323 research outputs found

    Alternative shear reinforcement for reinforced concrete flat slabs

    Get PDF
    This paper presents the first series of validation tests for a patented shear reinforcement system for reinforced concrete flat slabs. The system, called “Shearband,” consists of elongated thin steel strips punched with holes, which undulate into the slab from the top surface. The main advantages of the new reinforcement system are structural effectiveness, flexibility, simplicity, and speed of construction. Four reinforced concrete slabs were tested in a specially designed test rig. The slabs reinforced in shear exhibited ductile behavior after achieving their full flexural potential, thus proving the effectiveness of the new reinforcement. This paper reviews briefly existing types of shear reinforcement and identifies the need for more efficient and economic solutions. Details of the experimental setup and results are given, including strain and deflection measurements as well as photographs of sections through the slabs. Finally, comparisons are made with the ACI 318 and BS8110 code predictions, which confirm that the system enabled the slabs to avoid punching shear failure and achieve their flexural potential. In addition, both codes are shown to lead to conservative estimates of flexural and punching shear capacities of reinforced concrete slabs

    Biogeography of key mesozooplankton species in the North Atlantic and egg production of Calanus finmarchicus

    Get PDF
    Here we present a new, pan-North-Atlantic compilation of data on key mesozooplankton species, including the most important copepod, Calanus finmarchicus. Distributional data of eight representative zooplankton taxa, from recent (2000–2009) Continuous Plankton Recorder data, are presented, along with basin-scale data of the phytoplankton colour index. Then we present a compilation of data on C. finmarchicus, including observations of abundance, demography, egg production and female size, with accompanying data on temperature and chlorophyll. This is a contribution by Canadian, European and US scientists and their institutions: http://doi.pangaea.de/10.1594/PANGAEA.820732, http://doi.pangaea.de/10.1594/PANGAEA.824423, http://doi.pangaea.de/10.1594/PANGAEA.828393 (please also see Melle et al., 2013; Castellani and Licandro, 2013; Jónasdóttir et al., 2014)

    Antipsychotic drug use in pregnancy: A multinational study from ten countries

    Get PDF
    Aim: To compare the prevalence and trends of antipsychotic drug use during pregnancy between countries across four continents. Methods: Individually linked health data in Denmark (2000−2012), Finland (2005–2014), Iceland (2004–2017), Norway (2005–2015), Sweden (2006–2015), Germany (2006–2015), Australia (New South Wales, 2004–2012), Hong Kong (2001–2015), UK (2006–2016), and the US (Medicaid, 2000–2013, and IBM MarketScan, 2012–2015) were used. Using a uniformed approach, we estimated the prevalence of antipsychotic use as the proportion of pregnancies where a woman filled at least one antipsychotic prescription within three months before pregnancy until birth. For the Nordic countries, data were meta-analyzed to investigate maternal characteristics associated with the use of antipsychotics. Results: We included 8,394,343 pregnancies. Typical antipsychotic use was highest in the UK (4.4%) whereas atypical antipsychotic use was highest in the US Medicaid (1.5%). Atypical antipsychotic use increased over time in most populations, reaching 2% in Australia (2012) and US Medicaid (2013). In most countries, prochlorperazine was the most commonly used typical antipsychotic and quetiapine the most commonly used atypical antipsychotic. Use of antipsychotics decreased across the trimesters of pregnancy in all populations except Finland. Antipsychotic use was elevated among smokers and those with parity ≥4 in the Nordic countries. Conclusion: Antipsychotic use during pregnancy varied considerably between populations, partly explained by varying use of the typical antipsychotic prochlorperazine, which is often used for nausea and vomiting in early pregnancy. Increasing usage of atypical antipsychotics among pregnant women reflects the pattern that was previously reported for the general population

    Micromechanical modeling of tension stiffening in FRP-strengthened concrete elements

    Get PDF
    This article presents a micromodeling computational framework for simulating the tensile response and tension-stiffening behavior of fiber reinforced polymer–strengthened reinforced concrete elements. The total response of strengthened elements is computed based on the local stress transfer mechanisms at the crack plane including concrete bridging stress, reinforcing bars stress, FRP stress, and the bond stresses at the bars-to-concrete and fiber reinforced polymer-to-concrete interfaces. The developed model provides the possibility of calculating the average response of fiber reinforced polymer, reinforcing bars, and concrete as well as the crack spacing and crack widths. The model, after validation with experimental results, is used for a systematic parameter study and development of micromechanics-based relations for calculating the crack spacing, fiber reinforced polymer critical ratio, debonding strength, and effective bond length. Constitutive models are also proposed for concrete tension stiffening and average response of steel reinforcing bars in fiber reinforced polymer–strengthened members as the main inputs of smeared crack modeling approaches

    A boundary element analysis on the influence of Krc and e/d on the performance of cyclically loaded single pile in clay

    Get PDF
    The environment prevalent in oceans necessitates the piles supporting offshore structures to be designed against lateral cyclic loading initiated by wave action. Such quasi-static load reversal induces deterioration in the strength and stiffness of the soil-pile system, introducing progressive reduction in the bearing capacity associated with increased settlement of the pile foundation. To understand the effect of lateral cyclic load on axial response of single piles in soft clay, a numerical model was previously developed and validated by the author. Using the methodology, further analysis has been carried out to investigate how the variation in relative pilesoil stiffness and eccentricity effects the degradation of axial pile capacity due to the effect of lateral cyclic load. This paper presents a brief description of the methodology, analysis and interpretations of the theoretical results obtained from the further analysis and the relevant conclusions drawn there from

    Comparison of Statistical Population Reconstruction Using Full and Pooled Adult Age-Class Data

    Get PDF
    BACKGROUND: Age-at-harvest data are among the most commonly collected, yet neglected, demographic data gathered by wildlife agencies. Statistical population construction techniques can use this information to estimate the abundance of wild populations over wide geographic areas and concurrently estimate recruitment, harvest, and natural survival rates. Although current reconstruction techniques use full age-class data (0.5, 1.5, 2.5, 3.5, … years), it is not always possible to determine an animal's age due to inaccuracy of the methods, expense, and logistics of sample collection. The ability to inventory wild populations would be greatly expanded if pooled adult age-class data (e.g., 0.5, 1.5, 2.5+ years) could be successfully used in statistical population reconstruction. METHODOLOGY/PRINCIPAL FINDINGS: We investigated the performance of statistical population reconstruction models developed to analyze full age-class and pooled adult age-class data. We performed Monte Carlo simulations using a stochastic version of a Leslie matrix model, which generated data over a wide range of abundance levels, harvest rates, and natural survival probabilities, representing medium-to-big game species. Results of full age-class and pooled adult age-class population reconstructions were compared for accuracy and precision. No discernible difference in accuracy was detected, but precision was slightly reduced when using the pooled adult age-class reconstruction. On average, the coefficient of variation (i.e., SE(θ)/θ) increased by 0.059 when the adult age-class data were pooled prior to analyses. The analyses and maximum likelihood model for pooled adult age-class reconstruction are illustrated for a black-tailed deer (Odocoileus hemionus) population in Washington State. CONCLUSIONS/SIGNIFICANCE: Inventorying wild populations is one of the greatest challenges of wildlife agencies. These new statistical population reconstruction models should expand the demographic capabilities of wildlife agencies that have already collected pooled adult age-class data or are seeking a cost-effective method for monitoring the status and trends of our wild resources
    corecore