Analysis of Electrical Coupling Parameters in Superconducting Cables

The analysis of current distribution and redistribution in superconducting cables requires the knowledge of the electric coupling among strands, and in particular the interstrand resistance and inductance values. In practice both parameters can have wide variations in cables commonly used such as Rutherford cables for accelerators or Cable-in-Conduits for fusion and SMES magnets. In this paper we describe a model of a multi-stage twisted cable with arbitrary geometry that can be used to study the range of interstrand resistances and inductances that is associated with variations of geometry. These variations can be due to cabling or compaction effects. To describe the variations from the nominal geometry we have adopted a cable model that resembles to the physical process of cabling and compaction. The inductance calculation part of the model is validated by comparison to semi-analytical results, showing excellent accuracy and execution speed

A General Model for Thermal, Hydraulic and Electric Analysis of Superconducting Cables

In this paper we describe a generic, multi-component and multi-channel model for the analysis of superconducting cables. The aim of the model is to treat in a general and consistent manner simultaneous thermal, electric and hydraulic transients in cables. The model is devised for most general situations, but reduces in limiting cases to most common approximations without loss of efficiency. We discuss here the governing equations, and we write them in a matrix form that is well adapted to numerical treatment. We finally demonstrate the model capability by comparison with published experimental data on current distribution in a two-strand cable

Between Constraints and Coercion. Marriage and Social Reproduction in Northern and Central Italy, 18th-19th Centuries

In this paper we review the main theories of household and marriage systems, highlighting their inability to account for the astonishing variety of family and marriage patterns that characterized modern Italy. We propose a new interpretative framework, where social reproduction is given pride of place as the main factor shaping marital behavior and household formation in the past. We test our theory analyzing five populations in northern and central Italy, characterized by different ecological, economic, and social conditions. We use an event history analysis approach to model the timing of marriage in the populations under study. The results confirm that coercion mattered much more than Malthusian economic constraints. We conclude suggesting a more general application of our approach to the study of marital behavior, family formation, and residential patterns in the past

Fertility decline and the emergence of excess female survival in post-reproductive ages in Italy

In Italy, at least in the cohorts born up to the beginning of the twentieth century, women's mortality in post-reproductive ages was influenced by fertility, with large progenies (and, to a lesser extent, childlessness) leading to markedly lower survival chances. This relationship proved strong enough to affect the female-to-male ratio in old age as fertility declined. In this paper, we show that various measures of extra female survival at high ages are closely connected to the fertility transition in Italy, and to its peculiar historical and geographical evolution

Fatigue failure and success rate of lithium disilicate table-tops as a function of cement thickness

Purpose: Under thin, partial coverage restoration the proper cement thickness to be clinically employed still remains an issue. The aim of this study was to determine the failure and success rates of simplified lithium disilicate occlusal veneers as a function of cement thickness. The null hypothesis was that cement thickness has no effect on the fatigue resistance. Methods: Sound human molars were severed in a plane parallel to the occlusal surface to create a flat dentin surface surrounded by enamel edges. Forty-five occlusal veneers 1.0 mm thick (IPS e.max CAD LT) were luted to the teeth with Multilink Automix resin cement, creating 3 experimental groups (n=15) with cement thicknesses of 50, 100, and 200 µm. The restorations were fatigue-cycled using a ball mill machine containing zirconia and stainless steel spheres. Twelve 60 min cycles were performed. Survival statistics were applied to “failure” and “success” events, comparing the three groups using a log-rank Mantel– Cox test and a log-rank test for trends (alpha = 0.05). Results: The failure and success rates were not significantly influenced by cement thickness (P = 0.137 and P = 0.872, respectively); thus, the null hypothesis was accepted. However, when log-rank test for trends was applied to failure events, the tendency to have less failures with increasing thicknesses was found statistically significant (P = 0.047). Conclusions: The cement thickness within the range adopted here did not have a significant effect on the failure or success rate of lithium disilicate occlusal veneers when exposed to randomized impact stresses generating fatigue phenomena

