76 research outputs found

    Efecto de diferntes parámetros de represas heterogeneas en el factor de seguridad usando redes neuronales. Caso de estudio. Represa Marvak

    Get PDF
    The drainage system is used to guide the flow of water in the earth dams. Construction of drainage in the dam body to collect and direct the drainage formed in the dam body to keep the slope dry and prevent the increase of pore water pressure in the body. One of the main goals of the designers is to find the minimum factor of safety and, consequently, reduce the cost of construction. In this study, the Marvak dam is modeled with the actual characteristics of the materials in the Geostudio software, and with the change in the dimensions of the drain, the material and the slope of the dam body, the minimum Factor of safety of the dam is obtained. In order to predict the minimum Factor of safety, a two-layer neural network has been used. With the training of the neural network based on the data obtained from heterogeneous dams, a minimum Factor of safety has been extracted for optimization of drainage. Finally, it was determined that the internal friction angle of the body material and the slope of the dam have the greatest effect on the dam factor of safety.El sistema de drenaje se utiliza para guiar el flujo de agua en las presas de tierra. Construcción de drenaje en el cuerpo de la presa para recoger y dirigir el drenaje formado en el cuerpo de la presa para mantener la pendiente seca y evitar el aumento de la presión de agua de los poros en el cuerpo. Uno de los principales objetivos de los diseñadores es encontrar el factor mínimo de seguridad y, en consecuencia, reducir el costo de la construcción. En este estudio, la presa Marvak se modela con las características reales de los materiales en el software Geostudio, y con el cambio en las dimensiones del drenaje, el material y la pendiente del cuerpo de la presa, el factor mínimo de seguridad de la presa es obtenido. Para predecir el Factor mínimo de seguridad, se ha utilizado una red neuronal de dos capas. Con el entrenamiento de la red neuronal basado en los datos obtenidos de represas heterogéneas, se extrajo un Factor mínimo de seguridad para la optimización del drenaje. Finalmente, se determinó que el ángulo de fricción interna del material del cuerpo y la pendiente de la presa tienen el mayor efecto sobre el factor de seguridad de la presa

    Efecto de diferentes parámetros de represas heterogéneas en el factor de seguridad usando redes neuronales. caso de estudio. Represa marvak

    Get PDF
    El sistema de drenaje se utiliza para guiar el flujo de agua en las presas de tierra. Construcción de drenaje en el cuerpo de la presa para recoger y dirigir el drenaje formado en el cuerpo de la presa para mantener la pendiente seca y evitar el aumento dela presión de agua de los poros en el cuerpo. Uno de los principales objetivos de los diseñadores es encontrar el factor mínimo de seguridad y, en consecuencia, reducir el costo de la construcción. En este estudio, la presa Marvak se modela con las características reales de los materiales en el software Geostudio, y con el cambio en las dimensiones del drenaje, el material y la pendiente del cuerpo de la presa, el factor mínimo de seguridad de la presa es obtenido. Para predecir el Factor mínimo de seguridad, se ha utilizado una red neuronal de dos capas. Con el entrenamiento de la red neuronal basado en los datos obtenidos de represas heterogéneas, se extrajo un Factor mínimo de seguridad para la optimización del drenaje. Finalmente, se determinó que el ángulo de fricción interna del material del cuerpo y la pendiente de la presa tienen el mayor efecto sobre el factor de seguridad de la pres

    A distributed terahertz metasurface with cold-electron bolometers for cosmology missions

    Get PDF
    We developed and tested a 2D periodic array of cold-electron bolometers arranged into a wideband frequency selective metasurface that absorbs more than 70% of the incident power in the frequency range 100–800 GHz. The array had 10 7 10 unit cells, each containing four bolometers incorporated into a ring. The chip with bolometers was mounted on the back side of the silicon lens without a back-reflector. Preliminary experiments demonstrated voltage responsivity as high as 10 V/W for the current-biased series array. Simulation of the noise performance shows realization of background noise-limited performance with NEP < NEP for the optical power load P > 15 pW. Results of numerical simulation made for the unit cell of the array are presented together with the equivalent diagram based on lumped network elements. The unit cell also was developed numerically to operate in two radiation modes

    A Comparative Study of Convolutional Neural Networks and Conventional Machine Learning Models for Lithological Mapping Using Remote Sensing Data

    Full text link
    Lithological mapping is a critical aspect of geological mapping that can be useful in studying the mineralization potential of a region and has implications for mineral prospectivity mapping. This is a challenging task if performed manually, particularly in highly remote areas that require a large number of participants and resources. The combination of machine learning (ML) methods and remote sensing data can provide a quick, low-cost, and accurate approach for mapping lithological units. This study used deep learning via convolutional neural networks and conventional ML methods involving support vector machines and multilayer perceptron to map lithological units of a mineral-rich area in the southeast of Iran. Moreover, we used and compared the efficiency of three different types of multispectral remote-sensing data, including Landsat 8 operational land imager (OLI), advanced spaceborne thermal emission and reflection radiometer (ASTER), and Sentinel-2. The results show that CNNs and conventional ML methods effectively use the respective remote-sensing data in generating an accurate lithological map of the study area. However, the combination of CNNs and ASTER data provides the best performance and the highest accuracy and adaptability with field observations and laboratory analysis results so that almost all the test data are predicted correctly. The framework proposed in this study can be helpful for exploration geologists to create accurate lithological maps in other regions by using various remote-sensing data at a low cost.</jats:p
    corecore