Unified constitutive models for high-temperature structural applications

Unified constitutive models are characterized by the use of a single inelastic strain rate term for treating all aspects of inelastic deformation, including plasticity, creep, and stress relaxation under monotonic or cyclic loading. The structure of this class of constitutive theory pertinent for high temperature structural applications is first outlined and discussed. The effectiveness of the unified approach for representing high temperature deformation of Ni-base alloys is then evaluated by extensive comparison of experimental data and predictions of the Bodner-Partom and the Walker models. The use of the unified approach for hot section structural component analyses is demonstrated by applying the Walker model in finite element analyses of a benchmark notch problem and a turbine blade problem

Constitutive modeling for isotropic materials (HOST)

The results of the third year of work on a program which is part of the NASA Hot Section Technology program (HOST) are presented. The goals of this program are: (1) the development of unified constitutive models for rate dependent isotropic materials; and (2) the demonstration of the use of unified models in structural analyses of hot section components of gas turbine engines. The unified models selected for development and evaluation are those of Bodner-Partom and of Walker. A test procedure was developed for assisting the generation of a data base for the Bodner-Partom model using a relatively small number of specimens. This test procedure involved performing a tensile test at a temperature of interest that involves a succession of strain-rate changes. The results for B1900+Hf indicate that material constants related to hardening and thermal recovery can be obtained on the basis of such a procedure. Strain aging, thermal recovery, and unexpected material variations, however, preluded an accurate determination of the strain-rate sensitivity parameter is this exercise. The effects of casting grain size on the constitutive behavior of B1900+Hf were studied and no particular grain size effect was observed. A systematic procedure was also developed for determining the material constants in the Bodner-Partom model. Both the new test procedure and the method for determining material constants were applied to the alternate material, Mar-M247 . Test data including tensile, creep, cyclic and nonproportional biaxial (tension/torsion) loading were collected. Good correlations were obtained between the Bodner-Partom model and experiments. A literature survey was conducted to assess the effects of thermal history on the constitutive behavior of metals. Thermal history effects are expected to be present at temperature regimes where strain aging and change of microstructure are important. Possible modifications to the Bodner-Partom model to account for these effects are outlined. The use of a unified constitutive model for hot section component analyses was demonstrated by applying the Walker model and the MARC finite-element code to a B1900+Hf airfoil problem

Nonlinear elastic-viscoplastic constitutive equations for aging facial tissues

This paper reports on the initial stages of a project to simulate the nonlinear mechanical behavior of an aging human face. A cross-section of the facial structure is considered to consist of a multilayered composite of tissues with differing mechanical behavior. The constitutive properties of these tissues are incorporated into a finite element model of the three-dimensional facial geometry. Relatively short time (elastic-viscoplastic) behavior is governed by equations previously developed which are consistent with mechanical tests. The long time response is controlled by the aging elastic components of the tissues. An aging function is introduced which, in a simplified manner, captures the observed loss of stiffness of these aging elastic components due to the history of straining as well as other physiological and environmental influences. Calculations have been performed for 30years of exposure to gravitational forces. Progressive gravimetric soft tissue descent is simulated, which is regarded as the main indication of facial aging. Results are presented for the deformations and stress distributions in the layers of the soft tissue

Constitutive modeling for isotropic materials (HOST)

The results of the first year of work on a program to validate unified constitutive models for isotropic materials utilized in high temperature regions of gas turbine engines and to demonstrate their usefulness in computing stress-strain-time-temperature histories in complex three-dimensional structural components. The unified theories combine all inelastic strain-rate components in a single term avoiding, for example, treating plasticity and creep as separate response phenomena. An extensive review of existing unified theories is given and numerical methods for integrating these stiff time-temperature-dependent constitutive equations are discussed. Two particular models, those developed by Bodner and Partom and by Walker, were selected for more detailed development and evaluation against experimental tensile, creep and cyclic strain tests on specimens of a cast nickel base alloy, B19000+Hf. Initial results comparing computed and test results for tensile and cyclic straining for temperature from ambient to 982 C and strain rates from 10(exp-7) 10(exp-3) s(exp-1) are given. Some preliminary date correlations are presented also for highly non-proportional biaxial loading which demonstrate an increase in biaxial cyclic hardening rate over uniaxial or proportional loading conditions. Initial work has begun on the implementation of both constitutive models in the MARC finite element computer code

