Use of combined scaling of real seismic records to obtain code-compliant sets of accelerograms: application for the city of Bucharest

A recently proposed method for scaling real accelerograms to obtain sets of code-compliant records is assessed. The method, which uses combined time and amplitude scaling, corroborated with an imposed value of an instrumental, Arias-type intensity, allows the generation of sets of accelerograms for which the values of the mean response spectrum for a given period range are not less than 90% of the elastic response spectrum specified by the code. The method, which is compliant with both for the Romanian seismic code, P100-1/2006, and Eurocode 8, was described in previous papers. Based on dynamic analyses of single-degree-of freedom (SDOF) and of multi-degree-of-freedom (MDOF) systems, a detailed application and assessment of the method is performed, for the case of the long corner period design spectrum in Bucharest. Conclusions are drawn on the advantages of the method, as well as on its potential improvement in the future

Droplet actuation induced by coalescence: experimental evidences and phenomenological modeling

This paper considers the interaction between two droplets placed on a substrate in immediate vicinity. We show here that when the two droplets are of different fluids and especially when one of the droplet is highly volatile, a wealth of fascinating phenomena can be observed. In particular, the interaction may result in the actuation of the droplet system, i.e. its displacement over a finite length. In order to control this displacement, we consider droplets confined on a hydrophilic stripe created by plasma-treating a PDMS substrate. This controlled actuation opens up unexplored opportunities in the field of microfluidics. In order to explain the observed actuation phenomenon, we propose a simple phenomenological model based on Newton's second law and a simple balance between the driving force arising from surface energy gradients and the viscous resistive force. This simple model is able to reproduce qualitatively and quantitatively the observed droplet dynamics

Chaos in atmospheric-pressure plasma jets

This article was published in the journal, Plasma Sources Science and Technology [© IOP Publishing Ltd]. The definitive version is available at: http://dx.doi.org/10.1088/0963-0252/21/3/034008We report detailed characterization of a low-temperature atmospheric-pressure plasma jet that exhibits regimes of periodic, quasi-periodic and chaotic behaviors. Power spectra, phase portraits, stroboscopic section and bifurcation diagram of the discharge current combine to comprehensively demonstrate the existence of chaos, and this evidence is strengthened with a nonlinear dynamics analysis using two control parameters that maps out periodic, period-multiplication, and chaotic regimes over a wide range of the input voltage and gas flow rate. In addition, optical emission signatures of excited plasma species are used as the second and independent observable to demonstrate the presence of chaos and period-doubling in both the concentrations and composition of plasma species, suggesting a similar array of periodic, quasi-periodic and chaotic regimes in plasma chemistry. The presence of quasi-periodic and chaotic regimes in structurally unbounded low-temperature atmospheric plasmas not only is important as a fundamental scientific topic but also has interesting implications for their numerous applications. Chaos may be undesirable for industrial applications where cycle-to-cycle reproducibility is important, yet for treatment of cell-containing materials including living tissues it may offer a novel route to combat some of the major challenges in medicine such as drug resistance. Chaos in low-temperature atmospheric plasmas and its effective control are likely to open up new vistas for medical technologies

Optimization of atmospheric plasma treatment of LDPE films: Influence on adhesive properties and ageing behavior

