3D Modelling and Printing of Microtonal Flutes

This project explores the potential for 3D modelling and printing to create customised flutes that can play music in a variety of microtonal scales. One of the challenges in the field of microtonality is that conventional musical instruments are inadequate for realising the abundance of theoretical tunings that musicians wish to investigate. This paper focuses on the development of two types of flutes, the recorder and transverse flute, with interchangeable mouthpieces. These flutes are designed to play subharmonic microtonal scales. The discussion provides an overview of the design and implementation process, including calculation methods for acoustic modelling and 3D printing technologies, as well as an evaluation of some of the difficulties encountered. Results from our 3D printed flutes suggest that whilst further refinements are necessary in our designs, 3D modelling and printing techniques offer new and valuable methods for the design and production of customised musical instruments. The long term goal of this project is to create a system in which users can specify the tuning of their instrument to generate a 3D model and have it printed on demand

Additive Manufacturing, Modeling and Performance Evaluation of 3D Printed Fins for Surfboards

We demonstrate that Additive Manufacturing (3D printing) is a viable approach to rapidly prototype personalised fins for surfboards. Surfing is an iconic sport that is extremely popular in coastal regions around the world. We use computer aided design and 3D printing of a wide range of composite materials to print fins for surfboards, e.g. ABS, carbon fibre, fibre glass and amorphous thermoplastic poly(etherimide) resins. The mechanical characteristics of our 3D printed fins were found to be comparable to commercial fins. Computational fluid dynamics was employed to calculate longitudinal (drag) and tangential (turning) forces, which are important for surfboard maneuverability, stability and speed. A commercial tracking system was used to evaluate the performance of 3D printed fins under real-world conditions (i.e. surfing waves). These data showed that the surfing performance of surfboards with 3D printed fins is similar to that of surfboards with commercial fins

The Bionic Bra: Using electromaterials to sense and modify breast support to enhance active living

Background: Although the most supportive sports bras can control breast motion and associated breast pain, they are frequently deemed uncomfortable to wear and, as a result, many women report exercise bra discomfort. Given that exercise bra discomfort is associated with decreased levels of physical activity, there is a pertinent need to develop innovative solutions to address this problem. Objectives: This research aimed to evaluate the use of electromaterial sensors and artificial muscle technology to create a bra that was capable of detecting increases in breast motion and then responding with increased breast support to enhance active living. Methods: The research involved two phases: (i) evaluating sensors suitable for monitoring and providing feedback on changes in the amplitude and frequency of breast motion, and (ii) evaluating an actuator capable of changing breast support provided by a bra during activity. Results: When assessed in isolation, the developed technologies were capable of sensing breast motion and actuating to provide some additional breast support. Conclusions: The challenge now lies in integrating both technologies into a functional sports bra prototype, and assessing this prototype in a controlled biomechanical analysis to provide a breast support solution that will enable women to enjoy active living in comfort

Development of a Coaxial 3D Printing Platform for Biofabrication of Implantable Islet-Containing Constructs

Over the last two decades, pancreatic islet transplantations have become a promising treatment for Type I diabetes. However, although providing a consistent and sustained exogenous insulin supply, there are a number of limitations hindering the widespread application of this approach. These include the lack of sufficient vasculature and allogeneic immune attacks after transplantation, which both contribute to poor cell survival rates. Here, these issues are addressed using a biofabrication approach. An alginate/gelatin-based bioink formulation is optimized for islet and islet-related cell encapsulation and 3D printing. In addition, a custom-designed coaxial printer is developed for 3D printing of multicellular islet-containing constructs. In this work, the ability to fabricate 3D constructs with precise control over the distribution of multiple cell types is demonstrated. In addition, it is shown that the viability of pancreatic islets is well maintained after the 3D printing process. Taken together, these results represent the first step toward an improved vehicle for islet transplantation and a potential novel strategy to treat Type I diabetes

Remote real-time monitoring of subsurface landfill gas migration

The cost of monitoring greenhouse gas emissions from landfill sites is of major concern for regulatory authorities. The current monitoring procedure is recognised as labour intensive, requiring agency inspectors to physically travel to perimeter borehole wells in rough terrain and manually measure gas concentration levels with expensive hand-held instrumentation. In this article we present a cost-effective and efficient system for remotely monitoring landfill subsurface migration of methane and carbon dioxide concentration levels. Based purely on an autonomous sensing architecture, the proposed sensing platform was capable of performing complex analytical measurements in situ and successfully communicating the data remotely to a cloud database. A web tool was developed to present the sensed data to relevant stakeholders. We report our experiences in deploying such an approach in the field over a period of approximately 16 months. Copyright 2011 by the authors; licensee MDPI, Basel, Switzerland

