Contradictions in the Development of the Welfare Non-Profit Sector in Russia

Received 28 April 2023. Accepted 8 August 2023. Published online 6 October 2023.The article focuses on the core contradictions within the development of the social non-profit sector in Russia. The empirical basis of the study comprises statistical data, legal documents regulating the social services’ sphere, research data from previous studies conducted in Russia, as well as qualitative data collected for this study. The introduction provides background information on the stages of reforming the social service system in Russia. The first part is devoted to the contradictions between international trends and Russian patterns. In line with a neoliberal approach, non-profit NGOs play a significant role as key actors in social work providing social services for different client groups. At the same time, they are not independent and Russian civil society is not yet strong enough to realize social rights of citizens. In the next section, some of the key issues of interaction between the government and NGOs are discussed. An analysis of the current situation demonstrates that while a social partnership between the state and NGOs is affirmed by authorities on official level, in practice, the state still dominates the social sector. The article then focuses on how Russian NGOs have reoriented their efforts toward financial sustainability through government support.This work was supported by the Russian Science Foundation (RSF) under the project No. 19–18–00246-P, titled “Challenges of the transformation of welfare state in Russia: institutional changes, social investment, digitalization of social services”, implemented at St. Petersburg State University

Social investment: Problems and development strategies

We present the findings of a survey aimed at identifying expert opinions about social investment policies. Our sample includes respondents from Russian regions (n = 160) involved in the production of social services – specialists and heads of state social institutions, non-profit organizations, social entrepreneurs, and authorities. Research findings suggest key factors that might contribute to the development of non-profit sector of social services and social entrepreneurship. The state and local governments are considered by experts as the main investors, while financial investments in the form of budget subsidies and grants are the most anticipated forms for solving regional social issues. Investing in infrastructure and personnel is among the most popular areas for social investment related to the development of new suppliers. According to the respondents, the priority spheres for social entrepreneurship are investments to children, youth, health, and active longevity. The survey participants view social investment as a strategy for the social development of regions based on the achievement of social goals combined with economic results. The professional community considers the lack of interest in the new type of entrepreneurship among residents of the regions, including private investors, and the weak interest of local governments as risks for social investment policy and social entrepreneurship © 2022. Terra Economicus.All Rights Reserved.Russian Science Foundation, RSF: 19-18-00246Funding: The research is prepared with the financial support of the Russian Science Foundation, project № 19-18-00246 “Challenges of transformation of the welfare state in Russia: Institutional changes, social investment, digitalization of social services”, implemented at St. Petersburg State University

Results of a survey of parents about the organization of medical rehabilitation for children with the consequences of perinatal diseases.

The aim of the work was to identify parents' attitudes toward the organization of multilevel medical rehabilitation of children with the consequences of perinatal diseases.Цель работы – выявить отношение родителей к организации многоуровневой медицинской реабилитации детей с последствиями заболеваний перинатального периода

CYTOKINE PROFILE IN VISCERAL OBESITY AND ADVERSE CARDIOVASCULAR PROGNOSIS OF MYOCARDIAL INFARCTION

Presence of myocardial infarction in patients with obesity can lead to an uncontrolled increase in proinflammatory cytokines and unfavorable course of the pathological process. Objective: to study the relationship of key inflammatory factors and the development of complications at different terms after myocardial infarction in patients with visceral obesity. The study involved 94 men with myocardial infarction. Visceral obesity was diagnosed by multi-slice computed tomography (LightspeedVCT 64 ,General Electric,USA). On the 1st and 12th day of hospitalization, we determined serum concentrations of interleukins (TNFα, IL-1β, IL-6, IL-8 IL-10 and IL-12), and C-reactive protein. Adverse cardiovascular events were documented during the next year. The most informative indicators were identified by a stepwise logistic regression analysis. In patients with myocardial infarction an imbalance of cytokine profile revealed, i.e., an increase in proinflammatory markers (TNFα, IL-1β, IL-6, IL-8, IL-12, CRP), along with decrease in IL-10, being more pronounced in cases of visceral obesity. Among the studied markers, closest relationship was observed between visceral obesity and serum concentrations of IL-6 and CRP. Over the year, adverse cardiovascular events proved to be more frequent in patients with visceral obesity. Post-infarction complication risk was associated with higher concentrations of IL-6, IL-12 and IL-10 deficiency. Hence, development of adverse cardiovascular events within a year after myocardial infarction is more typical to the patients with visceral obesity, and is accompanied by activation of proinflammatory cytokines and IL-10 deficiency

Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET

Effect of ELMs on fuel retention at the bulk W target of JET ITER-Like Wall was studied with multi-scale calculations. Plasma input parameters were taken from ELMy H-mode plasma experiment. The energetic intra-ELM fuel particles get implanted and create near-surface defects up to depths of few tens of nm, which act as the main fuel trapping sites during ELMs. Clustering of implantation-induced vacancies were found to take place. The incoming flux of inter-ELM plasma particles increases the different filling levels of trapped fuel in defects. The temperature increase of the W target during the pulse increases the fuel detrapping rate. The inter-ELM fuel particle flux refills the partially emptied trapping sites and fills new sites. This leads to a competing effect on the retention and release rates of the implanted particles. At high temperatures the main retention appeared in larger vacancy clusters due to increased clustering rate

The effect of beryllium oxide on retention in JET ITER-like wall tiles

Preliminary results investigating the microstructure, bonding and effect of beryllium oxide formation on retention in the JET ITER-like wall beryllium tiles, are presented. The tiles have been investigated by several techniques: Scanning Electron Microscopy (SEM) equipped with Energy Dispersive X-ray (EDX), Transmission Electron microscopy (TEM) equipped with EDX and Electron Energy Loss Spectroscopy (EELS), Raman Spectroscopy and Thermal Desorption Spectroscopy (TDS). This paper focuses on results from melted materials of the dump plate tiles in JET. From our results and the literature, it is concluded, beryllium can form micron deep oxide islands contrary to the nanometric oxides predicted under vacuum conditions. The deepest oxides analyzed were up to 2-micron thicknesses. The beryllium Deuteroxide (BeOxDy) bond was found with Raman Spectroscopy. Application of EELS confirmed the oxide presence and stoichiometry. Literature suggests these oxides form at temperatures greater than 700 °C where self-diffusion of beryllium ions through the surface oxide layer can occur. Further oxidation is made possible between oxygen plasma impurities and the beryllium ions now present at the wall surface. Under Ultra High Vacuum (UHV) nanometric Beryllium oxide layers are formed and passivate at room temperature. After continual cyclic heating (to the point of melt formation) in the presence of oxygen impurities from the plasma, oxide growth to the levels seen experimentally (approximately two microns) is proposed. This retention mechanism is not considered to contribute dramatically to overall retention in JET, due to low levels of melt formation. However, this mechanism, thought the result of operation environment and melt formation, could be of wider concern to ITER, dependent on wall temperatures

Determination of tungsten sources in the JET-ILW divertor by spectroscopic imaging in the presence of a strong plasma continuum

The identification of the sources of atomic tungsten and the measurement of their radiation distribution in front of all plasma-facing components has been performed in JET with the help of two digital cameras with the same two-dimensional view, equipped with interference filters of different bandwidths centred on theW I (400.88 nm) emission line. A new algorithm for the subtraction of the continuum radiation was successfully developed and is now used to evaluate the W erosion even in the inner divertor region where the strong recombination emission is dominating over the tungsten emission. Analysis of W sputtering and W redistribution in the divertor by video imaging spectroscopy with high spatial resolution for three different magnetic configurations was performed. A strong variation of the emission of the neutral tungsten in toroidal direction and corresponding W erosion has been observed. It correlates strongly with the wetted area with a maximal W erosion at the edge of the divertor tile

Improved ERO modelling of beryllium erosion at ITER upper first wall panel using JET-ILW and PISCES-B experience

ERO is a 3D Monte-Carlo impurity transport and plasma-surface interaction code. In 2011 it was applied for the ITER first wall (FW) life time predictions [1] (critical blanket module BM11). After that the same code was significantly improved during its application to existing fusion-relevant plasma devices: the tokamak JET equipped with an ITER-like wall and linear plasma device PISCES-B. This has allowed testing the sputtering data for beryllium (Be) and showing that the “ERO-min” fit based on the large (50%) deuterium (D) surface content is well suitable for plasma-wetted areas (D plasma). The improved procedure for calculating of the effective sputtering yields for each location along the plasma-facing surface using the recently developed semi-analytical sheath approach was validated. The re-evaluation of the effective yields for BM11 following the similar revisit of the JET data has indicated significant increase of erosion and motivated the current re-visit of ERO simulations

Beryllium global erosion and deposition at JET-ILW simulated with ERO2.0

The recently developed Monte-Carlo code ERO2.0 is applied to the modelling of limited and diverted discharges at JET with the ITER-like wall (ILW). The global beryllium (Be) erosion and deposition is simulated and compared to experimental results from passive spectroscopy. For the limiter configuration, it is demonstrated that Be self-sputtering is an important contributor (at least 35%) to the Be erosion. Taking this contribution into account, the ERO2.0 modelling confirms previous evidence that high deuterium (D) surface concentrations of up to ∼50% atomic fraction provide a reasonable estimate of Be erosion in plasma-wetted areas. For the divertor configuration, it is shown that drifts can have a high impact on the scrape-off layer plasma flows, which in turn affect global Be transport by entrainment and lead to increased migration into the inner divertor. The modelling of the effective erosion yield for different operational phases (ohmic, L- and H-mode) agrees with experimental values within a factor of two, and confirms that the effective erosion yield decreases with increasing heating power and confinement