One of the major disadvantages of low density polyethylene (LDPE) films is their poor adhesive properties. Therefore, LDPE films have been treated with atmospheric pressure air plasma in order to improve their surface properties. So as to simulate the possible conditions in an industrial process, the samples have been treated with two different sample distances (6 and 10 mm), and treatment rates between 100 and 1000 mm s-1. The different sample distances are the distance of the sample from the plasma source. The variation of the surface properties and adhesion characteristics of the films were investigated for different aging times after plasma exposure (up to 21 days) using contact angle measurement, atomic force microscopy, weight loss measurements and shear test. Results show that the treatment increases the polar component () and these changes improve adhesive properties of the material. After the twenty-first day, the ageing process causes a decrease of wettability and adhesive properties of the LDPE films (up to 60%).Fombuena Borrás, V.; García Sanoguera, D.; Sánchez Nacher, L.; Balart Gimeno, RA.; Boronat Vitoria, T. (2014). Optimization of atmospheric plasma treatment of LDPE films: Influence on adhesive properties and ageing behavior. Journal of Adhesion Science and Technology. 28(1):97-113. doi:10.1080/01694243.2013.847045S97113281Achilias, D. S., Roupakias, C., Megalokonomos, P., Lappas, A. A., & Antonakou, Ε. V. (2007). Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP). Journal of Hazardous Materials, 149(3), 536-542. doi:10.1016/j.jhazmat.2007.06.076Friedman, M., & Walsh, G. (2002). High performance films: Review of new materials and trends. Polymer Engineering & Science, 42(8), 1756-1788. doi:10.1002/pen.11069Wiles, D. M., & Scott, G. (2006). Polyolefins with controlled environmental degradability. Polymer Degradation and Stability, 91(7), 1581-1592. doi:10.1016/j.polymdegradstab.2005.09.010Gao, J., Lei, J., Li, Q., & Ye, S. (2004). Functionalized low-density polyethylene via a novel photografting method and its adhesion properties. Journal of Adhesion Science and Technology, 18(2), 195-203. doi:10.1163/156856104772759403Shenton, M. J., Lovell-Hoare, M. C., & Stevens, G. C. (2001). Adhesion enhancement of polymer surfaces by atmospheric plasma treatment. Journal of Physics D: Applied Physics, 34(18), 2754-2760. doi:10.1088/0022-3727/34/18/307Belgacem, M. N., Salon-Brochier, M. C., Krouit, M., & Bras, J. (2011). Recent Advances in Surface Chemical Modification of Cellulose Fibres. Journal of Adhesion Science and Technology, 25(6-7), 661-684. doi:10.1163/016942410x525867Friedrich, J., Unger, W., & Lippitz, A. (1995). Plasma modification of polymer surfaces. Macromolecular Symposia, 100(1), 111-115. doi:10.1002/masy.19951000118Ladizesky, N. H., & Ward, I. M. (1989). The adhesion behaviour of high modulus polyethylene fibres following plasma and chemical treatment. Journal of Materials Science, 24(10), 3763-3773. doi:10.1007/bf02385768Nardin, M., & Ward, I. M. (1987). Influence of surface treatment on adhesion of polyethylene fibres. Materials Science and Technology, 3(10), 814-826. doi:10.1179/mst.1987.3.10.814Villagra Di Carlo, B., Gottifredi, J. C., & Habert, A. C. (2010). Synthesis and characterization of composite membrane by deposition of acrylic acid plasma polymer onto pre-treated polyethersulfone support. Journal of Materials Science, 46(6), 1850-1856. doi:10.1007/s10853-010-5012-4Matsunaga, M., & Whitney, P. J. (2000). Surface changes brought about by corona discharge treatment of polyethylene film and the effect on subsequent microbial colonisation. Polymer Degradation and Stability, 70(3), 325-332. doi:10.1016/s0141-3910(00)00105-1Novák, I., Pollák, V., & Chodák, I. (2006). Study of Surface Properties of Polyolefins Modified by Corona Discharge Plasma. Plasma Processes and Polymers, 3(4-5), 355-364. doi:10.1002/ppap.200500163Arpagaus, C., Rossi, A., & Rudolf von Rohr, P. (2005). Short-time plasma surface modification of HDPE powder in a Plasma Downer Reactor – process, wettability improvement and ageing effects. Applied Surface Science, 252(5), 1581-1595. doi:10.1016/j.apsusc.2005.02.099Morra, M., Occhiello, E., Marola, R., Garbassi, F., Humphrey, P., & Johnson, D. (1990). On the aging of oxygen plasma-treated polydimethylsiloxane surfaces. Journal of Colloid and Interface Science, 137(1), 11-24. doi:10.1016/0021-9797(90)90038-pKim, K. S., Ryu, C. M., Park, C. S., Sur, G. S., & Park, C. E. (2003). Investigation of crystallinity effects on the surface of oxygen plasma treated low density polyethylene using X-ray photoelectron spectroscopy. Polymer, 44(20), 6287-6295. doi:10.1016/s0032-3861(03)00674-8Kim, S. H., Ha, H. J., Ko, Y. K., Yoon, S. J., Rhee, J. M., Kim, M. S., … Khang, G. (2007). Correlation of proliferation, morphology and biological responses of fibroblasts on LDPE with different surface wettability. Journal of Biomaterials Science, Polymer Edition, 18(5), 609-622. doi:10.1163/156856207780852514Borcia, G., Anderson, C. A., & Brown, N. M. D. (2004). The surface oxidation of selected polymers using an atmospheric pressure air dielectric barrier discharge. Part I. Applied Surface Science, 221(1-4), 