Design of sensor electronics for electrical capacitance tomography

The design of the sensor electronics for a tomographic imaging system based on electrical capacitance sensors is described. The performance of the sensor electronics is crucial to the performance of the imaging system. The problems associated with such a measurement process are discussed and solutions to these are described. Test results show that the present design has a resolution of 0.3 femtofarad. (For a 12-electrode system imaging an oil/gas flow, this represents a 2% gas void fraction change at the centre of the pipe) with a low noise level of 0.08 fF (RMS value), a large dynamic range of 76 dB and a data acquisition speed of 6600 measurements per second. This enables sensors with up to 12 electrodes to be used in a system with a maximum imaging rate of 100 frames per second, and thus provides an improved image resolution over the earlier 8-electrode system and an adequate electrode area to give sufficient measurement sensitivit

Electrical capacitance tomography for flow imaging: System model for development of image reconstruction algorithms and design of primary sensors

A software tool that facilitates the development of image reconstruction algorithms, and the design of optimal capacitance sensors for a capacitance-based 12-electrode tomographic flow imaging system are described. The core of this software tool is the finite element (FE) model of the sensor, which is implemented in OCCAM-2 language and run on the Inmos T800 transputers. Using the system model, the in-depth study of the capacitance sensing fields and the generation of flow model data are made possible, which assists, in a systematic approach, the design of an improved image-reconstruction algorithm. This algorithm is implemented on a network of transputers to achieve a real-time performance. It is found that the selection of the geometric parameters of a 12-electrode sensor has significant effects on the sensitivity distributions of the capacitance fields and on the linearity of the capacitance data. As a consequence, the fidelity of the reconstructed images are affected. Optimal sensor designs can, therefore, be provided, by accommodating these effect

vivo antibacterial efficacy of ultrasound after hand and rotary instrumentation in human mandibular molars

Abstract The purpose of this prospective, randomized, singleblind study was to compare the in vivo antibacterial efficacy of a hand/rotary technique versus a hand/ rotary/ultrasound technique in mesial root canals of necrotic mandibular molars. The hand/rotary group consisted of 16 mesial roots prepared with a hand/ rotary technique. The hand/rotary/ultrasound group consisted of 15 mesial roots prepared similarly, followed by 1 minute of ultrasonic irrigation per canal with an ultrasonic needle in a MiniEndo unit and 15 mL/canal of 6.0% sodium hypochlorite. Canals were sampled before and after instrumentation and after 1 minute of ultrasonic irrigation. Samples were incubated anaerobically on reduced blood agar for 7 days at 37°C, and colony-forming units (CFUs) were counted. The addition of 1 minute of ultrasonic irrigation resulted in significant (p ϭ .0006) reduction in CFU count and positive cultures (p ϭ .0047). Logistic regression analysis indicated the addition of ultrasonic irrigation was 7 times more likely to yield a negative culture. (J Endo

University Clinical Media Resource: Best Practices to Create, Maintain, and Maximize Visibility on a Social Media Platform

This paper reviews the need for social media platforms as a tool for healthcare facilities to provide resources, market their business, and interact directly with clients. Steps to creating a social media platform will be discussed, in addition to how healthcare facilities should frequently review competing healthcare providers’ social media pages to stay competitive with the target population. Special considerations for the audiology and speech-language pathology programs at Illinois State University will be explored, and ethical considerations for engaging in healthcare on a social media platform will also be analyzed in this paper. The Eckelmann-Taylor Speech and Hearing Clinic at Illinois State University (ETSHC) will benefit from the information and implementation of social media usage provided within this paper because it will allow the clinic to create a professional social media platform. This social media platform will improve patient outreach within the community to increase and diversify the clientele attending that clinic, and allow for the opportunity of interprofessional collaboration between the ETSHC and other speech-language pathology and audiology providers. Undergraduate students and graduate students in the programs of speech-language pathology and audiology will benefit from the ETSHC executing a social media platform to expand the opportunities and experiences provided throughout their education

The Cost-Effectiveness of Early Access to HIV Services and Starting cART in the UK 1996–2008

