Causal connection in parsec-scale relativistic jets: results from the MOJAVE VLBI survey

We report that active galactic nucleus (AGN) jets are causally connected on parsec scales, based on 15 GHz Very Long Baseline Array (VLBA) data from a sample of 133 AGN jets. This result is achieved through a new method for measuring the product of the jet Lorentz factor and the intrinsic opening angle Gamma*theta_j from measured apparent opening angles in flux density limited samples of AGN jets. The Gamma*theta_j parameter is important for jet physics because it is related to the jet-frame sidewise expansion speed and causal connection between the jet edges and its symmetry axis. Most importantly, the standard model of jet production requires that the jet be causally connected with its symmetry axis, implying that Gamma*theta_j < 1. When we apply our method to the MOJAVE flux density limited sample of radio loud objects, we find Gamma*theta_j = 0.2, implying that AGN jets are causally connected. We also find evidence that AGN jets viewed very close to the line of sight effectively have smaller intrinsic opening angles compared with jets viewed more off-axis, which is consistent with Doppler beaming and a fast inner spine/slow outer sheath velocity field. Notably, gamma-ray burst (GRB) jets have a typical Gamma*theta_j that is two orders of magnitude higher, suggesting that different physical mechanisms are at work in GRB jets compared to AGN jets. A useful application of our result is that a jet's beaming parameters can be derived. Assuming Gamma*theta_j is approximately constant in the AGN jet population, an individual jet's Doppler factor and Lorentz factor (and therefore also its viewing angle) can be determined using two observable quantities: apparent jet opening angle and the apparent speed of jet components.Comment: 9 pages, 4 figure

Nearly 6.4 Million Californians Lacked Health Insurance in 2007 -- Recession Likely to Reverse Small Gains in Coverage

Summarizes findings from the California Health Interview Survey (CHIS) on trends in the state's uninsured rate, the underlying factors, and projected trends. Points to flaws in the eligibility rules for public coverage and outlines policy implications

Geoid undulations and gravity anomalies over the Aral Sea, the Black Sea and the Caspian Sea from a combined GEOS-3/SEASAT/GEOSAT altimeter data set

Satellite-based altimetric data taken by GOES-3, SEASAT, and GEOSAT over the Aral Sea, the Black Sea, and the Caspian Sea are analyzed and a least squares collocation technique is used to predict the geoid undulations on a 0.25x0.25 deg. grid and to transform these geoid undulations to free air gravity anomalies. Rapp's 180x180 geopotential model is used as the reference surface for the collocation procedure. The result of geoid to gravity transformation is, however, sensitive to the information content of the reference geopotential model used. For example, considerable detailed surface gravity data were incorporated into the reference model over the Black Sea, resulting in a reference model with significant information content at short wavelengths. Thus, estimation of short wavelength gravity anomalies from gridded geoid heights is generally reliable over regions such as the Black Sea, using the conventional collocation technique with local empirical covariance functions. Over regions such as the Caspian Sea, where detailed surface data are generally not incorporated into the reference model, unconventional techniques are needed to obtain reliable gravity anomalies. Based on the predicted gravity anomalies over these inland seas, speculative tectonic structures are identified and geophysical processes are inferred

User's guide: Programs for processing altimeter data over inland seas

The programs described were developed to process GEODYN-formatted satellite altimeter data, and to apply the processed results to predict geoid undulations and gravity anomalies of inland sea areas. These programs are written in standard FORTRAN 77 and are designed to run on the NSESCC IBM 3081(MVS) computer. Because of the experimental nature of these programs they are tailored to the geographical area analyzed. The attached program listings are customized for processing the altimeter data over the Black Sea. Users interested in the Caspian Sea data are expected to modify each program, although the required modifications are generally minor. Program control parameters are defined in the programs via PARAMETER statements and/or DATA statements. Other auxiliary parameters, such as labels, are hard-wired into the programs. Large data files are read in or written out through different input or output units. The program listings of these programs are accompanied by sample IBM job control language (JCL) images. Familiarity with IBM JCL and the TEMPLATE graphic package is assumed

Analysis of altimetry over inland seas

Satellite-based altimetric data taken by GEOS-3 and SEASAT over the Black Sea and Caspian Sea are analyzed and a least squares collocation technique is used to predict the geoid undulation on a .25-degree by .25-degree grid and to transform these geoid undulations to free air gravity anomalies. This project entailed processing satellite altimeter data over inland seas for recovery of area mean gravity information. Gravity information in this area of the world is not readily available, so the possibility of obtaining it from the processing of altimeter observations is attractive. The principal objective was to complete and extend analyses done in a previous study, verify those results, and document the results and techniques. A secondary objective was to improve the algorithms and results, if possible. The approach used involved editing geoid height data to remove overland data; evaluating geoid height differences at crossover points; removing orbit errors from geoid heights using crossover differences; gridding geoid height data at .25-degree by .25-degree intervals; and estimating the gravity anomalies from gridded geoid heights using the collocation technique