203-214. doi:10.1016/s0169-4332(03)00879-1Pascual, M., Calvo, O., Sanchez-Nácher, L., Bonet, M. A., Garcia-Sanoguera, D., & Balart, R. (2009). Optimization of adhesive joints of low density polyethylene (LDPE) composite laminates with polyolefin foam using corona discharge plasma. Journal of Applied Polymer Science, 114(5), 2971-2977. doi:10.1002/app.30906Encinas, N., Díaz-Benito, B., Abenojar, J., & Martínez, M. A. (2010). Extreme durability of wettability changes on polyolefin surfaces by atmospheric pressure plasma torch. Surface and Coatings Technology, 205(2), 396-402. doi:10.1016/j.surfcoat.2010.06.069Takke, V., Behary, N., Perwuelz, A., & Campagne, C. (2009). Studies on the atmospheric air-plasma treatment of PET (polyethylene terephtalate) woven fabrics: Effect of process parameters and of aging. Journal of Applied Polymer Science, 114(1), 348-357. doi:10.1002/app.30618Awaja, F., Gilbert, M., Kelly, G., Fox, B., & Pigram, P. J. (2009). Adhesion of polymers. Progress in Polymer Science, 34(9), 948-968. doi:10.1016/j.progpolymsci.2009.04.007Garcia, D., Sanchez, L., Fenollar, O., Lopez, R., & Balart, R. (2008). Modification of polypropylene surface by CH4–O2 low-pressure plasma to improve wettability. Journal of Materials Science, 43(10), 3466-3473. doi:10.1007/s10853-007-2322-2Guimond, S., & Wertheimer, M. R. (2004). Surface degradation and hydrophobic recovery of polyolefins treated by air corona and nitrogen atmospheric pressure glow discharge. Journal of Applied Polymer Science, 94(3), 1291-1303. doi:10.1002/app.21134Pascual, M., Balart, R., Sánchez, L., Fenollar, O., & Calvo, O. (2008). Study of the aging process of corona discharge plasma effects on low density polyethylene film surface. Journal of Materials Science, 43(14), 4901-4909. doi:10.1007/s10853-008-2712-0Sanchis, R., Fenollar, O., García, D., Sánchez, L., & Balart, R. (2008). Improved adhesion of LDPE films to polyolefin foams for automotive industry using low-pressure plasma. International Journal of Adhesion and Adhesives, 28(8), 445-451. doi:10.1016/j.ijadhadh.2008.04.002Fresnais, J., Chapel, J. P., Benyahia, L., & Poncin-Epaillard, F. (2009). Plasma-Treated Superhydrophobic Polyethylene Surfaces: Fabrication, Wetting and Dewetting Properties. Journal of Adhesion Science and Technology, 23(3), 447-467. doi:10.1163/156856108x370127Abenojar, J., Colera, I., Martínez, M. A., & Velasco, F. (2010). Study by XPS of an Atmospheric Plasma-Torch Treated Glass: Influence on Adhesion. Journal of Adhesion Science and Technology, 24(11-12), 1841-1854. doi:10.1163/016942410x507614Lommatzsch, U., Pasedag, D., Baalmann, A., Ellinghorst, G., & Wagner, H.-E. (2007). Atmospheric Pressure Plasma Jet Treatment of Polyethylene Surfaces for Adhesion Improvement. Plasma Processes and Polymers, 4(S1), S1041-S1045. doi:10.1002/ppap.200732402Balu, B., Berry, A. D., Patel, K. T., Breedveld, V., & Hess, D. W. (2011). Directional Mobility and Adhesion of Water Drops on Patterned Superhydrophobic Surfaces. Journal of Adhesion Science and Technology, 25(6-7), 627-642. doi:10.1163/016942410x525849Bhattacharya, S., Singh, R. K., Mandal, S., Ghosh, A., Bok, S., Korampally, V., … Gangopadhyay, S. (2010). Plasma Modification of Polymer Surfaces and Their Utility in Building Biomedical Microdevices. Journal of Adhesion Science and Technology, 24(15-16), 2707-2739. doi:10.1163/016942410x511105Das, S., Neogi, S., Chainy, G. B. N., & Guha, S. K. (2011). A Novel Two-Step Procedure for Plasma Surface Modification of Low-Density Polyethylene for Improved Drug Adhesion in Intra Uterine Devices (IUDs). Journal of Adhesion Science and Technology, 25(1-3), 151-167. doi:10.1163/016942410x503285Schulz, U., Munzert, P., & Kaiser, N. (2010). Plasma Surface Modification of PMMA for Optical Applications. Journal of Adhesion Science and Technology, 24(7), 1283-1289. doi:10.1163/016942409x12561252292026Silverstein, M. S., Breuer, O., & Dodiuk, H. (1994). Surface modification of UHMWPE fibers. Journal of Applied Polymer Science, 52(12), 1785-1795. doi:10.1002/app.1994.070521213Inagaki, N., Narushim, K., Tuchida, N., & Miyazaki, K. (2004). Surface characterization of plasma-modified poly(ethylene terephthalate) film surfaces. Journal of Polymer Science Part B: Polymer Physics, 42(20), 3727-3740. doi:10.1002/polb.20234Nakamatsu, J., Delgado-Aparicio, L. F., Da Silva, R., & Soberon, F. (1999). Ageing of plasma-treated poly(tetrafluoroethylene) surfaces. Journal of Adhesion Science and Technology, 13(7), 753-761. doi:10.1163/156856199x00983Yun, Y. I., Kim, K. S., Uhm, S.-J., Khatua, B. B., Cho, K., Kim, J. K., & Park, C. E. (2004). Aging behavior of oxygen plasma-treated polypropylene with different crystallinities. Journal of Adhesion Science and Technology, 18(11), 1279-1291. doi:10.1163/1568561041588200Morent, R., De Geyter, N., Leys, C., Gengembre, L., & Payen, E. (2007). Study of the ageing behaviour of polymer films treated with a dielectric barrier discharge in air, helium and argon at medium pressure. Surface and Coatings Technology, 201(18), 7847-7854. doi:10.1016/j.surfcoat.2007.03.018Zhao, B., & Kwon, H. J. (2011). Adhesion of Polymers in Paper Products from the Macroscopic to Molecular Level — An Overview. Journal of Adhesion Science and Technology, 25(6-7), 557-579. doi:10.1163/016942410x52582