Numerical simulations of multiple scattering of the f−f-mode by flux tubes

We use numerial simulations to study the absorption and phase shift of surface-gravity waves caused by groups of magnetic flux tubes. The dependence of the scattering coefficients with the distance between the tubes and their positions is analyzed for several cases with two or three flux tubes embedded in a quiet Sun atmosphere. The results are compared with those obtained neglecting completely or partially multiple scattering effects. We show that multiple scattering has a significant impact on the absorption measurements and tends to reduce the phase shift. We also consider more general cases of ensembles of randomly distributed flux tubes, and we have evaluated the effects on the scattering measurements of changing the number of tubes included in the bundle and the average distance between flux tubes. We find that for the longest wavelength incoming waves multiple scattering enhances the absorption, and its efficiency increases with the number of flux tubes and the reduction of the distance between them.Comment: Accepted for publication in The Astrophysical Journa

Evaluation of the capability of local helioseismology to discern between monolithic and spaghetti sunspot models

The helioseismic properties of the wave scattering generated by monolithic and spaghetti sunspots are analyzed by means of numerical simulations. In these computations, an incident f or p1 mode travels through the sunspot model, which produces absorption and phase shift of the waves. The scattering is studied by inspecting the wavefield, computing travel-time shifts, and performing Fourier-Hankel analysis. The comparison between the results obtained for both sunspot models reveals that the differences in the absorption coefficient can be detected above noise level. The spaghetti model produces an steep increase of the phase shift with the degree of the mode at short wavelengths, while mode-mixing is more efficient for the monolithic model. These results provide a clue for what to look for in solar observations to discern the constitution of sunspots between the proposed monolithic and spaghetti models.Comment: Accepted for publication in The Astrophysical Journa

Archive Box - Series One: Matters in relation to Aborigines Act (1886)

24 May 1930 The Board for the Protection of the Aborigines reports that for the month ending April 1930 no additional expenditure was outlaid by the Board with the exception of the purchase of 100 yards of superior fencing wire. The ration inventory for the natives and half castes recognised within the relevant clauses of the Act (1886) did not exceed previously stated amounts allocated and attended to within that Act (1886)

Helioseismic holography of simulated sunspots: magnetic and thermal contributions to travel times

Wave propagation through sunspots involves conversion between waves of acoustic and magnetic character. In addition, the thermal structure of sunspots is very different than that of the quiet Sun. As a consequence, the interpretation of local helioseismic measurements of sunspots has long been a challenge. With the aim of understanding these measurements, we carry out numerical simulations of wave propagation through sunspots. Helioseismic holography measurements made from the resulting simulated wavefields show qualitative agreement with observations of real sunspots. We use additional numerical experiments to determine, separately, the influence of the thermal structure of the sunspot and the direct effect of the sunspot magnetic field. We use the ray approximation to show that the travel-time shifts in the thermal (non-magnetic) sunspot model are primarily produced by changes in the wave path due to the Wilson depression rather than variations in the wave speed. This shows that inversions for the subsurface structure of sunspots must account for local changes in the density. In some ranges of horizontal phase speed and frequency there is agreement (within the noise level in the simulations) between the travel times measured in the full magnetic sunspot model and the thermal model. If this conclusion proves to be robust for a wide range of models, it would suggest a path towards inversions for sunspot structure.Comment: Accepted for publication in The Astrophysical Journa

Time-distance helioseismology: Sensitivity of f-mode travel times to flows

Time-distance helioseismology has shown that f-mode travel times contain information about horizontal flows in the Sun. The purpose of this study is to provide a simple interpretation of these travel times. We study the interaction of surface-gravity waves with horizontal flows in an incompressible, plane-parallel solar atmosphere. We show that for uniform flows less than roughly 250 m s$^{-1}$, the travel-time shifts are linear in the flow amplitude. For stronger flows, perturbation theory up to third order is needed to model waveforms. The case of small-amplitude spatially-varying flows is treated using the first-order Born approximation. We derive two-dimensional Fr\'{e}chet kernels that give the sensitivity of travel-time shifts to local flows. We show that the effect of flows on travel times depends on wave damping and on the direction from which the observations are made. The main physical effect is the advection of the waves by the flow rather than the advection of wave sources or the effect of flows on wave damping. We compare the two-dimensional sensitivity kernels with simplified three-dimensional kernels that only account for wave advection and assume a vertical line of sight. We find that the three-dimensional f-mode kernels approximately separate in the horizontal and vertical coordinates, with the horizontal variations given by the simplified two-dimensional kernels. This consistency between quite different models gives us confidence in the usefulness of these kernels for interpreting quiet-Sun observations.Comment: 34 pages, accepted to Astrophysical Journa

Shape as a measure of weapon standardisation: From metric to geometric morphometric analysis of the Iron Age ‘Havor’ lance from Southern Scandinavia

© 2018 Traditionally, standardisation of manufacture has been investigated using metrics (e.g. length and width) and compared in terms of the coefficient of variation (CV). This paper argues that standardisation should not only be investigated via metrics, but also in terms of shape. An Iron Age lance head type (‘2018;Havor‘2019;), known from three main weapon depositions in Southern Scandinavia, is used as a case study to test the effectiveness of shape analysis against traditional metric analysis for investigating standardisation. Geometric morphometric (GMM) analysis is used to measure the overall shape variation and to test shape difference of the same lance type coming from three different archaeological sites. The results demonstrate GMM to complement the traditional metric approach. Whilst metric measurements offer insights into Havor lance standardisation, the results from multivariate analysis of GMM data provides further explanation about the source of variation in terms of shape, including an assessment of object symmetry. This paper represents the first known methodological application of GMM analysis to iron weapons and demonstrates it to be an effective method for studying product standardisation in terms of shape variation

