Perspectives of application for nanoparticles prepared by CO2 laser pyrolysis: from ceramic nanocomposites to nanofluids

Nanoparticles are one of the main ingredients for the realization of a wide range of nanostructured materials and devices with potential applications in several research areas and industrial sectors, hence their synthesis is a critical step in the development of nanotechnologies. Here we report on the preparation of several types of nanoparticles by laser pyrolysis of gas phase or vapour phase precursors, a very flexible and scalable synthesis route. A critical insight is given into the perspectives of practical applications of these nanoparticles in a number of fields ranging from the fabrication of ceramic nanocomposites to wear resistant coatings, from fluorophores for bio-imaging to nanofluids for efficient thermal management, from nanocoatings for cultural heritage preservation to the realization of a new class of inks for ink-jet printing applications

Excitonic properties of strained wurtzite and zinc-blende GaN/Al(x)Ga(1-x)N quantum dots

We investigate exciton states theoretically in strained GaN/AlN quantum dots with wurtzite (WZ) and zinc-blende (ZB) crystal structures, as well as strained WZ GaN/AlGaN quantum dots. We show that the strain field significantly modifies the conduction and valence band edges of GaN quantum dots. The piezoelectric field is found to govern excitonic properties of WZ GaN/AlN quantum dots, while it has a smaller effect on WZ GaN/AlGaN, and very little effect on ZB GaN/AlN quantum dots. As a result, the exciton ground state energy in WZ GaN/AlN quantum dots, with heights larger than 3 nm, exhibits a red shift with respect to the bulk WZ GaN energy gap. The radiative decay time of the red-shifted transitions is large and increases almost exponentially from 6.6 ns for quantum dots with height 3 nm to 1100 ns for the quantum dots with height 4.5 nm. In WZ GaN/AlGaN quantum dots, both the radiative decay time and its increase with quantum dot height are smaller than those in WZ GaN/AlN quantum dots. On the other hand, the radiative decay time in ZB GaN/AlN quantum dots is of the order of 0.3 ns, and is almost independent of the quantum dot height. Our results are in good agreement with available experimental data and can be used to optimize GaN quantum dot parameters for proposed optoelectronic applications.Comment: 18 pages, accepted for publication in the Journal of Applied Physic

Quantum interference in nanofractals and its optical manifestation

We consider quantum interferences of ballistic electrons propagating inside fractal structures with nanometric size of their arms. We use a scaling argument to calculate the density of states of free electrons confined in a simple model fractal. We show how the fractal dimension governs the density of states and optical properties of fractal structures in the RF-IR region. We discuss the effect of disorder on the density of states along with the possibility of experimental observation.Comment: 19 pages, 6 figure

SILVER-SENSITIZED ERBIUM-DOPED ION-EXCHANGED SOL-GEL WAVEGUIDES

Ag- and Er-doped glass films have been synthesized with a combined sol–gel and ion-exchange route. The introduction of silver as erbium sensitizer in the film was obtained by ion exchanging Er-doped SiO2–Al2O3–Na2O sol–gel films. The films were subsequently annealed under controlled atmosphere to induce the migration and aggregation of the metal ions. Films showed different Er3+ photoluminescence behaviors depending on silver concentration and aggregation state. The interaction between erbium ions and Ag centers has been investigated and enhancement of the excitation cross section due to the silver sensitizing effect has been demonstrated. The developed synthesis also allowed the realization of erbiumdoped channel waveguides by a selective Na–Ag ion-exchange process

Novel biomaterials: plasma-enabled nanostructures and functions

Material processing techniques utilizing low-temperature plasmas as the main process tool feature many unique capabilities for the fabrication of various nanostructured materials. As compared with the neutral-gas based techniques and methods, the plasma-based approaches offer higher levels of energy and flux controllability, often leading to higher quality of the fabricated nanomaterials and sometimes to the synthesis of the hierarchical materials with interesting properties. Among others, nanoscale biomaterials attract significant attention due to their special properties towards the biological materials (proteins, enzymes), living cells and tissues. This review briefly examines various approaches based on the use of low-temperature plasma environments to fabricate nanoscale biomaterials exhibiting high biological activity, biological inertness for drug delivery system, and other features of the biomaterials make them highly attractive. In particular, we briefly discuss the plasma-assisted fabrication of gold and silicon nanoparticles for bio-applications; carbon nanoparticles for bioimaging and cancer therapy; carbon nanotube-based platforms for enzyme production and bacteria growth control, and other applications of low-temperature plasmas in the production of biologically-active materials

Plasma synthesis of single crystal silicon nanoparticles for novel electronic device applications

Single-crystal nanoparticles of silicon, several tens of nm in diameter, may be suitable as building blocks for single-nanoparticle electronic devices. Previous studies of nanoparticles produced in low-pressure plasmas have demonstrated the synthesis nanocrystals of 2-10 nm diameter but larger particles were amorphous or polycrystalline. This work reports the use of a constricted, filamentary capacitively coupled low-pressure plasma to produce single-crystal silicon nanoparticles with diameters between 20-80 nm. Particles are highly oriented with predominant cubic shape. The particle size distribution is rather monodisperse. Electron microscopy studies confirm that the nanoparticles are highly oriented diamond-cubic silicon.Comment: accepted for publication in Plasma Physics and Controlled Fusion, scheduled for Dec. 2004 F

Tuning the energetics and tailoring the optical properties of silver clusters confined in zeolites

The integration of metal atoms and clusters in well-defined dielectric cavities is a powerful strategy to impart new properties to them that depend on the size and geometry of the confined space as well as on metal-host electrostatic interactions. Here, we unravel the dependence of the electronic properties of metal clusters on space confinement by studying the ionization potential of silver clusters embedded in four different zeolite environments over a range of silver concentrations. Extensive characterization reveals a strong influence of silver loading and host environment on the cluster ionization potential, which is also correlated to the cluster's optical and structural properties. Through fine-tuning of the zeolite host environment, we demonstrate photoluminescence quantum yields approaching unity. This work extends our understanding of structure property relationships of small metal clusters and applies this understanding to develop highly photoluminescent materials with potential applications in optoelectronics and bioimaging

Factors Associated with Revision Surgery after Internal Fixation of Hip Fractures

Background: Femoral neck fractures are associated with high rates of revision surgery after management with internal fixation. Using data from the Fixation using Alternative Implants for the Treatment of Hip fractures (FAITH) trial evaluating methods of internal fixation in patients with femoral neck fractures, we investigated associations between baseline and surgical factors and the need for revision surgery to promote healing, relieve pain, treat infection or improve function over 24 months postsurgery. Additionally, we investigated factors associated with (1) hardware removal and (2) implant exchange from cancellous screws (CS) or sliding hip screw (SHS) to total hip arthroplasty, hemiarthroplasty, or another internal fixation device. Methods: We identified 15 potential factors a priori that may be associated with revision surgery, 7 with hardware removal, and 14 with implant exchange. We used multivariable Cox proportional hazards analyses in our investigation. Results: Factors associated with increased risk of revision surgery included: female sex, [hazard ratio (HR) 1.79, 95% confidence interval (CI) 1.25-2.50; P = 0.001], higher body mass index (fo