Precision of In Vivo Quantitative Tooth Wear Measurement using Intra-Oral Scans

Quantitative wear measurement is of increasing interest for measuring tooth wear progression. However, most research on quantitative wear measurement has focused on simulated wear or scanned gypsum casts. A 3D Wear Analysis (3DWA) protocol has been developed that analyzes tooth wear in vivo through intra-oral scanners available to dental clinicians. This study investigated the precision of the 3DWA protocol for measuring wear through maximum height loss (mm) and volume change (mm3). Observational prospective wear data from 55 patients were analyzed after 0-1-, 0-3-, and 0-5-year intervals to determine rates of wear, and convenience samples were chosen to test the protocol's precision on dentitions scanned twice in one sitting and its intra- and inter-rater precision on scans with 0-3- and 0-5-year intervals. Scans were made using intra-oral scanners (IOS) and superimposed using 3D measurement software. T-tests were performed to determine the structural and random error, and trimmed ranges were calculated to interpret the error. For protocol precision, the mean difference was 0.015 mm (-0.002; 0.032, p = 0.076) for height and -0.111 mm3 (-0.250; 0.023, p = 0.101) for volume. The duplicate measurement error was 0.062 mm for height and 0.268 mm3 for volume. The height measurements were precise enough to measure wear after intervals of 0-3 or 0-5 years; however, volume measurements were susceptible to procedural error and operator sensitivity. The 3DWA protocol is precise enough to adequately measure tooth height loss after intervals of a minimum of 3 years or in patients with severe wear progression, but it is not suited to measuring volumetric changes

Gingival recessions and the change of inclination of mandibular incisors during orthodontic treatment

SUMMARY A recent systematic review demonstrated that, overall, orthodontic treatment might result in a small worsening of periodontal status. The aim of this retrospective study was to test the hypothesis that a change of mandibular incisor inclination promotes development of labial gingival recessions. One hundred and seventy-nine subjects who met the following inclusion criteria were selected: age 11-14 years at start of orthodontic treatment (TS), bonded retainer placed immediately after treatment (T0), dental casts and lateral cephalograms available pre-treatment (TS), post-treatment (T0), 2 years post-treatment (T2), and 5 years post-treatment (T5). Depending on the change of lower incisor inclination during treatment (ΔInc_Incl), the sample was divided into three groups: Retro (N = 34; ΔInc_Incl ≤ -1 degree), Stable (N = 22; ΔInc_Incl > -1 degree and ≤1 degree), and Pro (N = 123; ΔInc_Incl > 1 degree). Clinical crown heights of mandibular incisors and the presence of gingival recessions in this region were assessed on plaster models. Fisher's exact tests, one-way analysis of variance, and regression models were used for analysis of inter-group differences. The mean increase of clinical crown heights (T0 to T5) of mandibular incisors ranged from 0.6 to 0.91 mm in the Retro, Stable, and Pro groups, respectively; the difference was not significant (P = 0.534). At T5, gingival recessions were present in 8.8, 4.5, and 16.3 per cent patients from the Retro, Stable, and Pro groups, respectively. The difference was not significant (P = 0.265). The change of lower incisors inclination during treatment did not affect development of labial gingival recessions in this patient grou

Assessing caries status according to the CAST instrument and WHO criterion in epidemiological studies

ABSTRACT: Background: The Caries Assessment Spectrum and Treatment (CAST) is a new epidemiological instrument for detection and treatment of dental caries. Worldwide, the WHO criterion constitutes the epidemiological tool most commonly used for caries detection. The objective of the present study is to determine the levels of similarity and difference between the CAST instrument and WHO criterion on the basis of caries prevalence, dmf/DMF counts, examination time and reporting of results. Methods: An epidemiological survey was carried out in Brazil among 6-11-year-old schoolchildren. Time of examinations was recorded. dmft, dmfs, DMFT and DMFS counts and dental caries prevalence were obtained according to the WHO criterion and the CAST instrument, as well the correlation coefficient between the two instruments. Results: Four hundred nineteen children were examined. dmft and dmfs counts were 1.92 and 5.31 (CAST), 1.99 and 5.34 (WHO) with correlation coefficients (r) of 0.95 and 0.93, respectively. DMFT and DMFS counts were 0.20 and 0.33 (CAST), 0.19 and 0.30 (WHO), with r = 0.78 and r=0.72, respectively. Kappa coefficient values for intra-examiner consistency were CAST = 0.91-0.92; WHO = 0.95-0.96 and those for inter-examiner consistency were CAST = 0.90-0.96; WHO = 0.94-1.00. Mean time spent on applying CAST and WHO were 66.3 and 64.7 sec, respectively p = 0.26. The prevalence of dental caries using CAST (codes 2, 5-8) and the WHO criterion for the primary dentition were 63.0% and 65.9%, respectively, and for the permanent dentition they were 12.7% and 12.8%, respectively. Conclusions: The CAST instrument provided similar prevalence of dental caries values and dmf/DMF counts as the WHO criterion in this age group. Time spent on examining children was identical for both caries assessment methods. Presentation of results from use of the CAST instrument, in comparison to WHO criterion, allowed a more detailed reporting of stages of dental caries, which will be useful for oral health planners

