Scheduling in the manufacture of evaporative air conditioners

The MISG examined the problem of scheduling production of air conditioners at Seeley International. Seeley's objective was to meet their demand in a more cost-effective way. Two models are proposed to achieve this objective. A long term master production schedule with a yearly planning horizon was formulated to give Seeley a broad based schedule for planning production to meet forecast demands and production constraints. Output from this model is designed to provide the appropriate number of units of each product type or sub-assembly item to be produced in the following week. This output is then designed to be the input to a more detailed short term model for scheduling production at the machine level. The short term model is formulated to handle a mixture of both finished products and sub-assemblies. The objective of the short term model is to minimise total production time to free up the use of resources in order to allow for external orders. Directions for further work are discussed

The effect of thermal vibrations on extended x-ray absorption fine structure. I

The form of the Debye–Waller factor in EXAFS is discussed in detail, and an expression is obtained for this factor in a general three‐atom system of C_s symmetry. The normal modes which contribute to the Debye–Waller factors for each scattering path are dependent on the symmetry of the system. A series of model three‐atom systems with C_(2v) symmetry are studied and the Debye–Waller factors as a function of the bridging angle are discussed for each of these systems. The temperature dependence of the Debye‐Waller factor for each scattering path is also studied. In a system of C_(2v) symmetry, approximating the double and triple scattering Debye–Waller factors by the second shell single scattering factor is shown to be strictly valid only for a system close to linearity. The error due to this approximation is dependent upon the amplitude of the individual scattering paths and is shown to increase with temperature. When the single scattering contribution is unimportant, there is shown to exist a temperature where the above approximation is exact

Evaluation of atmospheric density models and preliminary functional specifications for the Langley Atmospheric Information Retrieval System (LAIRS)

This document presents the results of an extensive survey and comparative evaluation of current atmosphere and wind models for inclusion in the Langley Atmospheric Information Retrieval System (LAIRS). It includes recommended models for use in LAIRS, estimated accuracies for the recommended models, and functional specifications for the development of LAIRS

Langley Atmospheric Information Retrieval System (LAIRS): System description and user's guide

This document presents the user's guide, system description, and mathematical specifications for the Langley Atmospheric Information Retrieval System (LAIRS). It also includes a description of an optimal procedure for operational use of LAIRS. The primary objective of the LAIRS Program is to make it possible to obtain accurate estimates of atmospheric pressure, density, temperature, and winds along Shuttle reentry trajectories for use in postflight data reduction

Trophic classification of selected Colorado lakes

Multispectral scanner data, acquired over several Colorado lakes using LANDSAT-1 and aircraft, were used in conjunction with contact-sensed water quality data to determine the feasibility of assessing lacustrine trophic levels. A trophic state index was developed using contact-sensed data for several trophic indicators. Relationships between the digitally processed multispectral scanner data, several trophic indicators, and the trophic index were examined using a supervised multispectral classification technique and regression techniques. Statistically significant correlations exist between spectral bands, several of the trophic indicators and the trophic state index. Color-coded photomaps were generated which depict the spectral aspects of trophic state

Multivariable control theory applied to hierarchial attitude control for planetary spacecraft

Multivariable control theory is applied to the design of a hierarchial attitude control system for the CARD space vehicle. The system selected uses reaction control jets (RCJ) and control moment gyros (CMG). The RCJ system uses linear signal mixing and a no-fire region similar to that used on the Skylab program; the y-axis and z-axis systems which are coupled use a sum and difference feedback scheme. The CMG system uses the optimum steering law and the same feedback signals as the RCJ system. When both systems are active the design is such that the torques from each system are never in opposition. A state-space analysis was made of the CMG system to determine the general structure of the input matrices (steering law) and feedback matrices that will decouple the axes. It is shown that the optimum steering law and proportional-plus-rate feedback are special cases. A derivation of the disturbing torques on the space vehicle due to the motion of the on-board television camera is presented. A procedure for computing an upper bound on these torques (given the system parameters) is included

Data analysis in extended x-ray-absorption fine structure: Determination of the background absorption and the threshold energy

