2,731 research outputs found
Vorticity and vortex-core states
The origin of the vortex-core states in s-wave and d_{x^2-y^2}-wave
superconductors is investigated by means of some selected numerical
experiments. By relaxing the self-consistency condition in the Bogoliubov-de
Gennes equations and tuning the order parameter in the core region, it is shown
that the suppression of the superfluid density in the core is not a necessary
condition for the core states to form. This excludes ``potential well'' types
of interpretations for the core states. The topological defect in the phase of
the order parameter, however, plays a crucial role. This observation is
explained by considering the effect of the vortex supercurrent on the
Bogoliubov quasiparticles, and illustrated by comparing conventional vortices
with multiply-quantized vortices and vortex-antivortex pairs. The core states
are also found to be extremely robust against random phase disorder.Comment: REVTeX 4, 11 pages, 8 EPS figure
Gorkov equations for a pseudo-gapped high temperature superconductor
A theory of superconductivity based on the two-body Cooperon propagator is
presented. This theory takes the form of a modified Gorkov equation for the
Green's function and allows one to model the effect of local superconducting
correlations and long range phase fluctuations on the spectral properties of
high temperature superconductors, both above and below Tc. A model is proposed
for the Cooperon propagator, which provides a simple physical picture of the
pseudo-gap phenomenon, as well as new insights into the doping dependence of
the spectral properties. Numerical calculations of the density of states and
spectral functions based on this model are also presented, and compared with
the experimental STM and ARPES data. It is found, in particular, that the
sharpness of the peaks in the density of states is related to the strength and
the range of the superconducting correlations and that the apparent pseudo-gap
in STM and ARPES can be different, although the underlying model is the same.Comment: REVTEX 3.1, 8 pages, 5 EPS figures, submitted to Phys. Rev.
Interplay of the pseudogap and the BCS gap for heteropairs in K-Li mixture
The description of heteropairs like K-Li near and in the
superconducting state requires a fully selfconsistent theory [see Hanai and
Ohashi, Phys. Rev. A 90, 043622 (2014)]. We derive analytic pseudogap Green's
functions for the "normal" and superconducting states from the Luttinger-Ward
theory with the T-matrix in the static separable approximation. The
self-consistency in the closing loop of self-energy has two pronounced effects
on the single-particle spectrum. First, the single-particle excitations decay
before the asymptotic quasiparticle propagation is established, therefore the
normal state is not a Fermi liquid. Second, the pseudogap has a V shape even
for s-wave pairing. The V-shaped pseudogap and the U-shaped BCS gap interfere
resulting in slope breaks of the gap walls and the in-gap states in the density
of states. Various consequences of an incomplete self-consistency are
demonstrated.Comment: Published versio
Effets de facteurs pédoclimatiques sur la composition et l’anatomie du bois de cinq cultivars de saule destinés aux biocarburants
En 2011, cinq (5) cultivars de saules ont été sélectionnés pour leur rendement en biomasse. Ils ont été plantés sur quatre sites de la province du Québec et ont été maintenus selon le protocole de la culture intensive sur courtes rotations (CICR) afin de déterminer leur potentiel pour la bioénergie dans des environnements contrastés. La composition et l’anatomie du bois de ces cultivars ont été caractérisées et comparés en fonction des conditions environnementales caractéristiques de chaque site. La hauteur et le diamètre à la base des plantes diffèrent selon les sites. Ainsi, les cultivars répondent de façon spécifique aux conditions pédoclimatiques dans lesquelles ils sont cultivés. L’effet de l’environnement n’a pas été mis en évidence sur la teneur en lignine des cultivars. Cependant, un effet génotypique a pu être constaté soulignant l’importance de la sélectivité des cultivars. La densité du bois a étonnamment conservé la même hiérarchie génotypique entre les sites. À l’opposé, l’anatomie du bois présente des différences notamment au niveau des caractéristiques des fibres et des vaisseaux. Une forte teneur en polyphénols ainsi que des fibres moins larges et des vaisseaux plus nombreux ont été observés sur le site dont le bois est le plus dense supposant l’effet probable d’un stress abiotique. De plus, deux fois plus de fibres gélatineuses, fibres riches en cellulose, ont été identifiées sur ce site montrant un intérêt pour la production de bioéthanol.In 2011, five (5) willow cultivars were selected for biomass yield. They were planted according to SRC (Short Rotation Coppice) protocol on four sites in Quebec (Canada) to determine their bioenergy potential in contrasting environments. Wood composition and anatomical traits were characterized and compared between both genotypes and environmental growing conditions. Tree height and stem diameter differed between sites, and pedoclimatic conditions more favorable for willow growth were identified. However, each cultivar showed a specific response to its environment. While no significant variation in lignin content was observed between sites, a clonal effect confirms the importance of cultivar selection. Surprisingly, the pattern of genotype variability in stem density was the same on all sites. Wood anatomy differed on fiber and vessel traits between high and low wood density sites, which suggests a probable effect of an abiotic stress. Furthermore, twice as many cellulose-rich G fibers were also found at the most dense site, evidence of potential for use in bioethanol production
A theory of the strain-dependent critical field in Nb3Sn, based on anharmonic phonon generation
We propose a theory to explain the strain dependence of the critical
properties in A15 superconductors. Starting from the strong-coupling formula
for the critical temperature, and assuming that the strain sensitivity stems
mostly from the electron-phonon alpha^2F function, we link the strain
dependence of the critical properties to a widening of alpha^2F. This widening
is attributed to the nonlinear generation of phonons, which takes place in the
anharmonic deformation potential induced by the strain. Based on the theory of
sum- and difference-frequency wave generation in nonlinear media, we obtain an
explicit connection between the widening of alpha^2F and the anharmonic energy.