Dental Status and Associated Factors in a Dentate Adult Population in Bulgaria: A Cross-Sectional Survey

This study aimed to determine variations in the dental status of a dentate adult population in terms of “decayed,” “missing,” and “filled” teeth in relation to several sociodemographic and behavioral factors. Quota sampling was used to draw 2531 subjects aged 20 years and over. Data were collected by means of a questionnaire and an oral examination. Multiple logistic regression analyses were performed to observe associations between “decayed,” “missing,” and “filled” teeth and the factors of interest. The mean numbers of “decayed,” “missing,” and “filled” teeth were 2.2, 6.7, and 4.9, respectively. Molar teeth were significantly more often “missing” than premolar and anterior teeth. Age, gender, education, and tooth brushing revealed most noticeable associations. Increasing age was associated with a lower chance of having “decayed” and “filled” teeth, but with a higher chance of having “missing” teeth. Females were more likely to have “missing” and “filled” teeth. Higher education was associated with a lower chance of having “missing” teeth. More frequent tooth brushing was associated with a lower chance of having “decayed” and “missing” teeth, but with a higher chance of having “filled” teeth. These risk indicators should be considered in prevention program planning if reduction of tooth loss is to be achieved

Improvement of quality of life with implant-supported mandibular overdentures and the effect of implant type and surgical procedure on bone and soft tissue stability : a three-year prospective split-mouth trial

In fully edentulous patients, the support of a lower dental prosthesis by two implants could improve the chewing ability, retention, and stability of the prosthesis. Despite high success rates of dental implants, complications, such as peri-implantitis, do occur. The latter is a consequence of crestal bone loss and might be related to the implant surface and peri-implant soft tissue thickness. The aim of this paper is to describe the effect of implant surface roughness and soft tissue thickness on crestal bone remodeling, peri-implant health, and patient-centered outcomes. The mandibular overdenture supported by two implants is used as a split-mouth model to scrutinize these aims. The first study compared implants placed equicrestal to implants placed biologically (i.e., dependent on site-specific soft tissue thickness). The second clinical trial compared implants with a minimally to a moderately rough implant neck. Both studies reported an improvement in oral health-related quality of life and a stable peri-implant health after three years follow-up. Only equicrestal implant placement yielded significantly higher implant surface exposure, due to the establishment of the biologic width. Within the limitations of this study, it can be concluded that an implant supported mandibular overdenture significantly improves the quality of life, with limited biologic complications and high survival rates of the implants

The long-term effect of adapting the vertical position of implants on peri-implant health : a 5-year intra-subject comparison in the edentulous mandible including oral health-related quality of life

Despite high success rates of dental implants, surface exposure may occur as a consequence of biologic width establishment associated with surgery. This prospective split-mouth study evaluated the effect of early implant surface exposure caused by initial bone remodeling on long-term peri-implant bone stability and peri-implant health. Additionally, Oral Health-Related Quality of Life (OHRQoL) was assessed by means of the Oral Health Impact Profile-14 (OHIP-14). Twenty-six patients received two non-splinted implants supporting an overdenture in the mandible by means of locators. One implant was installed equicrestally (control) and the second one was installed subcrestally, taking at least 3 mm soft tissue thickness into account (test). During initial bone remodeling (up to 6 months postoperatively), equicrestal placement yielded 0.68 mm additional surface exposure compared to subcrestal placement (p < 0.001). Afterwards, bone level and peri-implant health were comparable in both treatment conditions and stable up to 5 years. The implant overdenture improved OHRQoL (p < 0.01) and remained unchanged thereafter (p = 0.51). In conclusion, adapting the vertical position of the implant concerning the soft tissue thickness prevents early implant surface exposure caused by initial bone remodeling, but in a well-maintained population, this has no impact on long-term prognosis. The treatment of edentulousness with an implant mandibular overdenture improves OHRQoL

Tooth loss and oral health-related quality of life: a systematic review and meta-analysis

Contains fulltext : 87677.pdf (publisher's version ) (Open Access)BACKGROUND: It is increasingly recognized that the impact of disease on quality of life should be taken into account when assessing health status. It is likely that tooth loss, in most cases being a consequence of oral diseases, affects Oral Health-Related Quality of Life (OHRQoL). The aim of the present study is to systematically review the literature and to analyse the relationship between the number and location of missing teeth and oral health-related quality of life (OHRQoL). It was hypothesized that tooth loss is associated with an impairment of OHRQoL. Secondly, it was hypothesized that location and distribution of remaining teeth play an important role in this. METHODS: Relevant databases were searched for papers in English, published from 1990 to July 2009 following a broad search strategy. Relevant papers were selected by two independent readers using predefined exclusion criteria, firstly on the basis of abstracts, secondly by assessing full-text papers. Selected studies were grouped on the basis of OHRQoL instruments used and assessed for feasibility for quantitative synthesis. Comparable outcomes were subjected to meta-analysis; remaining outcomes were subjected to a qualitative synthesis only. RESULTS: From a total of 924 references, 35 were eligible for synthesis (inter-reader agreement abstracts kappa = 0.84 +/- 0.03; full-texts: kappa = 0.68 +/- 0.06). Meta-analysis was feasible for 10 studies reporting on 13 different samples, resulting in 6 separate analyses. All studies showed that tooth loss is associated with unfavourable OHRQoL scores, independent of study location and OHRQoL instrument used. Qualitative synthesis showed that all 9 studies investigating a possible relationship between number of occluding pairs of teeth present and OHRQoL reported significant positive correlations. Five studies presented separate data regarding OHRQoL and location of tooth loss (anterior tooth loss vs. posterior tooth loss). Four of these reported highest impact for anterior tooth loss; one study indicated a similar impact for both locations of tooth loss. CONCLUSIONS: This study provides fairly strong evidence that tooth loss is associated with impairment of OHRQoL and location and distribution of tooth loss affect the severity of the impairment. This association seems to be independent from the OHRQoL instrument used and context of the included samples

