Research of Wheat Drying in a Microwave and Combined Filter-microwave Dryer

The aim of the conducted study is to determine kinetics of the complex effect of microwave energy supply and filter drying of the process of water release from the wheat layer. There is offered a combination of MW and filter drying. A special feature of this combination must be its more effectiveness and high speed of water elimination from surface layers of wet seeds and, as a result, the productivity increase of the drying way, decrease of specific energy consumption.There was determined the influence of the specific load of the material, radiator power on processes of microwave and filter-microwave drying of wheat seeds. There were compared microwave, filter-microwave and convective drying of seeds by parameters of specific energy consumption, drying speed.The specific energy consumption at microwave drying of seeds was 4 MJ/kg, at filter-microwave drying 3.8 MJ/kg that is lower than existent convective dryers. The speed of microwave drying changes from 0,5 to 3 %/min, filter-microwave – from 0.3 to 0.7 %/min. The speed is at the level of standard convective dryers.The conducted studies allow to recommend a new combined way of FMW drying of seeds with low energy consumption.Revealed features of heating and drying are possible to be used at developing industrial dryers.The base of experimental data is possible to be used for optimizing and determining effective conditions of MW and FMW drying

DEVELOPMENT OF A CONCEPTUAL MODEL OF A ROBOTIC COMPLEX FOR THE PRODUCTION OF RAVIOLI OF SPECIAL FORMS

The article provides a substantiation of the conceptual model of the production process of special forms of dumplings. It is the first stage in the development of a model of this process as a control object. The purpose of which is to form an objective basis for the development of an effective system for automatic process control. The development of the conceptual model presupposes the specification and description of the properties of control channels and acting disturbances to the level of their mathematical model, which can be implemented in a simulation environment. Problems of identification of the mathematical model of the process of the production of dumplings, i. e. obtaining a mathematical description of processes based on the results of its purposeful experimental research, due to its complexity as a control object.The experimental approach, in this case, gives much more reliable results on the properties of the process. An attempt to obtain such general properties on the basis of experimental data would inevitably lead to the need for very complex and lengthy multifactorial experiments and nontrivial procedures for their processing. But this will leave open the question of the adequacy of the model for those conditions of the process and types of raw materials that were not covered by the experiments. Fundamentally important is the fact that the mathematical model of the process is developed as a model of the control object.Model can be used in two ways. This is due to the fact that in the closed circuits of the SAC, the discrepancy between the models can be considered as a manifestation of uncontrolled coordinate and parametric disturbances. It is in conditions of this kind of disturbances that the SAC must fulfill its functional purpose. The developed mathematical model of the production process of special forms of dumplings will be used by us only in the direction, when it is of great importance not so much quantitative as its qualitative correspondence to the original object

RESEARCH OF WHEAT DRYING IN A MICROWAVE AND COMBINED FILTER-MICROWAVE DRYER

The aim of the conducted study is to determine kinetics of the complex effect of microwave energy supply and filter drying of the process of water release from the wheat layer. There is offered a combination of MW and filter drying. A special feature of this combination must be its more effectiveness and high speed of water elimination from surface layers of wet seeds and, as a result, the productivity increase of the drying way, decrease of specific energy consumption. There was determined the influence of the specific load of the material, radiator power on processes of microwave and filter-microwave drying of wheat seeds. There were compared microwave, filter-microwave and convective drying of seeds by parameters of specific energy consumption, drying speed. The specific energy consumption at microwave drying of seeds was 4 MJ/kg, at filter-microwave drying 3.8 MJ/kg that is lower than existent convective dryers. The speed of microwave drying changes from 0,5 to 3 %/min, filter-microwave – from 0.3 to 0.7 %/min. The speed is at the level of standard convective dryers. The conducted studies allow to recommend a new combined way of FMW drying of seeds with low energy consumption. Revealed features of heating and drying are possible to be used at developing industrial dryers. The base of experimental data is possible to be used for optimizing and determining effective conditions of MW and FMW drying

