Assessing the impacts of feedstock and process control on pyrolysis outputs for tyre recycling

Tyres are a problematic waste stream which are associated with low recycling rates; most are dumped or incinerated, offering poor value return from this material-rich and energy intensive waste. Pyrolysis offers the potential for ~30% of a tyre to be directly recyclable as ‘recovered carbon black’ (RCb), potentiating tyre-to-tyre recycling. However, most attempts to exploit the process have failed to produce consistent, high quality RCb on a commercially viable scale. Current consensus implies that RCb quality can only be improved by expensive post-processing, such as demineralisation using chemical solvents. Here it is shown that the quality (ash and volatile matter content) and consistency of RCb can be improved significantly by careful application of feedstock and process control during pyrolysis. This was achieved via the analysis of peer reviewed data from 31 waste tyres and yields from 161 runs in 37 pyrolysis reactors. A statistical bootstrapping regime showed that by selective exclusion of high ash tyres, and mixing the remainder thoroughly, RCb ash content could be reduced from 49% (upper 99% CI) to 14%. By utilising a unique reactor classification, it was found that fixed beds performed inconsistently, whilst rotary kilns and conical spouted beds produced high quality RCb and a high oil yield, even at lower pyrolysis temperatures. Due to their higher throughput, this work therefore suggests that application of rotary kilns with feedstock control are the best mechanisms to produce consistent high-quality products from pyrolysis, increasing the recyclability of automotive tyres

Internal and External Barriers to Effective Supply Chain Management Implementation in Malaysian Manufacturing Companies: A Priority List Based on Varying Demographic Perspectives

Successful implementation of supply-chain management in a developing country such as Malaysia is considered a major challenge due to lack of awareness and unclear missions and goals. Focusing on this idea, this article compares the ranking of various demographic groups in relation to the internal and external barriers experienced by Malaysian manufacturing companies. The identified lists of internal and external barriers are prioritised using the Analytic Hierarchy Process (AHP). Ten respondents with wide ranging experience in SCM provided the necessary information in the prioritisation exercise. The ranking of the respondents from different races, age groups, education levels, employment types, work experience and designations suggests significant variations between these groups in the ranking of the internal and external barriers. The findings of this research provide important information to company managers who desire to implement SCM in a multi-cultural setting such as Malaysia. The onus is on these managers to be cautious in developing a strategic plan for its effective implementation and also in designing programs to overcome SCM obstacles

Consecutive recovery of recovered carbon black and limonene from waste tyres by thermal pyrolysis in a rotary kiln

End of life tyres are one of the most abundant and least recycled waste streams. Material recovery processes that accommodate for the complexity and heterogeneity of waste tyres, such as pyrolysis, require urgent development. Examples of recycled tyre pyrolysis products include recovered carbon black (RCb), a recycled filler, and limonene, a solvent, although investigations reporting the recovery of both are limited. In this study the pyrolysis of waste tyres was investigated in a batch rotary kiln under varying conditions (temperature, gas flow, sample mass). Characterisation analysis was then applied to selected samples of RCb (BET surface area, transmissibility of toluene extract, proximate analysis) and tyre pyrolysis oil (yield, limonene content, FTIR). The best RCb (77.7 m2/g, 0.2% volatile matter, 17.0% ash, 94.8% transmissibility of toluene extract) was produced at 550 °C with a high ratio of purge gas flow (2000 mL/min) to rubber sample mass pyrolysed (100 g), minimising the recondensation of tarry volatiles on the RCb. The highest oil and limonene yield (38.4% and 17.4 g/kg waste tyres respectively) was produced at a temperature of 550 °C with a low ratio of purge gas (400 mL/min) to rubber sample pyrolysed (200 g), as these conditions prevented the decomposition of limonene to less valuable products and improved the oil trap condensation efficiency. These findings demonstrate the importance of pyrolysis processing conditions when considering the consecutive production of RCb and solvents from waste tyre pyrolysis, which shows significant future potential to valorise waste tyres, incentivising recycling

