1,035 research outputs found
Heat Conduction Process on Community Networks as a Recommendation Model
Using heat conduction mechanism on a social network we develop a systematic
method to predict missing values as recommendations. This method can treat very
large matrices that are typical of internet communities. In particular, with an
innovative, exact formulation that accommodates arbitrary boundary condition,
our method is easy to use in real applications. The performance is assessed by
comparing with traditional recommendation methods using real data.Comment: 4 pages, 2 figure
Local Environment of Ferromagnetically Ordered Mn in Epitaxial InMnAs
The magnetic properties of the ferromagnetic semiconductor In0.98Mn0.02As
were characterized by x-ray absorption spectroscopy and x-ray magnetic circular
dichroism. The Mn exhibits an atomic-like L2,3 absorption spectrum that
indicates that the 3d states are highly localized. In addition, a large
dichroism at the Mn L2,3 edge was observed from 5-300 K at an applied field of
2T. A calculated spectrum assuming atomic Mn2+ yields the best agreement with
the experimental InMnAs spectrum. A comparison of the dichroism spectra of MnAs
and InMnAs show clear differences suggesting that the ferromagnetism observed
in InMnAs is not due to hexagonal MnAs clusters. The temperature dependence of
the dichroism indicates the presence of two ferromagnetic species, one with a
transition temperature of 30 K and another with a transition temperature in
excess of 300 K. The dichroism spectra are consistent with the assignment of
the low temperature species to random substitutional Mn and the high
temperature species to Mn near-neighbor pairs.Comment: 10 pages, 4 figures, accepted by Applied Physics Letter
Ferromagnetism in (In,Mn)As Diluted Magnetic Semiconductor Thin Films Grown by Metalorganic Vapor Phase Epitaxy
In1-xMnxAs diluted magnetic semiconductor (DMS) thin films have been grown
using metalorganic vapor phase epitaxy (MOVPE).
Tricarbonyl(methylcyclopentadienyl)manganese was used as the Mn source.
Nominally single-phase, epitaxial films were achieved with Mn content as high
as x=0.14 using growth temperatures Tg>475 C. For lower growth temperatures and
higher Mn concentrations, nanometer scale MnAs precipitates were detected
within the In1-xMnxAs matrix. Magnetic properties of the films were
investigated using a superconducting quantum interference device (SQUID)
magnetometer. Room-temperature ferromagnetic order was observed in a sample
with x=0.1. Magnetization measurements indicated a Curie temperature of 333 K
and a room-temperature saturation magnetization of 49 emu/cm^3. The remnant
magnetization and the coercive field were small, with values of 10 emu/cm^3 and
400 Oe, respectively. A mechanism for this high-temperature ferromagnetism is
discussed in light of the recent theory based on the formation of small
clusters of a few magnetic atoms.Comment: 5 pages, 5 figures, accepted for publication in JVST
Transient down-regulation of beta1 integrin subtypes on kidney carcinoma cells is induced by mechanical contact with endothelial cell membranes
Adhesion molecules of the integrin beta1 family are thought to be involved in the malignant progression renal cell carcinoma (RCC). Still, it is not clear how they contribute to this process. Since the hematogenous phase of tumour dissemination is the rate-limiting step in the metastatic process, we explored beta1 integrin alterations on several RCC cell lines (A498, Caki1, KTC26) before and after contacting vascular endothelium in a tumour-endothelium (HUVEC) co-culture assay. Notably, alpha2, alpha3 and alpha5 integrins became down-regulated immediately after the tumour cells attached to HUVEC, followed by re-expression shortly thereafter. Integrin down-regulation on RCC cells was caused by direct contact with endothelial cells, since the isolated endothelial membrane fragments but not the cell culture supernatant contributed to the observed effects. Integrin loss was accompanied by a reduced focal adhesion kinase (FAK) expression, FAK activity and diminished binding of tumour cells to matrix proteins. Furthermore, intracellular signalling proteins RCC cells were altered in the presence of HUVEC membrane fragments, in particular 14-3-3 epsilon, ERK2, PKCdelta, PKCepsilon and RACK1, which are involved in regulating tumour cell motility. We, therefore, speculate that contact of RCC cells with the vascular endothelium converts integrin-dependent adhesion to integrin-independent cell movement. The process of dynamic integrin regulation may be an important part in tumour cell migration strategy, switching the cells from being adhesive to becoming motile and invasive
Antimony doping of Si layers grown by solid-phase epitaxy