The resulting model is fit to experimental datasets for Nb3Sn, and the
anharmonic energy extracted from the fits is compared with first-principles
calculations.Comment: 10 pages, 3 figure
Microstructures and Metallographic Characterization of Superalloys
International audienceSuperalloys are metallic alloys with specific microstructures and atoms in solid solution allowing good mechanical and chemical properties at high temperature, typically higher than 1000°C. They present many different types of {matrix-precipitates} combinations which can be characterized at each step of their elaboration, by specifying the chemical compositions and the crystalline network of the phases present. After test on a sample (laboratory scale), or after the deterioration in service of a component leading to its replacement by a new one (industrial scale), the superalloys constituting these pieces are often usefully examined. This aims to specify the changes occurred in their microstructures as well as in their surface or sub-surface, due to the endured thermal, mechanical and chemical solicitations. These characterizations can be simply done using basic low-magnification optical microscopic examinations. Other means such as electronic microscopy and other advanced apparatus may be usefully involved for further investigations. After a brief history about superalloys, an overview of the phenomenological aspects of their mechanical and chemical solicitations during their use at high temperature, the metallographic techniques which are usually employed to characterize them are presented and illustrated in the case of a chosen family of superalloys
High temperature properties of several chromium-containing Co-based alloys reinforced by different types of MC carbides (M=Ta, Nb, Hf and/or Zr)
International audienceFive cast cobalt alloys based on Co-8Ni-30Cr-0.4/0.45C and containing Ta, Nb, Hf and/or Zr were studied by metallography in the as-cast condition and after treatments at 1300°C. The obtained MC carbides were all interdendritic with a eutectic script-like morphology. For similar carbon contents, the HfC carbides are the most developed in the as-cast microstructure and the most stable at 1300°C. As-cast, the TaC carbides are less developed than the former and they tend to become more fractioned and less present in microstructure at 1300°C. The NbC carbides, which have initially the same morphology and the same fraction as TaC, rapidly dissolve at 1300°C. The cobalt alloys containing HfC or TaC are chromia-forming at 1300°C. The NbC-containing alloy catastrophically oxides after only few hours at 1300°C. The average hardness is the highest for the HfC-containing alloy and the lowest for the NbC-containing alloy
Thermogravimetric Study of Oxide Spallation for Chromium-Rich Cast Cobalt-Based and Iron-Based Alloys Oxidized at High Temperature
International audienceDuring temperature cycles, metallic alloys for high temperature applications are usually oxidized with formation of an external protective oxide scale, but they loose it during the cooling. This problem of oxide spallation can be studied by specific tests of cyclic oxidation but first indications can be provided by analyzing the cooling parts of thermo-gravimetry curves. This possibility was studied in this work for simple {Co or Fe}-30 wt.% Cr alloys containing between 0 and 0.8 wt.% of carbon, and for two of these alloys after addition of about 5 wt.% of tantalum. These alloys, elaborated by foundry process, were exposed to oxidation at 1000, 1100 or 1200°C for 50 hours, with recording of their mass gain during heating, isothermal dwell and cooling. The analysis of the cooling part of the thermogravimetry files allowed specifying several data characterizing the spallation of the external oxide, such as the temperature at which the phenomenon begins and the rate with which the mass decreases because of the loss of oxide. Metallographic data about oxidation and spallation were obtained by examination of cross-sections of the oxidized samples. Oxide spallation, characterized by its beginning's temperature and its corresponding mass loss rate, was obviously more severe for the cobalt alloys than for the iron ones, for the carbon-free alloys than for carbides-containing ones and for tantalum-containing alloys than for the tantalum-free ones. Most of these effects were explained
- …