35,187 GP/Paediatrician visits, 34,287 emergency department visits, 10,987 hospitalisations and 2,053 nosocomial infections would be avoided. The introduction of RotaTeq would avoid about 76% of RVGE-related costs from both perspectives: €22 million from the national health system perspective and €38 million from the societal perspective.</p> <p>Conclusions</p> <p>A rotavirus vaccination programme with RotaTeq would reduce significantly the important medical and economic burden of RVGE in Spain.</p

Commissioning of the vacuum system of the KATRIN Main Spectrometer

The KATRIN experiment will probe the neutrino mass by measuring the -electron energy spectrum near the endpoint of tritium -decay. An integral energy analysis will be performed by an electro-static spectrometer (“Main Spectrometer”), an ultra-high vacuum vessel with a length of 23.2 m, a volume of 1240m3, and a complex inner electrode system with about 120 000 individual parts. The strong magnetic field that guides the -electrons is provided by super-conducting solenoids at both ends of the spectrometer. Its influence on turbo-molecular pumps and vacuum gauges had to be considered. A system consisting of 6 turbo-molecular pumps and 3 km of non-evaporable getter strips has been deployed and was tested during the commissioning of the spectrometer. In this paper the configuration, the commissioning with bake-out at 300 C, and the performance of this system are presented in detail. The vacuum system has to maintain a pressure in the 10$^{-11}$ mbar range. It is demonstrated that the performance of the system is already close to these stringent functional requirements for the KATRIN experiment, which will start at the end of 2016

Slow-moving and far-travelled dense pyroclastic flows during the Peach Spring super-eruption

International audienceExplosive volcanic super-eruptions of several hundred cubic kilometres or more generate long run-out pyroclastic density currents the dynamics of which are poorly understood and controversial. Deposits of one such event in the southwestern USA, the 18.8 Ma Peach Spring Tuff, were formed by pyroclastic flows that travelled 4170 km from the eruptive centre and entrained blocks up to B70–90 cm diameter from the substrates along the flow paths. Here we combine these data with new experimental results to show that the flow's base had high-particle concentration and relatively modest speeds of B5–20 m s À 1 , fed by an eruption discharging magma at rates up to B10 7 –10 8 m 3 s À 1 for a minimum of 2.5–10 h. We conclude that sustained high-eruption discharge and long-lived high-pore pressure in dense granular dispersion can be more important than large initial velocity and turbulent transport with dilute suspension in promoting long pyroclastic flow distance

Constraint-induced movement therapy for children with obstetric brachial plexus palsy

The objective of this pilot study was to investigate the feasibility of constraint-induced movement therapy (CIMT) in children with obstetric brachial plexus palsy and receive preliminary information about functional improvements. Two patients (age 12 years) with obstetric brachial plexus palsy were included for a 126-h home-based CIMT intervention (3 and 4.5 weeks) and weekly monitored with the Melbourne Assessment of Unilateral Upper Limb function and the Nine-hole Peg Test. The Assisted Hand Assessment was performed 3 weeks before the beginning of intervention, preintervention, postintervention, and at 3 weeks follow-up (ABA single-case design). Tests were analyzed descriptively, visually, and where possible, using a time series analysis with C statistic. Results revealed changes of arm function in both patients between preintervention and follow-up test as follows: Assisted Hand Assessment from 85 to 92% in patient A and 80 to 89% in patient B, in the Melbourne Assessment of Unilateral Upper Limb function from 87 to 90% (C=0.578, z=1.876, P<0.05) in patient A and 72 to 80% (C=0.827, z=2.68, P<0.005) in patient B. There was no improvement in the Nine-hole Peg Test in both patients. Improvements as a result of CIMT found in this pilot study may not be considered substantial. However, they justify further research as some findings indicate relationship to the CIMT intervention in the 'B' phase. To enhance motivation and to plan a controlled, randomized clinical trial, child-friendly applications of the CIMT concept and adequate measures to monitor compliance are being discussed