Comment on "Quantum Confinement and Optical Gaps in Si Nanocrystals"

We show that the method used by Ogut, Chelikowsky and Louie (Phys. Rev. Lett. 79, 1770 (1997)) to calculate the optical gap of Si nanocrystals omits an electron-hole polarization energy. When this contribution is taken into account, the corrected optical gap is in excellent agreement with semi-empirical pseudopotential calculations.Comment: 3 pages, 1 figur

Two wheeled lunar dumptruck

The design of a two wheel bulk material transport vehicle is described in detail. The design consists of a modified cylindrical bowl, two independently controlled direct drive motors, and two deformable wheels. The bowl has a carrying capacity of 2.8 m (100 ft) and is constructed of aluminum. The low speed, high HP motors are directly connected to the wheels, thus yielding only two moving parts. The wheels, specifically designed for lunar applications, utilize the chevron tread pattern for optimum traction. The vehicle is maneuvered by varying the relative angular velocities of the wheels. The bulk material being transported is unloaded by utilizing the motors to oscillate the bowl back and forth to a height at which dumping is achieved. The analytical models were tested using a scaled prototype of the lunar transport vehicle. The experimental data correlated well with theoretical predictions. Thus, the design established provides a feasible alternative for the handling of bulk material on the moon

Growth of sulphuric acid nanoparticles under wet and dry conditions

New particle formation, which greatly influences the number concentrations and size distributions of an atmospheric aerosol, is often followed by a rapid growth of freshly formed particles. The initial growth of newly formed aerosol is the crucial process determining the fraction of nucleated particles growing to cloud condensation nuclei sizes, which have a significant influence on climate. In this study, we report the laboratory observations of the growth of nanoparticles produced by nucleation of H₂SO₄ and water in a laminar flow tube at temperatures of 283, 293 and 303 K, under dry (a relative humidity of 1%) and wet conditions (relative humidity of 30%) and residence times of 30, 45, 60 and 90 s. The initial H₂SO₄ concentration spans the range from 2 × 10⁸ to 1.4 × 10¹⁰ molecule cm⁻³ and the calculated wall losses of H₂SO₄ were assumed to be diffusion limited. The detected particle number concentrations, measured by the Ultrafine Condensation Particle Counter (UCPC) and Differential Mobility Particle Sizer (DMPS), were found to depend strongly on the residence time. Hygroscopic particle growth, presented by growth factors, was found to be in good agreement with the previously reported studies. The experimental growth rates ranged from 20 nm h⁻¹ to 890 nm h⁻¹ at relative humidity (RH) 1% and from 7 nm h⁻¹ to 980 nm h⁻¹ at RH 30% and were found to increase significantly with the increasing concentration of H₂SO₄. Increases in the nucleation temperature had a slight enhancing effect on the growth rates under dry conditions. The influence of relative humidity on growth was not consistent – at lower H₂SO₄ concentrations, the growth rates were higher under dry conditions while at H₂SO₄ concentrations greater than 1 × 10¹⁰ molecule cm⁻³, the growth rates were higher under wet conditions. The growth rates show only a weak dependence on the residence time. The experimental observations were compared with predictions made using a numerical model, which investigates the growth of particles with three different extents of neutralization by ammonia, NH₃: (1) pure H₂SO₄ – H₂O particles; (2) particles formed by ammonium bisulphate, (NH₄)HSO₄; (3) particles formed by ammonium sulphate, (NH₄)₂SO₄. The highest growth rates were found for ammonium sulphate particles. Since the model accounting for the initial H₂SO₄ concentration predicted the experimental growth rates correctly, our results suggest that the commonly presumed diffusional wall losses of H₂SO₄ in case of long-lasting experiments are not so significant. We therefore assume that there are not only losses of H₂SO₄ on the wall, but also a flux of H₂SO₄ molecules from the wall into the flow tube, the effect being more profound under dry conditions and at higher temperatures of the tube wall. Based on a comparison with the atmospheric observations, our results indicate that sulphuric acid alone cannot explain the growth rates of particles formed in the atmosphere

Graphene Oxidation: Thickness Dependent Etching and Strong Chemical Doping

Patterned graphene shows substantial potential for applications in future molecular-scale integrated electronics. Environmental effects are a critical issue in a single layer material where every atom is on the surface. Especially intriguing is the variety of rich chemical interactions shown by molecular oxygen with aromatic molecules. We find that O2 etching kinetics vary strongly with the number of graphene layers in the sample. Three-layer-thick samples show etching similar to bulk natural graphite. Single-layer graphene reacts faster and shows random etch pits in contrast to natural graphite where nucleation occurs at point defects. In addition, basal plane oxygen species strongly hole dope graphene, with a Fermi level shift of ~0.5 eV. These oxygen species partially desorb in an Ar gas flow, or under irradiation by far UV light, and readsorb again in an O2 atmosphere at room temperature. This strongly doped graphene is very different than graphene oxide made by mineral acid attack.Comment: 15 pages, 5 figure