Investigation of Tribological Properties of Two-Component Bidisperse Epoxy-Polyester Composite Materials for Its Use in the Friction Units of Means of Sea Transport

The tribological properties of complex polymeric materials, which include epoxy and polyester resins, two hardeners and two microdispersed fillers: mica-muscovite, copper (II) oxide, were investigated in the work. The results of the testing of specimens at dry friction and in the lubricant were analyzed. It is proved, that the antifriction properties of the composite depend on its composition, formation technology and testing conditions. It has been experimentally determined, that the material which was tested in the lubricating environment – Im = 0.25–0.30 mg/km, f = 0.03–0.04, differs with the improved indexes of wear rate and friction coefficient. As a result of the analysis of investigated microsurfaces studied by optical and electron microscopy, the phase heterogeneity of the composite material system was identified. It contributes to the reduction of the running-in distance of the specimen, and indicates the uniform distribution of the filler particles on the surface, has been found. The elemental composition of the compound was determined, which indicates the direct involvement of fillers in the process of friction. A change in the ratio of atoms on the specimen surface before and after the test was found. The results of the study of the surface in the phase contrast mode correlate with the results of the data obtained by electron microscopy

BRICS Message From South Africa

The paper features the data obtained from the analysis of a video strip with the help of ELAN 5.4, the free software developed by the experts from Max Planck Institute for Psycholinguistics, the Language Archive, Nijmegen, the Netherlands. The software enables to annotate video and audio strips, describing pauses, the duration of utterances, gestures, pronunciation and other linguistic and extralinguistic factors. The speaker in the video – South African President Cyril Ramaphosa – delivers his official address to the leaders of the 10th BRICS leadership summit in Sandton, Johannesburg on July 26, 2018. BRICS is a powerful link of a global financial architecture. Its main targets are to mobilize resources for sustainable development projects of BRICS and to facilitate the global growth of multilateral and regional financial, educational and industrial institutions. The material and the speaker for the analysis belong to the domain of BRICS top level politics. South Africa was the main host of the leadership summit in 2018. South African President Cyril Ramaphosa in his speech stressed the significance of the fourth industrial revolution highlighted by Professor Klaus Schawb at the World Economic Forum in Davos in 2016. The notion of the revolution appeared in the South African leader's address 7 times. Nevertheless, the authors of the paper see more messages hidden between the lines of the South African President's address. In the paper it is argued that BRICS architecture has a right to be interpreted as an attempt of keeping the world away from further plunging into environmental degradation, the development of critical thinking and innovation among BRICS citizens. The purpose of the paper is to demonstrate the method of pauses analysis to reveal a more complex mixture of speakers' visions. Long pauses are meaningful and extremely informative for discourse analysis. The data may be relevant for discourse analysis experts, political journalists, educators and copywriters

Level densities of heaviest nuclei

The intrinsic level densities of superheavy nuclei in the α-decay chains of 296,298,300120 are calculated using the single-particle spectra obtained with the modified two-center shell model. The role of the shell and pairing effects on the level density as well as their quenching with excitation energy are studied. The extracted level density parameter is expressed as a function of mass number, ground-state shell correction, and excitation energy. The results are compared with the phenomenological values of level density parameters used to calculate the survival of excited heavy nuclei. © 2014 SIF, Springer-Verlag Berlin Heidelberg

Level densities and shell corrections of superheavy nuclei

© Published under licence by IOP Publishing Ltd. The intrinsic level densities of superheavy nuclei in the α-decay chains of 296;298;300120 nuclei are calculated using the single-particle spectra obtained with the modifed two-center shell model. The level density parameters are extracted and compared with their phenomenological values used in the calculations of the survival of excited heavy nuclei. The dependences of the level density parameters on the mass and charge numbers as well as on the ground-state shell corrections are studied