Co-Processed Excipients for Dispersible Tablets–Part 1: Manufacturability

Co-processed excipients may enhance functionality and reduce drawbacks of traditional excipients for the manufacture of tablets on a commercial scale. The following study aimed to characterise a range of co-processed excipients that may prove suitable for dispersible tablet formulations prepared by direct compression. Co-processed excipients were lubricated and compressed into 10.5-mm convex tablets using a Phoenix compaction simulator. Compression profiles were generated by varying the compression force applied to the formulation and the prepared tablets were characterised for hardness, friability, disintegration and fineness of dispersion. Our data indicates that CombiLac, F-Melt type C and SmartEx QD100 were the top 3 most suitable out of 16 co-processed excipients under the conditions evaluated. They exhibited good flow properties (Carr’s index ˂ 20), excellent tabletability (tensile strength > 3.0 MPa at 0.85 solid fraction), very low friability (< 1% after 15 min), rapid disintegration times (27–49 s) and produced dispersions of ideal fineness (< 250 μm). Other co-processed excipients (including F-Melt type M, Ludiflash, MicroceLac, Pharmaburst 500 and Avicel HFE-102) may be appropriate for dispersible tablets produced by direct compression providing the identified disintegration and dispersion risks were mitigated prior to commercialisation. This indicates that robust dispersible tablets which disintegrate rapidly could be manufactured from a range of co-processed excipients

Dialogue games for explaining medication choices

SMT solvers can be used efficiently to search for optimal paths across multiple graphs when optimising for certain resources. In the medical context, these graphs can represent treatment plans for chronic conditions where the optimal paths across all plans under consideration are the ones which minimize adverse drug interactions. The SMT solvers, however, work as a black-box model and there is a need to justify the optimal plans in a human-friendly way. We aim to fulfill this need by proposing explanatory dialogue protocols based on computational argumentation to increase the understanding and trust of humans interacting with the system. The protocols provide supporting reasons for nodes in a path and also allow counter reasons for the nodes not in the graph, highlighting any potential adverse interactions during the dialogue.Postprin

First report of generalized face processing difficulties in möbius sequence.

Reverse simulation models of facial expression recognition suggest that we recognize the emotions of others by running implicit motor programmes responsible for the production of that expression. Previous work has tested this theory by examining facial expression recognition in participants with Möbius sequence, a condition characterized by congenital bilateral facial paralysis. However, a mixed pattern of findings has emerged, and it has not yet been tested whether these individuals can imagine facial expressions, a process also hypothesized to be underpinned by proprioceptive feedback from the face. We investigated this issue by examining expression recognition and imagery in six participants with Möbius sequence, and also carried out tests assessing facial identity and object recognition, as well as basic visual processing. While five of the six participants presented with expression recognition impairments, only one was impaired at the imagery of facial expressions. Further, five participants presented with other difficulties in the recognition of facial identity or objects, or in lower-level visual processing. We discuss the implications of our findings for the reverse simulation model, and suggest that facial identity recognition impairments may be more severe in the condition than has previously been noted

Co-Processed Excipients for Dispersible Tablets—Part 2: Patient Acceptability

Palatability and patient acceptability are critical attributes of dispersible tablet formulation. Co-processed excipients could provide improved organoleptic profile due to rational choice of excipients and manufacturing techniques. The aim of this study was to identify the most suitable co-processed excipient to use within directly compressible dispersible tablet formulations. Nine excipients, selected based on successful manufacturability, were investigated in a randomised, preference and acceptability testing in 24 healthy adult volunteers. Excipients were classified in order of preference as follows (from most preferred): SmartEx QD100 > F-Melt Type C > F-Melt Type M > MicroceLac > Ludiflash > CombiLac > Pharmaburst 500 > Avicel HFE-102 > Avicel PH-102. Broad differences were identified in terms of acceptability, with SmartEx QD100 being ‘very acceptable’, F-Melt Type C, F-Melt Type M and MicroceLac being ‘acceptable’, Ludiflash, CombiLac and Pharmaburst 500 being ‘neutral’ and Avicel products being ‘very unacceptable’ based on ratings using 5-point hedonic scales. Organoleptic differences were ascribed to different composition and physical properties of excipients, resulting in dissimilar taste and mouth-feel. Excipients with particle size in water larger than 200-250 µm were considered poorly acceptable, which supports the use of this value as a threshold for maximum particle size of dispersible formulation. The most promising co-processed excipients for directly compressible dispersible tablets were successfully identified