Magnetic phase transition in V2O3 nanocrystals

V2O3 nanocrystals can be synthesized through hydrothermal reduction of VO(OH)2 using hydrazine as a reducing agent. Addition of different ligands to the reaction produces nanoparticles, nanorods and nanoplatelets of different sizes. Small nanoparticles synthesized in this manner show suppression of the magnetic phase transition to lower temperatures. Using muon spin relaxation spectroscopy and synchrotron x-ray diffraction, it is determined that the volume fraction of the high-temperature phase, characterized by a rhombohedral structure and paramagnetism, gradually declines with decreasing temperature, in contrast to the sharp transition observed in bulk V2O3.Comment: 6 pages, 6 figure

Theory of Luminescent Emission in Nanocrystal ZnS:Mn with an Extra Electron

We consider the effect of an extra electron injected into a doped quantum dot $ZnS:Mn^{2+}$. The Coulomb interaction and the exchange interaction between the extra electron and the states of the Mn ion will mix the wavefunctions, split the impurity energy levels, break the previous selection rules and change the transition probabilities. Using this model of an extra electron in the doped quantum dot, we calculated the energy and the wavefunctions, the luminescence probability and the transition lifetime and compare with the experiments. Our calculation shows that two orders of magnitudes of lifetime shortening can occur in the transition $^4T_1-^6A_1$ when an extra electron is present.Comment: 15 pages, 2 Figs No change in Fig

Synthesis of CdS and CdSe nanocrystallites using a novel single-molecule precursors approach

The synthesis of CdS and CdSe nanocrystallites using the thermolysis of several dithioor diselenocarbamato complexes of cadmium in trioctylphosphine oxide (TOPO) is reported. The nanodispersed materials obtained show quantum size effects in their optical spectra and exhibit near band-edge luminescence. The influence of experimental parameters on the properties of the nanocrystallites is discussed. HRTEM images of these materials show well-defined, crystalline nanosized particles. Standard size fractionation procedures can be performed in order to narrow the size dispersion of the samples. The TOPO-capped CdS and CdSe nanocrystallites and simple organic bridging ligands, such as 2,2¢-bipyrimidine, are used as the starting materials for the preparation of novel nanocomposites. The optical properties shown by these new nanocomposites are compared with those of the starting nanodispersed materials

Increased susceptibility to proactive interference in adults with dyslexia?

Recent findings show that people with dyslexia have an impairment in serial-order memory. Based on these findings, the present study aimed to test the hypothesis that people with dyslexia have difficulties dealing with proactive interference (PI) in recognition memory. A group of 25 adults with dyslexia and a group of matched controls were subjected to a 2-back recognition task, which required participants to indicate whether an item (mis)matched the item that had been presented 2 trials before. PI was elicited using lure trials in which the item matched the item in the 3-back position instead of the targeted 2-back position. Our results demonstrate that the introduction of lure trials affected 2-back recognition performance more severely in the dyslexic group than in the control group, suggesting greater difficulty in resisting PI in dyslexia.Peer reviewedFinal Accepted Versio

A pseudopotential study of electron-hole excitations in colloidal, free-standing InAs quantum dots

Excitonic spectra are calculated for free-standing, surface passivated InAs quantum dots using atomic pseudopotentials for the single-particle states and screened Coulomb interactions for the two-body terms. We present an analysis of the single particle states involved in each excitation in terms of their angular momenta and Bloch-wave parentage. We find that (i) in agreement with other pseudopotential studies of CdSe and InP quantum dots, but in contrast to k.p calculations, dot states wavefunction exhibit strong odd-even angular momentum envelope function mixing (e.g. $s$ with $p$) and large valence-conduction coupling. (ii) While the pseudopotential approach produced very good agreement with experiment for free-standing, colloidal CdSe and InP dots, and for self-assembled (GaAs-embedded) InAs dots, here the predicted spectrum does {\em not} agree well with the measured (ensemble average over dot sizes) spectra. (1) Our calculated excitonic gap is larger than the PL measure one, and (2) while the spacing between the lowest excitons is reproduced, the spacings between higher excitons is not fit well. Discrepancy (1) could result from surface states emission. As for (2), agreement is improved when account is taken of the finite size distribution in the experimental data. (iii) We find that the single particle gap scales as $R^{-1.01}$ (not $R^{-2}$), that the screened (unscreened) electron-hole Coulomb interaction scales as $R^{-1.79}$ ($R^{-0.7}$), and that the eccitonic gap sclaes as $R^{-0.9}$. These scaling laws are different from those expected from simple models.Comment: 12 postscript figure

Photodiode based on epitaxial silicon with high sensitivity at the wavelength 254 nm

A mathematical model of the construction of silicon photodiode based on epitaxial structure enabling to regulate the absorption edge of silicon in the long-wave spectral range is presented. The suggested model allows calculating the construction that possesses low sensitivity for the wavelengths larger than 600 nm and maximal values near the wavelength 254 nm