We report here that layers of Si formed by solid-phase epitaxial growth (SPEG) can be doped intentionally. The sample consists initially of an upper layer of amorphous Si (~1 µm thick), a very thin intermediate layer of Sb (nominally 5 Å), and a thin lower layer of Pd (~500 Å), all electron-gun deposited on top of a single-crystal substrate (1–10 Ω cm, p type, orientation). After a heating cycle which induces epitaxial growth, electrically active Sb atoms are incorporated into the SPEG layer, as shown by the following facts: (a) the SPEG layer forms a p-n junction against the p-type substrate, (b) the Hall effect indicates strong n-type conduction of the layer, and (c) Auger electron spectra reveal the presence of Sb in the layer
A toolkit of mechanism and context independent widgets
Most human-computer interfaces are designed to run on a static platform (e.g. a workstation with a monitor) in a static environment (e.g. an office). However, with mobile devices becoming ubiquitous and capable of running applications similar to those found on static devices, it is no longer valid to design static interfaces. This paper describes a user-interface architecture which allows interactors to be flexible about the way they are presented. This flexibility is defined by the different input and output mechanisms used. An interactor may use different mechanisms depending upon their suitability in the current context, user preference and the resources available for presentation using that mechanism
Interaction of Al layers with polycrystalline Si
Auger electron spectroscopy, MeV 4He + backscattering spectrometry and scanning electron microscopy have been used to investigate interactions between Al films and polycrystalline layers of CVD Si deposited on SiO2. Depth profiling techniques showed that intermixing of the Al and Si occurred in the 400–560 °C temperature range (i.e., below the eutectic). Dissolution of the poly Si into the Al film occurs followed by nucleation and growth of Si crystallites in the Al film. The morphology of the final structure depends on the relative thicknesses of the as-deposited Al and Si layers. In the case of the original Al thickness being greater than that of the Si, the Si forms large precipitates in the Al matrix. For Al layers thinner than those of the Si, a nearly continuous Si film is formed on the outer surface. The thickness of this final Si film is approximately that of the original Al layer. The remaining Si and the Al form a two-phase layer between the outer Si film and the SiO2 substrate
Painting the ideal home: using art to express visions of technologically supported independent living for older people in North East England
This paper describes the investigation of the development of future technological products to support older people in everyday living through the agency of a community art group. Recent research has identified a number of challenges facing designers seeking to use traditional participatory design approaches to gather technology requirements data from older people. Here, a project is described that sought to get a group of older people to think creatively about their needs and desires for technological support through the medium of paint. The artistic expression technique described in this article allowed the identification of issues that had also been found by previous research that used a range of different techniques. This indicates that the approach shows promise, as it allows information to be gathered in an environment that is comfortable and familiar using methods already known by the participants and which they find enjoyable. It provides a complement (or possible alternative) to standard protocols and has the potential benefit of extracting even richer information as the primary task for participants is enjoyable in its own right and is not associated with an interrogative process. Furthermore, it is argued that some of the key risks of traditional approaches are lessened or removed by the naturalistic setting of this approach
Understanding concurrent earcons: applying auditory scene analysis principles to concurrent earcon recognition
Two investigations into the identification of concurrently presented, structured sounds, called earcons were carried out. One of the experiments investigated how varying the number of concurrently presented earcons affected their identification. It was found that varying the number had a significant effect on the proportion of earcons identified. Reducing the number of concurrently presented earcons lead to a general increase in the proportion of presented earcons successfully identified. The second experiment investigated how modifying the earcons and their presentation, using techniques influenced by auditory scene analysis, affected earcon identification. It was found that both modifying the earcons such that each was presented with a unique timbre, and altering their presentation such that there was a 300 ms onset-to-onset time delay between each earcon were found to significantly increase identification. Guidelines were drawn from this work to assist future interface designers when incorporating concurrently presented earcons
- …