Nonlinear MHD waves in a Prominence Foot

We study nonlinear waves in a prominence foot using 2.5D MHD model motivated by recent high-resolution observations with Hinode/SOT in Ca~II emission of a prominence on October 10, 2012 showing highly dynamic small-scale motions in the prominence material. Observations of H$\alpha$ intensities and of Doppler shifts show similar propagating fluctuations. However the optically thick nature of the emission lines inhibits unique quantitative interpretation in terms of density. Nevertheless, we find evidence of nonlinear wave activity in the prominence foot by examining the relative magnitude of the fluctuation intensity ($\delta I/I\sim \delta n/n$). The waves are evident as significant density fluctuations that vary with height, and apparently travel upward from the chromosphere into the prominence material with quasi-periodic fluctuations with typical period in the range of 5-11 minutes, and wavelengths $\sim <$2000 km. Recent Doppler shift observations show the transverse displacement of the propagating waves. The magnetic field was measured with THEMIS instrument and was found to be 5-14 G. For the typical prominence density the corresponding fast magnetosonic speed is $\sim$20 km s$^{-1}$, in qualitative agreement with the propagation speed of the detected waves. The 2.5D MHD numerical model is constrained with the typical parameters of the prominence waves seen in observations. Our numerical results reproduce the nonlinear fast magnetosonic waves and provide strong support for the presence of these waves in the prominence foot. We also explore gravitational MHD oscillations of the heavy prominence foot material supported by dipped magnetic field structure

A multi-spacecraft view of a giant filament eruption during 26/27 September 2009

We analyze multi-spacecraft observations of a giant filament eruption that occurred during 26 and 27 September 2009. The filament eruption was associated with a relatively slow coronal mass ejection (CME). The filament consisted of a large and a small part, both parts erupted nearly simultaneously. Here we focus on the eruption associated with the larger part of the filament. The STEREO satellites were separated by about 117 degree during this event, so we additionally used SoHO/EIT and CORONAS/TESIS observations as a third eye (Earth view) to aid our measurements. We measure the plane-of-sky trajectory of the filament as seen from STEREO-A and TESIS view-points. Using a simple trigonometric relation, we then use these measurements to estimate the true direction of propagation of the filament which allows us to derive the true R=R_sun v/s time profile of the filament apex. Furthermore, we develop a new tomographic method that can potentially provide a more robust three-dimensional reconstruction by exploiting multiple simultaneous views. We apply this method also to investigate the 3D evolution of the top part of filament. We expect this method to be useful when SDO and STEREO observations are combined. We then analyze the kinematics of the eruptive filament during its rapid acceleration phase by fitting different functional forms to the height-time data derived from the two methods. We find that, for both methods, an exponential function fits the rise profile of the filament slightly better than parabolic or cubic functions. Finally, we confront these results with the predictions of theoretical eruption models.Comment: 16 pages, 9 figures, to appear in Astrophysical Journa

Chain Reconnections observed in Sympathetic Eruptions

The nature of various plausible causal links between sympathetic events is still a controversial issue. In this work, we present multi-wavelength observations of sympathetic eruptions, associated flares and coronal mass ejections (CMEs) occurring on 2013 November 17 in two close-by active regions. Two filaments i.e., F1 and F2 are observed in between the active regions. Successive magnetic reconnections, caused by different reasons (flux cancellation, shear and expansion) have been identified during the whole event. The first reconnection occurred during the first eruption via flux cancellation between the sheared arcades overlying filament F2, creating a flux rope and leading to the first double ribbon solar flare. During this phase we observed the eruption of overlaying arcades and coronal loops, which leads to the first CME. The second reconnection is believed to occur between the expanding flux rope of F2 and the overlying arcades of the filament F1. We suggest that this reconnection destabilized the equilibrium of filament F1, which further facilitated its eruption. The third stage of reconnection occurred in the wake of the erupting filament F1 between the legs of overlying arcades. This may create a flux rope and the second double ribbon flare and a second CME. The fourth reconnection was between the expanding arcades of the erupting filament F1 and the nearby ambient field, which produced the bi-directional plasma flows towards both upward and downward. Observations and a nonlinear force-free field extrapolation confirm the possibility of reconnection and the causal link between the magnetic systems.Comment: 37 pages, 17 figures, Accepted for publication in Ap