Does initial buccal crest thickness affect final buccal crest thickness after flapless immediate implant placement and provisionalization:A prospective cone beam computed tomogram cohort study

BACKGROUND: Flapless immediate implant placement and provisionalization (FIIPP) in the aesthetic zone is still controversial. Especially, an initial buccal crest thickness (BCT) of ≤1 mm is thought to be disruptive for the final buccal crest stability jeopardizing the aesthetic outcome. PURPOSE: To radiographically assess the BCT and buccal crest height (BCH) after 1 year and to calculate the correlation between initial and final achieved BCT. MATERIALS AND METHODS: The study was designed as a prospective study on FIIPP. Only patients were included in whom one maxillary incisor was considered as lost. In six centers, 100 consecutive patients received FIIPP. Implants were placed in a maximal palatal position of the socket, thereby creating a buccal space of at least 2 mm, which was subsequently filled with a bovine bone substitute. Files of preoperative (T0), peroperative (T1) and 1-year postoperative (T3) cone beam computed tomogram (CBCT) scans were imported into the Maxillim™ software to analyze the changes in BCT-BCH over time. RESULTS: Preoperatively, 85% of the cases showed a BCT ≤1 mm, in 25% of the patients also a small buccal defect (≤5 mm) was present. Mean BCT at the level of the implant-shoulder increased from 0.6 mm at baseline to 3.3 mm immediate postoperatively and compacted to 2.4 mm after 1 year. Mean BCH improved from 0.7 to 3.1 mm peroperatively, and resorbed to 1.7 mm after 1 year. The Pearson correlation of 0.38 between initial and final BCT was significant (p = 0.01) and therefore is valued as moderate. If only patients (75%) with an intact alveolus were included in the analysis, still a "moderate correlation" of 0.32 (p = 0.01) was calculated. CONCLUSIONS: A "moderate correlation" was shown for the hypothesis that "thinner preoperative BCT's deliver thinner BCT's" 1 year after performing FIIPP

Effect of antibiotic pack on hard palate after fistula closure on nasal airflow and reoccurrence rate

This parallel blocked randomized controlled trial was done in two groups of 30 patients each to determine if placement of an antibiotic oral pack on the hard palate after hard palatal fistula repair reduces nasal air emission and fistula re-occurrence. Group A had an oral pack on the hard palate for 5 days post-operatively while group B did not. In group A, percentage of nasal air emission was tested using nasometry with and without pack. Paired t-tests were performed to compare nasal emissions for patients with and without pack. Recurrence of fistulas after 6 months between group A and B was tested using odds ratio. Effect of nasal air emission on fistula rates was tested using paired t-tests. There was a significant increase (p < 0.0001) in nasal emission after removal of the pack in group A. Fistula re-occurrence tended to be higher in group B (no pack) than group A but this was not significant (p = 0.242). There was no correlation between nasal air emission and fistula rates. In patients with recurrent fistulae, placement of an oral pack after fistula repair diminishes nasal air emission. Whether this has an impact on re-occurrence of fistulae needs to be investigated further

The Prediction Accuracy of Digital Orthodontic Setups for the Orthodontic Phase before Orthognathic Surgery.

The purpose of this study was to verify whether pre-treatment digital setups can accurately predict the tooth positions after presurgical orthodontic treatment has been performed in a 3-dimensional way. Twenty-six patients who underwent a combined orthodontic-orthognathic surgical treatment were included. Pre-treatment digital dental models were merged with cone beam computed tomography (CBCT) scans. One operator fabricated virtual setups to simulate the tooth movements of the presurgical orthodontic treatment. Prior to surgery, digital dental models were merged with the CBCT scans. Differences between de virtual setups and the presurgical dental models were calculated using linear mixed model analyses. Differences in tooth displacements exceeding the boundaries of clinical acceptance (&gt;2 degrees for rotations and &gt;0.6 mm for translations) were found in 75% of the rotational and 52% of translational mean differences in the maxilla and in 74% of the rotational mean differences and 44% of the translational mean differences in the mandible. Significant differences were found for all tooth types and in all tooth displacement directions with significant effects of extractions and surgically assisted rapid maxillary expansion (SARME) procedures. The accuracy of the digital setup is still too limited to correctly simulate the presurgical orthodontic treatment