Mechanically alloyed magnesium-based materials For hydrogen storage

Mechanical alloying is very promising technique for fabrication of hydrogen storage materials possessing good hydriding properties. Magnesium and magnesium-based alloys are attractive from hydrogen capacity point of view, but the kinetics of hydridingdehydriding of magnesium are not sufficiently fast even at elevated temperature. Moreover, the theoretical hydrogen capacity is never achieved in practice. In this work, various approaches to improving hydrogen storage properties of magnesium-based materials with the help of mechanical alloying are discussed and some experimental results illustrate the possibility of each approach. It is demonstrated that improving the hydrogen storage properties of known hydrogen absorbing materials is possible by affecting their structure, morphology, surface properties and so on, using mechanical activation and mechanical alloying with various types of additives. It is possible to search for new hydrogen absorbing materials by means of mechanochemical fabrication of metastable composites of components very different in nature including thermodynamically immiscible ones. These composites may possess very interesting hydrogen storage properties and serve as precursors for the synthesis of new phases. Direct synthesis of metastable intermetallic compounds or hydrided phases in the course of mechanical alloying also opens opportunities to obtain materials promising for hydrogen storage

Static and dynamic responses to hyperoxia of normal placenta across gestation with T2*-weighted sequences

OBJECTIVES: T2*-weighted sequences have been identified as non-invasive tools to study the placental oxygenation in-vivo. This study aims to investigate both static and dynamic responses to hyperoxia of the normal placenta across gestation.METHODS: We conducted a single-center prospective study including 52 uncomplicated pregnancies. Two T2*-weighted sequences were performed: T2*-relaxometry was performed before and after maternal hyperoxia. The histogram distribution of T2* values was assessed by fitting a gamma distribution as T2*~Γ(αβ). A dynamic acquisition (BOLD protocol) was also performed before and during oxygen supply, until placental oxygen saturation. The signal change over time was modeled using a sigmoid function, used to determine the intensity of enhancement (∆BOLD,%), a temporal variation coefficient (λ,min -1 , controlling the slope of the curve), and the maximal steepness (Vmax, ∆BOLD.min -1 ) of placental enhancement. RESULTS: The histogram analysis of the T2* values in normoxia showed a whole-placenta variation, with a decreasing linear trend in the mean T2* value (R= -0.83, 95% CI [-0.9, -0.71], p&lt;0.001) along with a more peaked and narrower distribution of T2* values across gestation. After maternal hyperoxia, the mean T2* ratios (mean T2* hyperoxia / mean T2* baseline ) were positively correlated with gestational age, while the other histogram parameters remained stable, suggesting a translation of the histogram towards higher values with a similar aspect. The ∆BOLD showed a non-linear increase across gestation. Conversely, the λ(min -1 ) parameter, showed an inverted trend across gestation, with a significantly weaker correlation (R = -0.33, 95% CI [-0.58, -0.02], p=0.04, R 2 = 0.1). As a combination of ∆BOLD and λ, the changes in Vmax throughout gestation were mainly influenced by the changes in ∆BOLD and resulted in a positive non-linear correlation with gestational age. CONCLUSION: Our results suggest that the decrease in the T2* placental signal over gestation does not reflect a dysfunction. The BOLD effect, representative of a free-diffusion model of oxygenation, highlights the growing differences in oxygen saturation between mother and fetus across gestation (∆BOLD), and placental permeability to oxygen (λ). This article is protected by copyright. All rights reserved.</p

Complexity and robustness of the flavonoid transcriptional regulatory network revealed by comprehensive analyses of MYB-bHLH-WDR complexes and their targets in Arabidopsis seed.