Thermal stability analysis of the fine structure of solar prominences

The linear thermal stability of a 2D periodic structure (alternatively hot and cold) in a uniform magnetic field is analyzed. The energy equation includes wave heating (assumed proportional to density), radiative cooling and both conduction parallel and orthogonal to magnetic lines. The equilibrium is perturbed at constant gas pressure. With parallel conduction only, it is found to be unstable when the length scale 1// is greater than 45 Mn. In that case, orthogonal conduction becomes important and stabilizes the structure when the length scale is smaller than 5 km. On the other hand, when the length scale is greater than 5 km, the thermal equilibrium is unstable, and the corresponding time scale is about 10,000 s: this result may be compared to observations showing that the lifetime of the fine structure of solar prominences is about one hour; consequently, our computations suggest that the size of the unresolved threads could be of the order of 10 km only

Temporal Evolution of the Magnetic Topology of the NOAA Active Region 11158

We studied the temporal evolution of the magnetic topology of the active region (AR) 11158 based on the reconstructed three-dimensional magnetic fields in the corona. The \nlfff\ extrapolation method was applied to the 12 minutes cadence data obtained with the \hmi\ (HMI) onboard the \sdo\ (SDO) during five days. By calculating the squashing degree factor Q in the volume, the derived quasi-separatrix layers (QSLs) show that this AR has an overall topology, resulting from a magnetic quadrupole, including an hyperbolic flux tube (HFT) configuration which is relatively stable at the time scale of the flare ($\sim 1-2$ hours). A strong QSL, which corresponds to some highly sheared arcades that might be related to the formation of a flux rope, is prominent just before the M6.6 and X2.2 flares, respectively. These facts indicate the close relationship between the strong QSL and the high flare productivity of AR 11158. In addition, with a close inspection of the topology, we found a small-scale HFT which has an inverse tear-drop structure above the aforementioned QSL before the X2.2 flare. It indicates the existence of magnetic flux rope at this place. Even though a global configuration (HFT) is recognized in this AR, it turns out that the large-scale HFT only plays a secondary role during the eruption. In final, we dismiss a trigger based on the breakout model and highlight the central role of the flux rope in the related eruption.Comment: Accepted by Ap

Hooked flare ribbons and flux-rope related QSL footprints

We studied the magnetic topology of active region 12158 on 2014 September 10 and compared it with the observations before and early in the flare which begins at 17:21 UT (SOL2014-09-10T17:45:00). Our results show that the sigmoidal structure and flare ribbons of this active region observed by SDO/AIA can be well reproduced from a Grad-Rubin non linear force free field extrapolation method. Various inverse-S and -J shaped magnetic field lines, that surround a coronal flux rope, coincide with the sigmoid as observed in different extreme ultraviolet wavelengths, including its multi-threaded curved ends. Also, the observed distribution of surface currents in the magnetic polarity where it was not prescribed is well reproduced. This validates our numerical implementation and set-up of the Grad-Rubin method. The modeled double inverse-J shaped Quasi-Separatrix Layer (QSL) footprints match the observed flare ribbons during the rising phase of the flare, including their hooked parts. The spiral-like shape of the latter may be related to a complex pre-eruptive flux rope with more than one turn of twist, as obtained in the model. These ribbon-associated flux-rope QSL-footprints are consistent with the new standard flare model in 3D, with the presence of a hyperbolic flux tube located below an inverse tear drop shaped coronal QSL. This is a new step forward forecasting the locations of reconnection and ribbons in solar flares, and the geometrical properties of eruptive flux ropes.Comment: Accepted for publication in Ap