Collagen degradation by host-derived enzymes during aging

Incompletely infiltrated collagen fibrils in acid-etched dentin are susceptible to degradation. We hypothesize that degradation can occur in the absence of bacteria. Partially demineralized collagen matrices (DCMs) prepared from human dentin were stored in artificial saliva. Control specimens were stored in artificial saliva containing proteolytic enzyme inhibitors, or pure mineral oil. We retrieved them at 24 hrs, 90 and 250 days to examine the extent of degradation of DCM. In the 24-hour experimental and 90- and 250-day control specimens, we observed 5- to 6-μm-thick layers of DCM containing banded collagen fibrils. DCMs were almost completely destroyed in the 250-day experimental specimens, but not when incubated with enzyme inhibitors or mineral oil. Functional enzyme analysis of dentin powder revealed low levels of collagenolytic activity that was inhibited by protease inhibitors or 0.2% chlorhexidine. We hypothesize that collagen degradation occurred over time, via host-derived matrix metalloproteinases that are released slowly over time.published_or_final_versio

Influence of the activation mode on long-term bond strength and endogenous enzymatic activity of dual-cure resin cements

Objective: To investigate the long-term microtensile bond strength (µTBS), interfacial nanoleakage expression (NL), and adhesive stability of dual-cure resin cements with/out light activation to dentin. Materials and methods: Composite overlays (N = 20) were luted to deep dentin surfaces with RelyX Ultimate (RXU, 3M) or Variolink EstheticDC (VAR, Ivoclar-Vivadent). A universal adhesive was used for bonding procedures (iBond universal, Heraeus Kulzer). The resin cements were either self-cured (SC; 1 h at 37 °C) or dual-cured (DC; 20s light-cure followed by 15 min self-cure at 37 °C). Specimens were submitted to µTBS immediately (T0) or after 1 year of laboratory storage (T12). The fracture pattern was evaluated using scanning electron microscopy (SEM). Data were statistically analyzed with two-way ANOVA/Tukey test. Further, the NL was quantified and analyzed (chi-square test) and in situ zymography was performed to evaluate the endogenous enzymatic activity within the hybrid layer (HL) at T0 and T12 (Mann–Whitney test). The significance level for all statistical tests was set at p = 0.05. Results: DC resulted in higher bond strength and decreased fluorescence at the adhesive interface, irrespective of the material and the storage period (p < 0.05). Significantly lower bonding performances (p < 0.05) and higher endogenous enzymatic activity (p < 0.05) were observed within the HL at T12 compared to T0 in all tested groups. Conclusions: Light-curing the dual-cure resin cements, more than the cement materials, accounted for good bonding performances and higher HL stability over time when used with a universal adhesive. Clinical significance The curing condition influences the bonding performances of dual-cure resin cements to dentin when used with a universal adhesive

Understanding olive oil stability using filtration and high hydrostatic pressure

Veiled extra virgin olive oil (VEVOO) is very attractive on the global market. A study was performed to highlight the role of different amounts of water and microorganisms on the evolution of VEVOO quality during storage, using the selective effects of the application of individual or combined filtration and high hydrostatic pressure (HHP) treatments. Four oil processing trials were carried out in four replicates, resulting in a full factorial design with two independent fixed factors: filtration and HPP treatments. The turbidity of all the olive oil samples was characterized. Furthermore, all the olive oil samples were analysed for legal parameters, volatile organic compounds and phenolic compounds during the storage tests. The microbial contamination in the presence of a high level of water activity (>0.6 Aw) was related to the formation of volatile aroma compounds, which were responsible for the \u201cfusty\u201d sensory defect. Furthermore, high water activity values were related to an increase in the hydrolytic degradation rate of the phenolic compounds. The oil turbidity has to be planned and controlled, starting from adjustment of the water content and application of good manufacturing practices