Towards reduction of type II theories on SU(3) structure manifolds

We revisit the reduction of type II supergravity on SU(3) structure manifolds, conjectured to lead to gauged N=2 supergravity in 4 dimensions. The reduction proceeds by expanding the invariant 2- and 3-forms of the SU(3) structure as well as the gauge potentials of the type II theory in the same set of forms, the analogues of harmonic forms in the case of Calabi-Yau reductions. By focussing on the metric sector, we arrive at a list of constraints these expansion forms should satisfy to yield a base point independent reduction. Identifying these constraints is a first step towards a first-principles reduction of type II on SU(3) structure manifolds.Comment: 20 pages; v2: condition (2.13old) on expansion forms weakened, replaced by (2.13new), (2.14new

Gauging the Heisenberg algebra of special quaternionic manifolds

We show that in N=2 supergravity, with a special quaternionic manifold of (quaternionic) dimension h_1+1 and in the presence of h_2 vector multiplets, a h_2+1 dimensional abelian algebra, intersecting the 2h_1+3 dimensional Heisenberg algebra of quaternionic isometries, can be gauged provided the h_2+1 symplectic charge--vectors V_I, have vanishing symplectic invariant scalar product V_I X V_J=0. For compactifications on Calabi--Yau three--folds with Hodge numbers (h_1,h_2) such condition generalizes the half--flatness condition as used in the recent literature. We also discuss non--abelian extensions of the above gaugings and their consistency conditions.Comment: 9 pages, LaTe

Free-Boundary Dynamics in Elasto-plastic Amorphous Solids: The Circular Hole Problem

We develop an athermal shear-transformation-zone (STZ) theory of plastic deformation in spatially inhomogeneous, amorphous solids. Our ultimate goal is to describe the dynamics of the boundaries of voids or cracks in such systems when they are subjected to remote, time-dependent tractions. The theory is illustrated here for the case of a circular hole in an infinite two-dimensional plate, a highly symmetric situation that allows us to solve much of the problem analytically. In spite of its special symmetry, this example contains many general features of systems in which stress is concentrated near free boundaries and deforms them irreversibly. We depart from conventional treatments of such problems in two ways. First, the STZ analysis allows us to keep track of spatially heterogeneous, internal state variables such as the effective disorder temperature, which determines plastic response to subsequent loading. Second, we subject the system to stress pulses of finite duration, and therefore are able to observe elasto-plastic response during both loading and unloading. We compute the final deformations and residual stresses produced by these stress pulses. Looking toward more general applications of these results, we examine the possibility of constructing a boundary-layer theory that might be useful in less symmetric situations.Comment: 30 pages (preprint format), 9 figure

N=2 Supersymmetric Scalar-Tensor Couplings

We determine the general coupling of a system of scalars and antisymmetric tensors, with at most two derivatives and undeformed gauge transformations, for both rigid and local N=2 supersymmetry in four-dimensional spacetime. Our results cover interactions of hyper, tensor and double-tensor multiplets and apply among others to Calabi-Yau threefold compactifications of Type II supergravities. As an example, we give the complete Lagrangian and supersymmetry transformation rules of the double-tensor multiplet dual to the universal hypermultiplet.Comment: 23 pages, LaTeX2e with amsmath.sty; v2: corrected typos and added referenc

Scalar potential for the gauged Heisenberg algebra and a non-polynomial antisymmetric tensor theory

We study some issues related to the effective theory of Calabi-Yau compactifications with fluxes in Type II theories. At first the scalar potential for a generic electric abelian gauging of the Heisenberg algebra, underlying all possible gaugings of RR isometries, is presented and shown to exhibit, in some circumstances, a "dual'' no-scale structure under the interchange of hypermultiplets and vector multiplets. Subsequently a new setting of such theories, when all RR scalars are dualized into antisymmetric tensors, is discussed. This formulation falls in the class of non-polynomial tensor theories considered long ago by Freedman and Townsend and it may be relevant for the introduction of both electric and magnetic charges.Comment: 11 pages LaTe

Heterotic-type IIA duality with fluxes

In this paper we study a possible non-perturbative dual of the heterotic string compactified on K3 x T^2 in the presence of background fluxes. We show that type IIA string theory compactified on manifolds with SU(3) structure can account for a subset of the possible heterotic fluxes. This extends our previous analysis to a case of a non-perturbative duality with fluxes.Comment: 26 pages, minor corrections; version to appear in JHE