19,522 research outputs found
Identification and correction of water velocity measurement errors associated with ultrasonic Doppler flow monitoring
Ultrasonic Doppler flow monitoring (UDFM) is used to measure water flow in pipes and channels. However, a lack of scattering particles and signal noise can cause velocity errors, particularly for smaller discharges and surface water (âcleanâ) flows. A post-processing methodology is presented that identifies and corrects these errors, maximising the value of existing data. Test criteria are used to identify errors. The error correction procedure defines depth-velocity relationships from cleaned âtraining dataâ representing the range of flow conditions (including backed up) and uses these relationships to automatically replace erroneous velocities. UDFM velocity errors have been successfully identified and corrected in example applications. Routine use allows early identification of changes in instrument or site behaviour. The methodology is practical, consistent and updateable. This is a significant advancement on previous methods for correcting velocity errors, improving the applicability of UDFM
Fluid mechanics of nodal flow due to embryonic primary cilia
Breaking of leftâright symmetry is crucial in vertebrate development. The role of cilia-driven flow has been the subject of many recent publications, but the underlying mechanisms remain controversial. At approximately 8 days post-fertilization, after the establishment of the dorsalâventral and anteriorâposterior axes, a depressed structure is found on the ventral side of mouse embryos, termed the ventral node. Within the node, âwhirlingâ primary cilia, tilted towards the posterior, drive a flow implicated in the initial leftâright signalling asymmetry. However, the underlying fluid mechanics have not been fully and correctly explained until recently and accurate characterization is required in determining how the flow triggers the downstream signalling cascades. Using the approximation of resistive force theory, we show how the flow is produced and calculate the optimal configuration to cause maximum flow, showing excellent agreement with in vitro measurements and numerical simulation, and paralleling recent analogue experiments. By calculating numerical solutions of the slender body theory equations, we present time-dependent physically based fluid dynamics simulations of particle pathlines in flows generated by large arrays of beating cilia, showing the far-field radial streamlines predicted by the theory
Mathematical modelling of cilia driven transport of biological fluids
Cilia-driven flow occurs in the airway surface liquid, in the female and male reproductive tracts and enables symmetry-breaking in the embryonic node. Viscoelastic rheology is found in healthy states in some systems, whereas in others may characterise disease, motivating the development of mathematical models that take this effect into account. We derive the fundamental solution for linear viscoelastic flow, which is subsequently used as a basis for slender-body theory. Our numerical algorithm allows efficient computation of three-dimensional time-dependent flow, bending moments, power and particle transport. We apply the model to the large-amplitude motion of a single cilium in a linear Maxwell liquid. A relatively short relaxation time of just 0.032 times the beat period significantly reduces forces, bending moments, power and particle transport, the last variable exhibiting exponential decay with relaxation time. A test particle is propelled approximately one-fifth as quickly along the direction of cilia beating for scaled relaxation time 0.032 as in the Newtonian case, and mean volume flow is abolished, emphasizing the sensitivity of cilia function to fluid rheology. These results may have implications for flow in the airways, where the transition from Newtonian to viscoelastic rheology in the peri-ciliary fluid may reduce clearance
Investigation of variables in turbine erosion, influence of aerodynamic and geometric parameters
Influence of aerodynamic and geometric parameters in turbine erosio
Recommended from our members
Methyl chloride and the U.S. cigarette.
Various brands and types of cigarettes were purchased at retail locations in southern California. Volatile gas samples were analyzed using multicolumn/multidetector gas chromatography. Results showed methyl chloride (CH(3)Cl) levels as much as four orders of magnitude higher than typical urban levels, about 30-500 ppmv (1.5-5.3 mg/cigarette), compared with about 500 pptv in urban air. The concentration of CH(3)Cl correlated well with the levels of both CO (r (2) = 0.63) and CO(2) (r (2) = 0.77), showing the link between CH(3)Cl and combustion. In some brands, CH(3)Cl levels were well above the U.S. Environmental Protection Agency's maximum exposure limit of 200 ppmv. Light branded cigarettes tended to have higher CH(3)Cl levels than the heavier and filtered brands, possibly showing the dependence of cigarette packing on CH(3)Cl production. In addition, CH(3)Cl emitted from cigarette smoke may prove to be an important anthropogenic source of CH(3)Cl in the United States, at about 5%
A METHOD FOR DETERMINING RANCH PROFIT PROBABILITIES WHEN LIVESTOCK YIELDS ARE NORMALLY DISTRIBUTED
Data on net turnoff for small, medium-sized and large cow-calf and small and large size yearling ranches were tested for normality using the Shapiro - Wilk test. The yield data examined were accepted as normally distributed at the alpha = .10 level. The probability of profit for each type of ranch was assessed using normal curve techniques for nine different cost-price alternatives and weather conditions. Yearling cattle ranchers had higher profit probabilities than cow-calf ranchers. Prices received had more influence on profit probabilities than weather conditions.Livestock Production/Industries,
A viscoelastic traction layer model of mucociliary flow
A new mathematical model of the transport of mucus and periciliary liquid (PCL) in the airways by cilia is presented. Mucus is represented by a linearly viscoelastic fluid, the mat of cilia is modelled as an âactive porous medium.â The propulsive effect of the cilia is modelled by a time-dependent force acting in a shear-thinned âtraction layerâ between the mucus and the PCL. The effects of surface and interface tension are modelled by constraining the mucus free surface and mucusâPCL interface to be flat. It is assumed that the epithelium is impermeable to fluid. Using Fourier series, the system is converted into ODEs and solved numerically. We calculate values for mean mucus speed close to those observed by Matsui et~al. [{J. Clin. Invest.}, 102(6):1125â1131, 1998], (~40 ÎŒmsâ1). We obtain more detail regarding the dynamics of the flow and the nonlinear relationships between physical parameters in healthy and diseased states than in previously published models. Pressure gradients in the PCL caused by interface and surface tension are vital to ensuring efficient transport of mucus, and the role of the mucusâPCL interface appears to be to support such pressure gradients, ensuring efficient transport. Mean transport of PCL is found to be very small, consistent with previous analyses, providing insight into theories regarding the normal tonicity of PCL
Frustration effects in magnetic molecules
By means of exact diagonalization we study the ground-state and the
low-temperature physics of the Heisenberg antiferromagnet on the cuboctahedron
and the icosidodecahedron. Both are frustrated magnetic polytopes and
correspond to the arrangement of magnetic atoms in the magnetic molecules
Cu12La8 and Mo72Fe30. The interplay of strong quantum fluctuations and
frustration influences the ground state spin correlations drastically and leads
to an interesting magnetization process at low temperatures. Furthermore the
frustration yields low-lying non-magnetic excitations resulting in an extra
low-temperature peak in the specific heat.Comment: 4 pages, 7 figure
Experimental determination of dipole moments for molecular ions: Improved measurements for ArH^+
An improved value for the dipole moment of ArH^+ has been obtained from new measurements of the rotational g factors of ArH^+ and ArD^+ made with tunable farâIR laser spectroscopy. Systematic errors present in earlier measurements have been eliminated. The new result (ÎŒ=3.0±0.6 D) is slightly higher than the ab initio value of Rosmus (2.2 D) at the 2Ï limits of precision
- âŠ