7,952 research outputs found
Capillary acquisition devices for high-performance vehicles: Executive summary
Technology areas critical to the development of cryogenic capillary devices were studied. Passive cooling of capillary devices was investigated with an analytical and experimental study of wicking flow. Capillary device refilling with settled fluid was studied using an analytical and experimental program that resulted in successful correlation of a versatile computer program with test data. The program was used to predict Centaur D-1S LO2 and LH2 start basket refilling. Comparisons were made between the baseline Centaur D-1S propellant feed system and feed system alternatives including systems using capillary devices. The preferred concepts from the Centaur D-1S study were examined for APOTV and POTV vehicles for delivery and round trip transfer of payloads between LEO and GEO. Mission profiles were determined to provide propellant usage timelines and the payload partials were defined
Child Well-being in the Pacific Rim
This study extends previous efforts to compare the well-being of children using multi-dimensional indicators derived from sample survey and administrative series to thirteen countries in the Pacific Rim. The framework for the analysis of child well-being is to organise 46 indicators into 21 components and organise the components into 6 domains: material situation, health, education, subjective well-being, living environment, as well as risk and safety. Overall, Japan, Singapore and Taiwan have the highest child well-being and Thailand, Indonesia and the Philippines the lowest. However, there are substantial variations between the domains. Japan and Korea perform best on the material well-being of children and also do well on health and education but they have the lowest subjective well-being among their children by some margin. There is a relationship between child well-being and GDP per capita but children in China have higher well-being than you would expect given their GDP and children in Australia have lower well-being. The analysis is constrained by missing data particularly that the Health Behaviour of School-Aged Children Survey is not undertaken in any of these countries
LSST optical beam simulator
We describe a camera beam simulator for the LSST which is capable of
illuminating a 60mm field at f/1.2 with realistic astronomical scenes, enabling
studies of CCD astrometric and photometric performance. The goal is to fully
simulate LSST observing, in order to characterize charge transport and other
features in the thick fully depleted CCDs and to probe low level systematics
under realistic conditions. The automated system simulates the centrally
obscured LSST beam and sky scenes, including the spectral shape of the night
sky. The doubly telecentric design uses a nearly unit magnification design
consisting of a spherical mirror, three BK7 lenses, and one beam-splitter
window. To achieve the relatively large field the beam-splitter window is used
twice. The motivation for this LSST beam test facility was driven by the need
to fully characterize a new generation of thick fully-depleted CCDs, and assess
their suitability for the broad range of science which is planned for LSST. Due
to the fast beam illumination and the thick silicon design [each pixel is 10
microns wide and over 100 microns deep] at long wavelengths there can be
effects of photon transport and charge transport in the high purity silicon.
The focal surface covers a field more than sufficient for a 40x40 mm LSST CCD.
Delivered optical quality meets design goals, with 50% energy within a 5 micron
circle. The tests of CCD performance are briefly described.Comment: 9 pages, 9 figure
Laser-controlled fluorescence in two-level systems
The ability to modify the character of fluorescent emission by a laser-controlled, optically nonlinear process has recently been shown theoretically feasible, and several possible applications have already been identified. In operation, a pulse of off-resonant probe laser beam, of sufficient intensity, is applied to a system exhibiting fluorescence, during the interval of excited- state decay following the initial excitation. The result is a rate of decay that can be controllably modified, the associated changes in fluorescence behavior affording new, chemically specific information. In this paper, a two-level emission model is employed in the further analysis of this all-optical process; the results should prove especially relevant to the analysis and imaging of physical systems employing fluorescent markers, these ranging from quantum dots to green fluorescence protein. Expressions are presented for the laser-controlled fluorescence anisotropy exhibited by samples in which the fluorophores are randomly oriented. It is also shown that, in systems with suitably configured electronic levels and symmetry properties, fluorescence emission can be produced from energy levels that would normally decay nonradiatively. © 2010 American Chemical Society
Nuclear fusion and renewable energy forms: Are they compatible?
Nuclear fusion can be considered as a base-load power plant technology: High investment costs and limited operational flexibility require continuous operation. Wind and solar, on the other hand, as the putative main pillars of a future renewable energy system, are intermittent power sources. The resulting variations that occur on many different time scales require at first sight a rather flexible back-up system to balance this stochastic behavior. Fusion would appear not to be well suited for this task. The situation changes, however, if a large-scale renewable energy system is envisaged based on a transnational, or even transcontinental power grid. The present paper discusses a possible European power system in the year 2050 and beyond. A high percentage share of renewable energies and a strong power grid spanning the whole of Europe and involving neighboring countries, in particular those in North Africa, are assumed. The linear programming model URBS is used to describe the power system. The model optimizes the overall system costs and simulates power plant operation with an hourly resolution for one whole year. The geographical resolution is at least at the country level. The renewable technologies are modeled first on a more local level and then summed together at the country or regional level. The results indicate that the smoothing effects of the large-scale power grid transform the intermittent renewable supply, which is then more compatible with base-load power plants such as fusion reactors
Optical vortex generation from molecular chromophore arrays
The generation of light endowed with orbital angular momentum, frequently termed optical vortex light, is commonly achieved by passing a conventional beam through suitably constructed optical elements. This Letter shows that the necessary phase structure for vortex propagation can be directly produced through the creation of twisted light from the vacuum. The mechanism is based on optical emission from a family of chromophore nanoarrays that satisfy specific geometric and symmetry constraints. Each such array can support pairs of electronically delocalized doubly degenerate excitons whose azimuthal phase progression is responsible for the helical wave front of the emitted radiation. The exciton symmetry dictates the maximum magnitude of topological charge; detailed analysis secures the conditions necessary to deliver optical vortices of arbitrary order
- …