In Arabidopsis thaliana, proanthocyanidins (PAs) accumulate in the innermost cell layer of the seed coat (i.e. endothelium, chalaza and micropyle). The expression of the biosynthetic genes involved relies on the transcriptional activity of R2R3-MYB and basic helix-loop-helix (bHLH) proteins which form ternary complexes (\u27MBW\u27) with TRANSPARENT TESTA GLABRA1 (TTG1) (WD repeat protein). The identification of the direct targets and the determination of the nature and spatio-temporal activity of these MBW complexes are essential steps towards a comprehensive understanding of the transcriptional mechanisms that control flavonoid biosynthesis. In this study, various molecular, genetic and biochemical approaches were used. Here, we have demonstrated that, of the 12 studied genes of the pathway, only dihydroflavonol-4-reductase (DFR), leucoanthocyanidin dioxygenase (LDOX), BANYULS (BAN), TRANSPARENT TESTA 19 (TT19), TT12 and H(+) -ATPase isoform 10 (AHA10) are direct targets of the MBW complexes. Interestingly, although the TT2-TT8-TTG1 complex plays the major role in developing seeds, three additional MBW complexes (i.e. MYB5-TT8-TTG1, TT2-EGL3-TTG1 and TT2-GL3-TTG1) were also shown to be involved, in a tissue-specific manner. Finally, a minimal promoter was identified for each of the target genes of the MBW complexes. Altogether, by answering fundamental questions and by demonstrating or invalidating previously made hypotheses, this study provides a new and comprehensive view of the transcriptional regulatory mechanisms controlling PA and anthocyanin biosynthesis in Arabidopsis

Development of a mathematical model for predicting electrically elicited quadriceps femoris muscle forces during isovelocity knee joint motion

<p>Abstract</p> <p>Background</p> <p>Direct electrical activation of skeletal muscles of patients with upper motor neuron lesions can restore functional movements, such as standing or walking. Because responses to electrical stimulation are highly nonlinear and time varying, accurate control of muscles to produce functional movements is very difficult. Accurate and predictive mathematical models can facilitate the design of stimulation patterns and control strategies that will produce the desired force and motion. In the present study, we build upon our previous isometric model to capture the effects of constant angular velocity on the forces produced during electrically elicited concentric contractions of healthy human quadriceps femoris muscle. Modelling the isovelocity condition is important because it will enable us to understand how our model behaves under the relatively simple condition of constant velocity and will enable us to better understand the interactions of muscle length, limb velocity, and stimulation pattern on the force produced by the muscle.</p> <p>Methods</p> <p>An additional term was introduced into our previous isometric model to predict the force responses during constant velocity limb motion. Ten healthy subjects were recruited for the study. Using a KinCom dynamometer, isometric and isovelocity force data were collected from the human quadriceps femoris muscle in response to a wide range of stimulation frequencies and patterns. % error, linear regression trend lines, and paired t-tests were used to test how well the model predicted the experimental forces. In addition, sensitivity analysis was performed using Fourier Amplitude Sensitivity Test to obtain a measure of the sensitivity of our model's output to changes in model parameters.</p> <p>Results</p> <p>Percentage RMS errors between modelled and experimental forces determined for each subject at each stimulation pattern and velocity showed that the errors were in general less than 20%. The coefficients of determination between the measured and predicted forces show that the model accounted for ~86% and ~85% of the variances in the measured force-time integrals and peak forces, respectively.</p> <p>Conclusion</p> <p>The range of predictive abilities of the isovelocity model in response to changes in muscle length, velocity, and stimulation frequency for each individual make it ideal for dynamic applications like FES cycling.</p

The relation between neuromechanical parameters and Ashworth score in stroke patients

Quantifying increased joint resistance into its contributing factors i.e. stiffness and viscosity ("hypertonia") and stretch reflexes ("hyperreflexia") is important in stroke rehabilitation. Existing clinical tests, such as the Ashworth Score, do not permit discrimination between underlying tissue and reflexive (neural) properties. We propose an instrumented identification paradigm for early and tailor made interventions.BioMechanical EngineeringMechanical, Maritime and Materials Engineerin

Detection of early seeding of Richter transformation in chronic lymphocytic leukemia

Richter transformation (RT) is a paradigmatic evolution of chronic lymphocytic leukemia (CLL) into a very aggressive large B cell lymphoma conferring a dismal prognosis. The mechanisms driving RT remain largely unknown. We characterized the whole genome, epigenome and transcriptome, combined with single-cell DNA/RNA-sequencing analyses and functional experiments, of 19 cases of CLL developing RT. Studying 54 longitudinal samples covering up to 19 years of disease course, we uncovered minute subclones carrying genomic, immunogenetic and transcriptomic features of RT cells already at CLL diagnosis, which were dormant for up to 19 years before transformation. We also identified new driver alterations, discovered a new mutational signature (SBS-RT), recognized an oxidative phosphorylation (OXPHOS)high-B cell receptor (BCR)low-signaling transcriptional axis in RT and showed that OXPHOS inhibition reduces the proliferation of RT cells. These findings demonstrate the early seeding of subclones driving advanced stages of cancer evolution and uncover potential therapeutic targets for RT