Comparison of spatial domain optimal trade-off maximum average correlation height (OT-MACH) filter with scale invariant feature transform (SIFT) using images with poor contrast and large illumination gradient

A spatial domain optimal trade-off Maximum Average Correlation Height (OT-MACH) filter has been previously developed and shown to have advantages over frequency domain implementations in that it can be made locally adaptive to spatial variations in the input image background clutter and normalised for local intensity changes. In this paper we compare the performance of the spatial domain (SPOT-MACH) filter to the widely applied data driven technique known as the Scale Invariant Feature Transform (SIFT). The SPOT-MACH filter is shown to provide more robust recognition performance than the SIFT technique for demanding images such as scenes in which there are large illumination gradients. The SIFT method depends on reliable local edge-based feature detection over large regions of the image plane which is compromised in some of the demanding images we examined for this work. The disadvantage of the SPOTMACH filter is its numerically intensive nature since it is template based and is implemented in the spatial domain. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only

Fascicles and the interfascicular matrix show adaptation for fatigue resistance in energy storing tendons

Tendon is composed of rope-like fascicles, bound together by interfascicular matrix (IFM). Our previous work shows that the IFM is critical for tendon function, facilitating sliding between fascicles to allow tendons to stretch. This function is particularly important in energy storing tendons, which experience extremely high strains during exercise, and therefore require the capacity for considerable inter-fascicular sliding and recoil. This capacity is not required in positional tendons. Whilst we have previously described the quasi-static properties of the IFM, the fatigue resistance of the IFM in functionally distinct tendons remains unknown. We therefore tested the hypothesis that fascicles and IFM in the energy storing equine superficial digital flexor tendon (SDFT) are more fatigue resistant than those in the positional common digital extensor tendon (CDET). Fascicles and IFM from both tendon types were subjected to cyclic fatigue testing until failure, and mechanical properties were calculated. The results demonstrated that both fascicles and IFM from the energy storing SDFT were able to resist a greater number of cycles before failure than those from the positional CDET. Further, SDFT fascicles and IFM exhibited less hysteresis over the course of testing than their counterparts in the CDET. This is the first study to assess the fatigue resistance of the IFM, demonstrating that IFM has a functional role within tendon and contributes significantly to tendon mechanical properties. These data provide important advances into fully characterising tendon structure-function relationships

Effect of fatigue loading on structure and functional behaviour of fascicles from energy-storing tendons

Tendons can broadly be categorized according to their function: those that act purely to position the limb and those that have an additional function as energy stores. Energy-storing tendons undergo many cycles of large deformations during locomotion, and so must be able to extend and recoil efficiently, rapidly and repeatedly. Our previous work has shown rotation in response to applied strain in fascicles from energy-storing tendons, indicating the presence of helical substructures which may provide greater elasticity and recovery. In the current study, we assessed how preconditioning and fatigue loading affect the ability of fascicles from the energy-storing equine superficial digital flexor tendon to extend and recoil. We hypothesized that preconditioned samples would exhibit changes in microstructural strain response, but would retain their ability to recover. We further hypothesized that fatigue loading would result in sample damage, causing further alterations in extension mechanisms and a significant reduction in sample recovery. The results broadly support these hypotheses: preconditioned samples showed some alterations in microstructural strain response, but were able to recover following the removal of load. However, fatigue loaded samples showed visual evidence of damage and exhibited further alterations in extension mechanisms, characterized by decreased rotation in response to applied strain. This was accompanied by increased hysteresis and decreased recovery. These results suggest that fatigue loading results in a compromised helix substructure, reducing the ability of energy-storing tendons to recoil. A decreased ability to recoil may lead to an impaired response to further loading, potentially increasing the likelihood of injury

Acupuncture for chronic neck pain: a pilot for a randomised controlled trial

Background: Acupuncture is increasingly being used for many conditions including chronic neck pain. However the evidence remains inconclusive, indicating the need for further well-designed research. The aim of this study was to conduct a pilot randomised controlled parallel arm trial, to establish key features required for the design and implementation of a large-scale trial on acupuncture for chronic neck pain. Methods: Patients whose GPs had diagnosed neck pain were recruited from one general practice, and randomised to receive usual GP care only, or acupuncture ( up to 10 treatments over 3 months) as an adjunctive treatment to usual GP care. The primary outcome measure was the Northwick Park Neck Pain Questionnaire (NPQ) at 3 months. The primary analysis was to determine the sample size for the full scale study. Results: Of the 227 patients with neck pain identified from the GP database, 28 (12.3%) consenting patients were eligible to participate in the pilot and 24 (10.5%) were recruited to the trial. Ten patients were randomised to acupuncture, receiving an average of eight treatments from one of four acupuncturists, and 14 were randomised to usual GP care alone. The sample size for the full scale trial was calculated from a clinically meaningful difference of 5% on the NPQ and, from this pilot, an adjusted standard deviation of 15.3%. Assuming 90% power at the 5% significance level, a sample size of 229 would be required in each arm in a large-scale trial when allowing for a loss to follow-up rate of 14%. In order to achieve this sample, one would need to identify patients from databases of GP practices with a total population of 230,000 patients, or approximately 15 GP practices roughly equal in size to the one involved in this study (i.e. 15,694 patients). Conclusion: This pilot study has allowed a number of recommendations to be made to facilitate the design of a large-scale trial, which in turn will help to clarify the existing evidence base on acupuncture for neck pain