Analysis of altimetry over the Aral Sea

Satellite based altimetric data taken by GEOS-3, SEASAT, and GEOSAT over the Aral Sea are analyzed and a least squares collocation technique is used to predict the geoid undulations on a 0.25 by 0.25 degree grid and to transform these geoid undulations to free air gravity anomalies. Rapp's 180 by 180 geopotential model is taken as the empirical model. The collocation procedure is performed with a set of local residual empirical covariance functions. For comparison, Rapp's global covariance functions and Jordan's self-consistent theoretical covariance functions based on Jordan's formulation and on locally derived parameters are also used to grid geoid undulations and to predict gravity anomalies. The sensitivity of the collocation results to the choice of covariance functions is discussed

Ecosystem Approach to Small Scale Tropical Marine Fisheries

This is a 4-page brochure about a WorldFish led project. Throughout the world, poor fisheries management contributes to resource degradation, poverty, and food insecurity. This European Union project on an Ecosystem Approach to Small-scale Tropical Marine Fisheries is led by WorldFish and implemented in collaboration with national partners in Asia (Southeastern)-Indonesia; the Asia (Southeastern)-Philippines; the Solomon Islands and Tanzania. The overall objective is to use an ecosystem approach to fisheries management (EAFM) to improve governance of small-scale fisheries (SSF). The EAFM puts sustainability and equitability at the forefront of fisheries governance which enhances their contribution to poverty reduction.Specific objectives are to: 1. Assess existing institutional arrangements and identify opportunities for an EAFM to improve integrated SSF management; 2. Develop EAFM strategies and actions suitable for developing country contexts; 3. Strengthen the capacity of local fishery stakeholders and government agencies to collaborate and work within an EAFM. The project is taking a participatory and gender sensitive approach, both core philosophies of WorldFish. Representatives of all relevant stakeholder groups are involved in this action research project

A Magnetic Model of the Tetragonal-Orthorhombic Transition in the Cuprates

It is shown that a quasi two dimensional (layered) Heisenberg antiferromagnet with fully frustrated interplane couplings ({\it e.g.} on a body-centered tetragonal lattice) generically exhibits two thermal phase transitions with lowering temperature -- an upper transition at $T_{TO}$ (``order from disorder without order'') in which the lattice point-group symmetry is spontaneously broken, and a lower N\'{e}el transition at $T_{N}$ at which spin-rotation symmetry is broken. Although this is the same sequence of transitions observed in La$_2$CuO$_4$, in the Heisenberg model (without additional lattice degrees of freedom) $(T_{TO}-T_N) /T_N$ is much smaller than is observed. The model may apply to the bilayer cuprate La$_2$CaCuO$_6$, in which the transitions are nearly coincident.Comment: 10 pages, 4 figure

A bioprinted cardiac patch composed of cardiac-specific extracellular matrix and progenitor cells for heart repair

Congenital heart defects are present in 8 of 1000 newborns and palliative surgical therapy has increased survival. Despite improved outcomes, many children develop reduced cardiac function and heart failure requiring transplantation. Human cardiac progenitor cell (hCPC) therapy has potential to repair the pediatric myocardium through release of reparative factors, but therapy suffers from limited hCPC retention and functionality. Decellularized cardiac extracellular matrix hydrogel (cECM) improves heart function in animals, and human trials are ongoing. In the present study, a 3D-bioprinted patch containing cECM for delivery of pediatric hCPCs is developed. Cardiac patches are printed with bioinks composed of cECM, hCPCs, and gelatin methacrylate (GelMA). GelMA-cECM bioinks print uniformly with a homogeneous distribution of cECM and hCPCs. hCPCs maintain &gt;75% viability and incorporation of cECM within patches results in a 30-fold increase in cardiogenic gene expression of hCPCs compared to hCPCs grown in pure GelMA patches. Conditioned media from GelMA-cECM patches show increased angiogenic potential (&gt;2-fold) over GelMA alone, as seen by improved endothelial cell tube formation. Finally, patches are retained on rat hearts and show vascularization over 14 d in vivo. This work shows the successful bioprinting and implementation of cECM-hCPC patches for potential use in repairing damaged myocardium

Magnetisation distribution in the tetragonal phase of BaFe2As2

We have determined the spatial distribution of the magnetisation induced by a field of 9 T in the tetragonal phase of BaFe2As2 using polarised neutron diffraction. Magnetic structure factors derived from the polarisation dependence of the intensities of Bragg reflections were used to make a maximum entropy reconstruction of the distribution projected on the 110 plane. The reconstruction shows clearly that the magnetisation is confined to the region around the iron atoms and that there is no significant magnetisation associated with either the As or Ba atoms. The distribution of magnetisation around the Fe atom is significantly non-spherical with a shape which is extended in the directions in the projection. These results show that the electrons which give rise to the paramagnetic susceptibility are confined to the Fe atoms their distribution suggests that they occupy 3d t_2g type orbitals with about 60% in those of xy symmetry