Mammal responses to global changes in human activity vary by trophic group and landscape

Wildlife must adapt to human presence to survive in the Anthropocene, so it is critical to understand species responses to humans in different contexts. We used camera trapping as a lens to view mammal responses to changes in human activity during the COVID-19 pandemic. Across 163 species sampled in 102 projects around the world, changes in the amount and timing of animal activity varied widely. Under higher human activity, mammals were less active in undeveloped areas but unexpectedly more active in developed areas while exhibiting greater nocturnality. Carnivores were most sensitive, showing the strongest decreases in activity and greatest increases in nocturnality. Wildlife managers must consider how habituation and uneven sensitivity across species may cause fundamental differences in human–wildlife interactions along gradients of human influence.Peer reviewe

Rheumatoid arthritis - treatment: 180. Utility of Body Weight Classified Low-Dose Leflunomide in Japanese Rheumatoid Arthritis

Background: In Japan, more than 20 rheumatoid arthritis (RA) patients died of interstitial pneumonia (IP) caused by leflunomide (LEF) were reported, but many of them were considered as the victims of opportunistic infection currently. In this paper, efficacy and safety of low-dose LEF classified by body weight (BW) were studied. Methods: Fifty-nine RA patients were started to administrate LEF from July 2007 to July 2009. Among them, 25 patients were excluded because of the combination with tacrolimus, and medication modification within 3 months before LEF. Remaining 34 RA patients administered 20 to 50 mg/week of LEF were followed up for 1 year and enrolled in this study. Dose of LEF was classified by BW (50 mg/week for over 50 kg, 40 mg/week for 40 to 50 kg and 20 to 30 mg/week for under 40 kg). The average age and RA duration of enrolled patients were 55.5 years old and 10.2 years. Prednisolone (PSL), methotrexate (MTX) and etanercept were used in 23, 28 and 2 patients, respectively. In case of insufficient response or adverse effect, dosage change or discontinuance of LEF were considered. Failure was defined as dosages up of PSL and MTX, or dosages down or discontinuance of LEF. Last observation carried forward method was used for the evaluation of failed patients at 1 year. Results: At 1 year after LEF start, good/ moderate/ no response assessed by the European League Against Rheumatism (EULAR) response criteria using Disease Activity Score, including a 28-joint count (DAS28)-C reactive protein (CRP) were showed in 14/ 10/ 10 patients, respectively. The dosage changes of LEF at 1 year were dosage up: 10, same dosage: 5, dosage down: 8 and discontinuance: 11 patients. The survival rate of patients in this study was 23.5% (24 patients failed) but actual LEF continuous rate was 67.6% (11 patients discontinued) at 1 year. The major reason of failure was liver dysfunction, and pneumocystis pneumonia was occurred in 1 patient resulted in full recovery. One patient died of sepsis caused by decubitus ulcer infection. DAS28-CRP score was decreased from 3.9 to 2.7 significantly. Although CRP was decreased from 1.50 to 0.93 mg/dl, it wasn't significant. Matrix metalloproteinase (MMP)-3 was decreased from 220.0 to 174.2 ng/ml significantly. Glutamate pyruvate transaminase (GPT) was increased from 19 to 35 U/l and number of leukocyte was decreased from 7832 to 6271 significantly. DAS28-CRP, CRP, and MMP-3 were improved significantly with MTX, although they weren't without MTX. Increase of GPT and leukopenia were seen significantly with MTX, although they weren't without MTX. Conclusions: It was reported that the risks of IP caused by LEF in Japanese RA patients were past IP history, loading dose administration and low BW. Addition of low-dose LEF is a potent safe alternative for the patients showing unsatisfactory response to current medicines, but need to pay attention for liver function and infection caused by leukopenia, especially with MTX. Disclosure statement: The authors have declared no conflicts of interes

Multiorgan MRI findings after hospitalisation with COVID-19 in the UK (C-MORE): a prospective, multicentre, observational cohort study

