17,117 research outputs found
TALOS: A distributed architecture for intelligent monitoring and anomaly diagnosis of the Hubble Space Telescope
Lockheed, the Hubble Space Telescope Mission Operations Contractor, is currently engaged in a project to develop a distributed architecture of communicating expert systems to support vehicle operations. This architecture, named Telemetry Analysis Logic for Operating Spacecraft (TALOS), has the potential for wide applicability in spacecraft operations. The architecture mirrors the organization of the human experts within an operations control center
Development of a gas pressure bonded four-pole alternator rotor
Methods were developed for fabrication of a solid four pole alternator rotor by hot isostatic pressure welding. The rotor blanks welded in this program had complex geometrical mating interfaces and were of considerable bulk, being approximately 3-1/2 inches (0.089 meters) in diameter and 14 inches (0.356 meters) long. Magnetic end pieces were machined from AlSl 4340 steel, while the non-magnetic central section was of Inconel 718. Excellent welds were produced which were shown to be responsive to post weld heat treatments which substantially improved joint strength. Prior to welding the rotors, test specimens of complex geometry were welded to demonstrate that complex surfaces with intentional mechanical misfit could be readily joined using HIP welding. This preliminary work demonstrated not only that interface compliance is achieved during welding but that welding pressure is developed in these thick sections sufficient to produce sound joints. Integral weld-heat treatment cycles were developed that permitted the attainment of magnetic properties while minimizing residual stress associated with the allotropic transformation of 4340 steel
Arrest of flow and emergence of activated processes at the glass transition of a suspension of particles with hard sphere-like interactions
By combining aspects of the coherent and self intermediate scattering
functions, measured by dynamical light scattering on a suspension of hard
sphere-like particles, we show that the arrest of particle number density
fluctuations spreads from the position of the main structure factor peak.
Taking the velocity auto-correlation function into account we propose that as
density fluctuations are arrested the system's ability to respond to diffusing
momentum currents is impaired and, accordingly, the viscosity increases. From
the stretching of the coherent intermediate scattering function we read a
quantitative manifestation of the undissipated thermal energy, the source of
those, ergodicity restoring, processes that short-circuit the sharp transition
to a perfect glass.Comment: 9 pages, 4 figure
Development and study of chemical vapor deposited tantalum base alloys
A technique for the chemical vapor deposition of alloys was developed. The process, termed pulsing, involves the periodic injection of reactant gases into a previously-evacuated reaction chamber where they blanket the substrate almost instantaneously. Formation of alternating layers of the alloy components and subsequent homogenization allows the formation of an alloy of uniform composition with the composition being determined by the duration and relative numbers of the various cycles. The technique has been utilized to produce dense alloys of uniform thickness and composition (Ta- 10 wt % W) by depositing alternating layers of Ta and W by the hydrogen reduction of TaCl5 and WCl6. A similar attempt to deposit a Ta - 8 wt % W - 2 wt% Hf alloy was unsuccessful because of the difficulty in reducing HfCl4 at temperatures below those at which gas phase nucleation of Ta and W occurred
Temperature and Field Dependence of Magnetic Domains in LaSrMnO
Colossal magnetoresistance and field-induced ferromagnetism are well
documented in manganite compounds. Since domain wall resistance contributes to
magnetoresistance, data on the temperature and magnetic field dependence of the
ferromagnetic domain structure are required for a full understanding of the
magnetoresistive effect. Here we show, using cryogenic Magnetic Force
Microscopy, domain structures for the layered manganite
LaSrMnO as a function of temperature and magnetic
field. Domain walls are suppressed close to the Curie temperature T, and
appear either via the application of a c-axis magnetic field, or by decreasing
the temperature further. At temperatures well below T, new domain walls,
stable at zero field, can be formed by the application of a c-axis field.
Magnetic structures are seen also at temperatures above T: these features
are attributed to inclusions of additional Ruddleston-Popper manganite phases.
Low-temperature domain walls are nucleated by these ferromagnetic inclusions.Comment: 6 figure
Tough soluble aromatic thermoplastic copolyimides
Tough, soluble, aromatic, thermoplastic copolyimides were prepared by reacting 4,4'-oxydiphthalic anhydride, 3,4,3',4'-biphenyltetracarboxylic dianhydride and 3,4'-oxydianiline. Alternatively, these copolyimides may be prepared by reacting 4,4'-oxydiphthalic anhydride with 3,4,3',4'-biphenyltetracarboxylic dianhydride and 3,4'-oxydiisocyanate. Also, the copolyimide may be prepared by reacting the corresponding tetra acid and ester precursors of 4,4'-oxydiphthalic anhydride and 3,4,3',4'-biphenyltetracarboxylic dianhydride with 3,4'-oxydianiline. These copolyimides were found to be soluble in common amide solvents such as N,N'-dimethyl acetamide, N-methylpyrrolidinone, and dimethylformamide allowing them to be applied as the fully imidized copolymer and to be used to prepare a wide range of articles
- …