To calculate use, cost and cost-effectiveness of people living with HIV (PLHIV) starting routine treatment and care before starting combination antiretroviral therapy (cART) and PLHIV starting first-line 2NRTIs+NNRTI or 2NRTIs+PI(boosted), comparing PLHIV with CD4≤200 cells/mm3 and CD4>200 cells/mm3. Few studies have calculated the use, cost and cost-effectiveness of routine treatment and care before starting cART and starting cART above and below CD4 200 cells/mm3.Use, costs and cost-effectiveness were calculated for PLHIV in routine pre-cART and starting first-line cART, comparing CD4≤200 cells/mm3 with CD4>200 cells/mm3 (2008 UK prices).cART naïve patients CD4≤200 cells/mm3 had an annual cost of £6,407 (95%CI £6,382 to £6,425) PPY compared with £2,758 (95%CI £2,752 to £2,761) PPY for those with CD4>200 cells/mm3; cost per life year gained of pre-cART treatment and care for those with CD4>200 cells/mm3 was £1,776 (cost-saving to £2,752). Annual cost for starting 2NRTIs+NNRTI or 2NRTIs+PI(boosted) with CD4≤200 cells/mm3 was £12,812 (95%CI £12,685-£12,937) compared with £10,478 (95%CI £10,376-£10,581) for PLHIV with CD4>200 cells/mm3. Cost per additional life-year gained on first-line therapy for those with CD4>200 cells/mm3 was £4639 (£3,967 to £2,960).PLHIV starting to use HIV services before CD4≤200 cells/mm3 is cost-effective and enables them to be monitored so they start cART with a CD4>200 cells/mm3, which results in better outcomes and is cost-effective. However, 25% of PLHIV accessing services continue to present with CD4≤200 cells/mm3. This highlights the need to investigate the cost-effectiveness of testing and early treatment programs for key populations in the UK

The changing nature of risk and risk management: the challenge of borders, uncertainty and resilience

No abstract available

Islamic Monetary Economics: Insights from the Literature

This chapter reviews critical early literature of Islamic monetary economics. The prohibition of Riba has imposed challenges on Islamic economists to come up with the viable alternatives to achieve Islamic monetary policy goals. Our extensive review of theoretical and empirical literature indicates that equity based profit- and loss-sharing instruments have been proposed for conducting open market operations in an interest-free economy. Theoretically, the central bank can achieve desired goals by controlling money supply and profit-sharing ratios. The findings from empirical literature suggest that money demand tend to be more stable in an interest-free economy. Whether monetary transmission works through Islamic banking channel is controversial, but the literature is growing. These findings are not surprising as majority Muslim countries lack sustainable and equitable economic growth. Moreover, these countries suffer from higher inflation and unemployment with little or no monetary freedom due to fixed exchange rate regime, shallow financial markets and strict capital control

Modelling Realistic User Behaviour in Information Systems Simulations as Fuzzing Aspects

In this paper we contend that the engineering of information systems is hampered by a paucity of tools to tractably model, simulate and predict the impact of realistic user behaviours on the emergent properties of the wider socio-technical system, evidenced by the plethora of case studies of system failure in the literature. We address this gap by presenting a novel approach that models ideal user behaviour as workflows, and introduces irregularities in that behaviour as aspects which fuzz the model. We demonstrate the success of this approach through a case study of software development workflows, showing that the introduction of realistic user behaviour to idealised workflows better simulates outcomes reported in the empirical software engineering literature

Designing an information system for updating land records in Bangladesh: action design ethnographic research (ADER)

Open Access. This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.This article has been made available through the Brunel Open Access Publishing Fund.Information Systems (IS) has developed through adapting, generating and applying diverse methodologies, methods, and techniques from reference disciplines. Further, Action Design Research (ADR) has recently developed as a broad research method that focuses on designing and redesigning IT and IS in organizational contexts. This paper reflects on applying ADR in a complex organizational context in a developing country. It shows that ADR requires additional lens for designing IS in such a complex organizational context. Through conducting ADR, it is seen that an ethnographic framework has potential complementarities for understanding complex contexts thereby enhancing the ADR processes. This paper argues that conducting ADR with an ethnographic approach enhances design of IS and organizational contexts. Finally, this paper aims presents a broader methodological framework, Action Design Ethnographic Research (ADER), for designing artefacts as well as IS. This is illustrated through the case of a land records updating service in Bangladesh