Interaction of Two Filament Channels of Different Chiralities

We present observations of interactions between the two filament channels of different chiralities and associated dynamics that occurred during 2014 April 18 -- 20. While two flux ropes of different helicity with parallel axial magnetic fields can only undergo a bounce interaction when they are brought together, the observations at the first glance show that the heated plasma is moving from one filament channel to the other. The SDO/AIA 171 A observations and the PFSS magnetic field extrapolation reveal the presence of fan-spine magnetic configuration over the filament channels with a null point located above them. Three different events of filament activations, partial eruptions, and associated filament channel interactions have been observed. The activation initiated in one filament channel seems to propagate along the neighbour filament channel. We believe that the activation and partial eruption of the filaments bring the field lines of flux ropes containing them closer to the null point and trigger the magnetic reconnection between them and the fan-spine magnetic configuration. As a result, the hot plasma moves along the outer spine line toward the remote point. Utilizing the present observations, for the first time we have discussed how two different-chirality filament channels can interact and show interrelation.Comment: 30 pages, 13 figures, Accepted for Publication in Ap

Simulation of a Solar Jet Formed from an Untwisting Flux Rope Interacting with a Null Point

Coronal jets are eruptions identified by a collimated, sometimes twisted spire. They are small-scale energetic events compared with flares. Using multi-wavelength observations from the Solar Dynamics Observatory/Atmospheric Imaging Assembly (SDO/AIA) and a magnetogram from Hinode/Spectro-Polarimeter (Hinode/SP), we study the formation and evolution of a jet occurring on 2019 March 22 in the active region NOAA 12736. A zero-$\beta$ magnetohydrodynamic (MHD) simulation is conducted to probe the initiation mechanisms and appearance of helical motion during this jet event. As the simulation reveals, there are two pairs of field lines at the jet base, indicating two distinct magnetic structures. One structure outlines a flux rope lying low above the photosphere in the north of a bald patch region and the other structure shows a null point high in the corona in the south. The untwisting motions of the observed flux rope was recovered by adding an anomalous (artificial) resistivity in the simulation. A reconnection occurs at the bald patch in the flux rope structure, which is moving upwards and simultaneously encounters the field lines of the null point structure. The interaction of the two structures results in the jet while the twist of the flux rope is transferred to the jet by the reconnected field lines. The rotational motion of the flux rope is proposed to be an underlying trigger of this process and responsible for helical motions in the jet spire.Comment: 17pages, 9 figures. Accepted for publication in The Astrophysical Journa

Modelling and observations : a comparison of the magnetic field properties in a prominence

Funding: UK STFC, ERC, and Leverhulme Trust (DHM).Context. Direct magnetic field measurements in solar prominences occur infrequently and are difficult to make and interpret. As a consequence, alternative methods are needed to derive the main properties of the magnetic field that supports the prominence mass. This is important for our understanding of solar prominences, but also for understanding how eruptive prominences may affect space weather. Aims. We present the first direct comparison of the magnetic field strength derived from spectro-polarimetric observations of a solar prominence, with corresponding results from a theoretical flux rope model constructed from on-disc normal component magnetograms. Methods. We first used spectro-polarimetric observations of a prominence obtained with the magnetograph THEMIS operating in the Canary Islands to derive the magnetic field of the observed prominence by inverting the Stokes parameters measured in the He D3 line. Next, we constructed two data-constrained non-linear force-free field (NLFFF) models of the same prominence. In one model we assumed a strongly twisted flux rope solution, and in the other a weakly twisted flux rope solution. Results. The physical extent of the prominence at the limb (height and length) is best reproduced with the strongly twisted flux rope solution. The line-of-sight average of the magnetic field for the strongly twisted solution results in a magnetic field that has a magnitude of within a factor of 1−2 of the observed magnetic field strength. For the peak field strength along the line of sight, an agreement to within 20% of the observations is obtained for the strongly twisted solution. The weakly twisted solution produces significantly lower magnetic field strengths and gives a poor agreement with the observations. Conclusions. The results of this first comparison are promising. We found that the flux rope insertion method of producing a NLFFF is able to deduce the overall properties of the magnetic field in an observed prominence.Publisher PDFPeer reviewe