Retinoic Acid Signalling and the Control of Meiotic Entry in the Human Fetal Gonad

The development of mammalian fetal germ cells along oogenic or spermatogenic fate trajectories is dictated by signals from the surrounding gonadal environment. Germ cells in the fetal testis enter mitotic arrest, whilst those in the fetal ovary undergo sex-specific entry into meiosis, the initiation of which is thought to be mediated by selective exposure of fetal ovarian germ cells to mesonephros-derived retinoic acid (RA). Aspects of this model are hard to reconcile with the spatiotemporal pattern of germ cell differentiation in the human fetal ovary, however. We have therefore examined the expression of components of the RA synthesis, metabolism and signalling pathways, and their downstream effectors and inhibitors in germ cells around the time of the initiation of meiosis in the human fetal gonad. Expression of the three RA-synthesising enzymes, ALDH1A1, 2 and 3 in the fetal ovary and testis was equal to or greater than that in the mesonephros at 8–9 weeks gestation, indicating an intrinsic capacity within the gonad to synthesise RA. Using immunohistochemistry to detect RA receptors RARα, β and RXRα, we find germ cells to be the predominant target of RA signalling in the fetal human ovary, but also reveal widespread receptor nuclear localization indicative of signalling in the testis, suggesting that human fetal testicular germ cells are not efficiently shielded from RA by the action of the RA-metabolising enzyme CYP26B1. Consistent with this, expression of CYP26B1 was greater in the human fetal ovary than testis, although the sexually-dimorphic expression patterns of the germ cell-intrinsic regulators of meiotic initiation, STRA8 and NANOS2, appear conserved. Finally, we demonstrate that RA induces a two-fold increase in STRA8 expression in cultures of human fetal testis, but is not sufficient to cause widespread meiosis-associated gene expression. Together, these data indicate that while local production of RA within the fetal ovary may be important in regulating the onset of meiosis in the human fetal ovary, mechanisms other than CYP26B1-mediated metabolism of RA may exist to inhibit the entry of germ cells into meiosis in the human fetal testis

Improving Ethical Review of Research Involving Incentives for Health Promotion

Alex London and colleagues propose new ethical frameworks for evaluating the risks associated with research in which financial or other incentives are used to promote healthy behavior

ES-Cell Derived Hematopoietic Cells Induce Transplantation Tolerance

Background: Bone marrow cells induce stable mixed chimerism under appropriate conditioning of the host, mediating the induction of transplantation tolerance. However, their strong immunogenicity precludes routine use in clinical transplantation due to the need for harsh preconditioning and the requirement for toxic immunosuppression to prevent rejection and graft-versus-host disease. Alternatively, embryonic stem (ES) cells have emerged as a potential source of less immunogenic hematopoietic progenitor cells (HPCs). Up till now, however, it has been difficult to generate stable hematopoietic cells from ES cells. Methodology/Principal Findings: Here, we derived CD45 + HPCs from HOXB4-transduced ES cells and showed that they poorly express MHC antigens. This property allowed their long-term engraftment in sublethally irradiated recipients across MHC barriers without the need for immunosuppressive agents. Although donor cells declined in peripheral blood over 2 months, low level chimerism was maintained in the bone marrow of these mice over 100 days. More importantly, chimeric animals were protected from rejection of donor-type cardiac allografts. Conclusions: Our data show, for the first time, the efficacy of ES-derived CD45 + HPCs to engraft in allogenic recipient