Introduction: The multiorgan impact of moderate to severe coronavirus infections in the post-acute phase is still poorly understood. We aimed to evaluate the excess burden of multiorgan abnormalities after hospitalisation with COVID-19, evaluate their determinants, and explore associations with patient-related outcome measures. Methods: In a prospective, UK-wide, multicentre MRI follow-up study (C-MORE), adults (aged ≥18 years) discharged from hospital following COVID-19 who were included in Tier 2 of the Post-hospitalisation COVID-19 study (PHOSP-COVID) and contemporary controls with no evidence of previous COVID-19 (SARS-CoV-2 nucleocapsid antibody negative) underwent multiorgan MRI (lungs, heart, brain, liver, and kidneys) with quantitative and qualitative assessment of images and clinical adjudication when relevant. Individuals with end-stage renal failure or contraindications to MRI were excluded. Participants also underwent detailed recording of symptoms, and physiological and biochemical tests. The primary outcome was the excess burden of multiorgan abnormalities (two or more organs) relative to controls, with further adjustments for potential confounders. The C-MORE study is ongoing and is registered with ClinicalTrials.gov, NCT04510025. Findings: Of 2710 participants in Tier 2 of PHOSP-COVID, 531 were recruited across 13 UK-wide C-MORE sites. After exclusions, 259 C-MORE patients (mean age 57 years [SD 12]; 158 [61%] male and 101 [39%] female) who were discharged from hospital with PCR-confirmed or clinically diagnosed COVID-19 between March 1, 2020, and Nov 1, 2021, and 52 non-COVID-19 controls from the community (mean age 49 years [SD 14]; 30 [58%] male and 22 [42%] female) were included in the analysis. Patients were assessed at a median of 5·0 months (IQR 4·2–6·3) after hospital discharge. Compared with non-COVID-19 controls, patients were older, living with more obesity, and had more comorbidities. Multiorgan abnormalities on MRI were more frequent in patients than in controls (157 [61%] of 259 vs 14 [27%] of 52; p<0·0001) and independently associated with COVID-19 status (odds ratio [OR] 2·9 [95% CI 1·5–5·8]; padjusted=0·0023) after adjusting for relevant confounders. Compared with controls, patients were more likely to have MRI evidence of lung abnormalities (p=0·0001; parenchymal abnormalities), brain abnormalities (p<0·0001; more white matter hyperintensities and regional brain volume reduction), and kidney abnormalities (p=0·014; lower medullary T1 and loss of corticomedullary differentiation), whereas cardiac and liver MRI abnormalities were similar between patients and controls. Patients with multiorgan abnormalities were older (difference in mean age 7 years [95% CI 4–10]; mean age of 59·8 years [SD 11·7] with multiorgan abnormalities vs mean age of 52·8 years [11·9] without multiorgan abnormalities; p<0·0001), more likely to have three or more comorbidities (OR 2·47 [1·32–4·82]; padjusted=0·0059), and more likely to have a more severe acute infection (acute CRP >5mg/L, OR 3·55 [1·23–11·88]; padjusted=0·025) than those without multiorgan abnormalities. Presence of lung MRI abnormalities was associated with a two-fold higher risk of chest tightness, and multiorgan MRI abnormalities were associated with severe and very severe persistent physical and mental health impairment (PHOSP-COVID symptom clusters) after hospitalisation. Interpretation: After hospitalisation for COVID-19, people are at risk of multiorgan abnormalities in the medium term. Our findings emphasise the need for proactive multidisciplinary care pathways, with the potential for imaging to guide surveillance frequency and therapeutic stratification

System and process development for coaxial extrusion in fused deposition modelling

Purpose: This paper aims to design and test a system capable of coaxial fused deposition modelling (FDM) and assess the coaxial fibres produced for their coaxial concentricity. The goal is to achieve concentricity values below the literature standard of 15 per cent. Design/methodology/approach: This research discusses the design of the coaxial nozzle internal geometry and validates the modelling process by using computational fluid dynamics to assess its flow profile. Sequentially, this paper discusses the abilities of current additive manufacturing (AM) technology in the production of the coaxial nozzle. Findings: The methodology followed has produced coaxial fibres with concentricity values as low as 2.89 per cent and also identifies a clear speed suitable for coaxial printing using polylactic acid (PLA) as the internal and external materials. Research limitations/implications: The concentricity of the printed fibres is heavily influenced by the feed rate for the thermoplastic feedstock. This in turn alters the viscosity of the material to be printed, implying that a relationship exists between feed rate and print temperature, which can be further optimised to potentially obtain higher concentricity values. Practical implications: This paper adds reliability and repeatability to the production of coaxially printed structures, the likes of which has numerous potential applications for biological printing. Originality/value: The outcomes of this study will provide an AM platform to alter the paradigm of biofabrication by introducing a new level of versatility to the construction of biofabricated structures

3D Printed Electrodes for Improved Gas Reactant Transport for Electrochemical Reactions

Additive manufacturing (AM) techniques open up a range of new possibilities for the design of electrochemical systems, affording us the ability to overcome limitations and difficulties that traditional production processes face. Here we present a novel electrode design, realized through selective laser melting of metal powders, with an integrated gas (reactant) delivery system. This architecture results in significantly (∼40%) enhanced hydrogen oxidation performance as compared with a control system. As such, this work serves as a proof-of-concept to highlight the wide array of designs that can be readily achieved due to recent developments in AM technologies