A perpendicular graphene/ferromagnet electrode for spintronics

We report on the large-scale integration of graphene layers over a FePd perpendicular magnetic anisotropy (PMA) platform, targeting further downscaling of spin circuits. An L10 FePd ordered alloy showing both high magneto-crystalline anisotropy and a low magnetic damping constant, is deposited by magnetron sputtering. The graphene layer is then grown on top of it by large-scale chemical vapor deposition. A step-by-step study, including structural and magnetic analyses by x-ray diffraction and Kerr microscopy, shows that the measured FePd properties are preserved after the graphene deposition process. This scheme provides a graphene protected perpendicular spin electrode showing resistance to oxidation, atomic flatness, stable crystallinity, and perpendicular magnetic properties. This, in turn, opens the way to the generalization of hybrid 2D-materials on optimized PMA platforms, sustaining the development of spintronics circuits based on perpendicular spin-sources as required, for instance, for perpendicular-magnetic random-access memory schemes

WS2 2D Semiconductor Down to Monolayers by Pulsed-Laser Deposition for Large-Scale Integration in Electronics and Spintronics Circuits

We report on the achievement of a large-scale tungsten disulfide (WS2) 2D semiconducting platform derived by pulsed-laser deposition (PLD) on both insulating substrates (SrTiO3), as required for in-plane semiconductor circuit definition, and ferromagnetic spin sources (Ni), as required for spintronics applications. We show thickness and phase control, with highly homogeneous wafer-scale monolayers observed under certain conditions, as demonstrated by X-ray photoelectron spectroscopy and Raman spectroscopy mappings. Interestingly, growth appears to be dependent on the substrate selection, with a dramatically increased growth rate on Ni substrates. We show that this 2D-semiconductor integration protocol preserves the interface integrity. Illustratively, the WS2/Ni electrode is shown to be resistant to oxidation (even after extended exposure to ambient conditions) and to present tunneling characteristics once integrated into a complete vertical device. Overall, these experiments show that the presented PLD approach used here for WS2 growth is versatile and has a strong potential to accelerate the integration and evaluation of large-scale 2D-semiconductor platforms in electronics and spintronics circuits

Atomic layer deposition of a MgO barrier for a passivated black phosphorus spintronics platform

We demonstrate a stabilized black phosphorus (BP) 2D platform thanks to an ultrathin MgO barrier, as required for spintronic device integration. The in-situ MgO layer deposition is achieved by using a large-scale atomic layer deposition process with high nucleation density. Raman spectroscopy studies show that this layer protects the BP from degradation in ambient conditions, unlocking in particular the possibility to carry out usual lithographic fabrication steps. The resulting MgO/BP stack is then integrated in a device and probed electrically, confirming the tunnel properties of the ultrathin MgO contacts. We believe that this demonstration of a BP material platform passivated with a functional MgO tunnel barrier provides a promising perspective for BP spin transport devices

Stabilizing a graphene platform toward discrete components

© 2016 Author(s).We report on statistical analysis and consistency of electrical performances of devices based on a large scale passivated graphene platform. More than 500 graphene field effect transistors (GFETs) based on graphene grown by chemical vapor deposition and transferred on 4 in. SiO2/Si substrates were fabricated and tested. We characterized the potential of a two-step encapsulation process including an Al2O3 protection layer to avoid graphene contamination during the lithographic process followed by a final Al2O3 passivation layer subsequent to the GFET fabrication. Devices were investigated for occurrence and reproducibility of conductance minimum related to the Dirac point. While no conductance minimum was observed in unpassivated devices, 75% of the passivated transistors exhibited a clear conductance minimum and low hysteresis. The maximum of the device number distribution corresponds to a residual doping below 5 × 1011 cm−2 (0.023 V/nm). This yield shows that GFETs integrating low-doped graphene and exhibiting small hysteresis in the transfer characteristics can be envisaged for discrete components, with even further potential for low power driven electronics.This study was partly funded by the European Union through the projects Grafol (No. 285275) and Graphene Flagship (No. 604391 and Core1 No. 696656)

Dislocation network driven structural relaxation in hematite thin films

Symposium on Nanoscale Tailoring of Defect Structures for Optimized Functional and Multifunctional Oxide Films held at the EMRS 2007, Strasbourg, FRANCE, 2007International audienceUsing surface X-ray diffraction, we investigated 20 nm thick alpha-Fe2O3(0 0 0 1) thin films deposited on alpha-Al2O3(0001) and Pt(111) single crystals. The films were grown in identical conditions by atomic oxygen assisted molecular beam epitaxy techniques. Both substrates offer close lattice parameter misfits. On sapphire an isostructural epitaxial relationship is observed and a 30 degrees in plane rotation of the lattice for Pt(111). The crystalline quality of the film deposited on Pt(111) is much better and contained less parasitic contributions. The improved crystalline quality of alpha-Fe2O3(0001) layers on Pt(111) is attributed to the presence of a very well ordered interfacial dislocation network which is missing when alpha-Al2O3 is used as substrate. (C) 2007 Elsevier B.V. All rights reserved

Thirty Gigahertz Optoelectronic Mixing in Chemical Vapor Deposited Graphene

© 2016 American Chemical Society. The remarkable properties of graphene, such as broadband optical absorption, high carrier mobility, and short photogenerated carrier lifetime, are particularly attractive for high-frequency optoelectronic devices operating at 1.55 μm telecom wavelength. Moreover, the possibility to transfer graphene on a silicon substrate using a complementary metal-oxide-semiconductor-compatible process opens the ability to integrate electronics and optics on a single cost-effective chip. Here, we report an optoelectronic mixer based on chemical vapor-deposited graphene transferred on an oxidized silicon substrate. Our device consists in a coplanar waveguide that integrates a graphene channel, passivated with an atomic layer-deposited Al2O3 film. With this new structure, 30 GHz optoelectronic mixing in commercially available graphene is demonstrated for the first time. In particular, using a 30 GHz intensity-modulated optical signal and a 29.9 GHz electrical signal, we show frequency downconversion to 100 MHz. These results open promising perspectives in the domain of optoelectronics for radar and radio-communication systems

Band-structure spin-filtering in vertical spin valves based on chemical vapor deposited WS2.

We report on spin transport in WS2-based 2D-magnetic tunnel junctions (2D-MTJs), unveiling a band structure spin filtering effect specific to the transition metal dichalcogenides (TMDCs) family. WS2 mono-, bi-, and trilayers are derived by a chemical vapor deposition process and further characterized by Raman spectroscopy, atomic force microscopy (AFM), and photoluminescence spectroscopy. The WS2 layers are then integrated in complete Co/Al2O3/WS2/Co MTJ hybrid spin-valve structures. We make use of a tunnel Co/Al2O3 spin analyzer to probe the extracted spin-polarized current from the WS2/Co interface and its evolution as a function of WS2 layer thicknesses. For monolayer WS2, our technological approach enables the extraction of the largest spin signal reported for a TMDC-based spin valve, corresponding to a spin polarization of PCo/WS2 = 12%. Interestingly, for bi- and trilayer WS2, the spin signal is reversed, which indicates a switch in the mechanism of interfacial spin extraction. With the support of ab initio calculations, we propose a model to address the experimentally measured inversion of the spin polarization based on the change in the WS2 band structure while going from monolayer (direct bandgap) to bilayer (indirect bandgap). These experiments illustrate the rich potential of the families of semiconducting 2D materials for the control of spin currents in 2D-MTJs