Two approaches for the determination of the background absorption (μ_0) in the extended x-ray-absorption fine structure (EXAFS) are presented. Both methods, experimental and computational, take advantage of the damping of the EXAFS amplitude resulting from the convolution with Gaussian functions of different widths. In the experimental method two or more spectra are collected with the use of different spectrometer slit widths, resulting in spectra of different resolutions for the same sample. In the computational approach the convolution is accomplished via a convolution algorithm. The intersection points of the resulting spectra are used to generate μ_0. At the absorption edge, the spectra intersect at a unique point, which is shown to be a measure of the threshold energy, E_0. Illustration of the two methods for background removal is given for a copper-foil sample. The computational approach is superior to the experimental method of damping the EXAFS spectra to give μ_0

Mars Ecopoiesis Testbed

Mars surface conditions where liquid water is absent were simulated for the purposes of laboratory research. A pressure-temperature (P-T) profile was maintained in which no combination of pressure or temperature corresponds to the liquid region of the water phase diagram. The triple point of pure water occurs at T = 0.1oC and P(H2O) = 6.01 mbar; therefore all temperatures and pressures must be kept below these values, respectively. A 35-day test was performed in a commercial planetary simulation system (Techshot, Inc., Greenville, IN) in which the minimum night-time temperature was -80oC, the maximum daytime temperature was +26oC, the simulated day-night light cycle in earth hours was 12-on and 12-off, and the total pressure of the pure CO2 atmosphere was maintained below 11 mbar. Any water present was allowed to equilibrate with the changing temperature and pressure. The gas phase was sampled into a CR1-A condensation-mirror low-pressure hygrometer, which uses liquid nitrogen (down to 77oK) to determine the dew point (Buck Technologies, Boulder, CO). Dew point was measured once every hour and recorded on a data logger, along with the varying temperature in the chamber, from which the partial pressure of water was calculated. The resulting calculated daily cycles were tracked on the water P-T diagram, and no points were found to fall within the liquid-phase region of the diagram. It is concluded that there was no liquid water present throughout the test except during the initial pump-down period when aqueous specimens were introduced on the first day (less than 1 hour). Mars regolith simulant was present during this test, and further investigation is needed to determine whether liquid water could have been present or absent in the regolith in the form of brine. Biological samples consisting of Cyanobacteria: Anabena sp., Chroococcidiopsis CCMEE171, Plectonema boryanum; Eubacteria: Bacillus subtilis, Pseudomonas aeruginosa, and Eukaryota: Chlorella ellipsoidia were maintained in the simulator under the above-described conditions. The exposed specimens were tested for intracellular esterase activity, chlorophyll content (where appropriate) and reproductive survival. All tests yielded low-level positive results in all cases. In parallel to these terrestrial studies a planned design study was undertaken for the proposed test bed. Design requirements include compact assembly for transport and installation on the planetary surface (multiple units per mission would be expected), protective internal package for the release of organisms, a means of atmosphere exchange, access to sunlight, a means of penetrating the planetary surface, and most importantly a means of acquiring regolith while meeting the requirements of planetary protection. In consultation with advisers a design was created, and a large-scale mock-up of this design was fabricated by additive manufacturing at Techshot, Inc. with moving parts that simulated the components of the design. The mock-up assembly has been demonstrated to interested parties. A means of detecting live metabolism will also be included in the test bed. Several options were reviewed, and it is concluded that, by the time the ecopoiesis test bed is ready for testing the optimum instrument will be the equivalent of a hand-held mass spectrometer for metabolic gas analysis. This will maximize versatility and reveal much more information than could a detector of a single product (such as molecular oxygen), and th

A framework for efficient wastewater treatment and recycling systems

Water reuse / Wastewater / Recycling / Pricing / Water allocation / Cost benefit analysis / Wastewater irrigation / Developing countries / Developed countries / Case studies

Defendant\u27s Motion to Exclude Testimony of Robert Parks or Motion for a EVID. R. 104 Hearing to Determine Admissibility

The State argues for either excluding the alleged confession of Richard Eberling as testified to by Robert Parks or, in the alternative, for a hearing to determine admissibility, because the statements do not meet the hearsay exception under Ohio R. Evid. 804(B)(3) allowing for statements made against the interest of the declarant. The State argues that the second element, which requires the statement to be against the penal interests of the declarant, was not satisfied, because the declarant was already serving multiple consecutive sentences in prison, ensuring that he would die in jail before his scheduled release. The State further contends that the third element, which requires corroborating circumstances to indicate the statement\u27s trustworthiness, is not met, because the circumstances show that not only did Eberling previously fail to make any confession when given ample opportunity, but also there exists other evidence that Eberling was not telling the truth