Modelling spontaneous combustion of coal

Spontaneous combustion of coal is an important problem in mining and storage, in terms of both safety and economics. This is because coal reacts with oxygen in the air and an exothermic reaction occurs, even in ambient conditions. The heat of the reaction accumulates and the reaction becomes progressively faster and thermal runaway may take place to the point of ignition. A detailed computer model has been developed to simulate a bulk-scale, one-dimensional test column. Predictions from this model can then be used to simulate full-scale storage conditions. Model predictions are verified by using the experimental results from the test column at the University of Queensland. A 2-m column is being used in this laboratory to conduct a practical test capable of providing reliable data on coal self-heating. Coal self-heating results produced with the 2-m column are consistent with theory. In particular, the hot spot development in test runs closely matches model predictions. Features of moisture transfer and hot spot migration are clearly visible, both in the model and in tests in the column. Under the specific conditions considered in this study, it is shown that a subbituminous coal can reach thermal runaway in 4.5 days. This result is confirmed by observations made at the mine site, where hot spots have been found to occur within this timeframe. The results obtained in this study indicate that there is a definite need to consider the influence of coal moisture on spontaneous combustion

Analysis of Ethane Emission Trends from Active Goaf Seals at Mandalong Mine

Monitoring of active goaf seals at Mandalong Mine shows anomalous levels of ethane concentrations. Currently ethane concentrations exceeding 250 ppm have been experienced from 30 to 32 C/T seals of MG8 with the remainder of the panel averaging 50 - 100 ppm. Active goaf seals for MG7 and MG9 average 50 - 100 ppm and 80 - 100 ppm, respectively. For most mines these concentrations of ethane would be assumed to indicate a spontaneous combustion event; however no carbon monoxide is being recorded and a sympathetic relationship with methane indicates that the measured ethane is due to gas desorption. This paper presents the results from the mine showing trends in ethane emissions from the active goaf seals to date, and shows how this historical data can be used to predict expected ethane concentrations in the active goaf of MG10

Development of a Pre-Driven Recovery Evaluation Program for Longwall Operations

Many longwall coordinators are examining the use of pre-driven recovery roadways. This method, if performed successfully can improve the overall efficiency and safety of moving longwall equipment from panel to panel. However, it is difficult to assess the feasibility of using predriven recovery unless extensive research is carried out or a consultant is used to analyse the particular situation. A number of previous case studies have been analysed to discover which parameters have the greatest influence on the success of pre-driven recovery. Floor strength, Coal Mine Roof Rating (CMRR), extraction depth, Roof Density Index (RDI), standing support and mining rate were the main parameters impacting on the successful implementation of pre-driven recovery roadways. These parameters have been incorporated into a program that was developed to assess the feasibility of using pre-driven recovery roadways. The Pre-driven Recovery Evaluation Program (PREP) is simple to operate and it will enable new longwall mining operations as well as current operations to quickly determine the suitability of the method to their site

Laboratory-scale assessment of hot spot development in bulk coal self-heating

A new two-metre column self-heating test procedure has been developed at the University of Queensland, which clearly shows the hot spot development phases that take place in bulk coal self-heating. The column results provide a more reliable indication of the self-heating propensity of coal than small-scale index tests. At the same time, off-gas evolution patterns associated with hot spot development are obtained, including the recognition of hydrogen evolution from oxidation at temperatures less than 80°C. Subtle differences in off-gas evolution from self-heating between gassy and gas-drained coal are also apparent. This new approach to coal self-heating assessment offers an opportunity to further the understanding of the complexities of spontaneous combustion and will enable more accurate risk assessment for the coal industry

A temperature-controlled device for volumetric measurements of Helium adsorption in porous media

We describe a set-up for studying adsorption of helium in silica aerogels, where the adsorbed amount is easily and precisely controlled by varying the temperature of a gas reservoir between 80 K and 180 K. We present validation experiments and a first application to aerogels. This device is well adapted to study hysteresis, relaxation, and metastable states in the adsorption and desorption of fluids in porous media

The Murdoch-Godfrey Letters of 1869: A Nova Scotia - Maine Historical Correspondence

An introduction, source notes, and transcription of three letters from Beamis Murdoch in Halifax, Nova Scotia, to John Edward Godfrey in Bangor, Maine, February 8 to 27, 1869

Commissioning adiabatic oven testing - an inter-laboratory comparison

Adiabatic oven testing for spontaneous combustion assessment has been a primary method used by the Australian and New Zealand coal industries for input to the development of Principal Hazard Management Plans for mining operations. Consistency of results is important to ensure that the ratings obtained are accurate and reliable for maintaining the integrity of the database used to compare between mines and for obtaining site specific relationships. This paper presents the results from commissioning tests of four new adiabatic ovens at two different laboratories, which show the high level of reproducibility and repeatability needed for confidence in planning of future mining operations. The results cover a range of coal self-heating rates to show the validity of the testing and the reliability of the adiabatic ovens

The holy blood and the holy grail: Myths of scientific racism and the pursuit of excellence in sport

Despite the continuing publication of research that suggests there is no scientific basis to 'race' as a biological category, theories of racial difference continue to be invoked within sport to explain the perceived dominance of black athletes. In the case of John Entine's controversial 'Taboo: why black athletes dominate sports and why we are afraid to talk about it' or undergraduate textbooks that suggest 'racial differences' in physique may significantly affect athletic performance, scientific racism is normalised in sport. In this article, the relationship between scientific racism and sport will be examined. Qualitative research with current sport scientists is used to investigate the socio-ethical tensions within the subject field of sport science between professionalism, scientism and the demand from external interests to produce results that help people in sport win medals. It will be shown that these tensions, combined with the history of race as a category in sport science, combine to create the discourse of scientific knowledge that reflects, rather than challenges, folk genetics of black athletic physicality

UK export performance research - review and implications

Previous research on export performance has been criticized for being a mosaic of autonomous endeavours and for a lack of theoretical development. Building upon extant models of export performance, and a review and analysis of research on export performance in the UK for the period 1990-2005, an integrated model of export performance is developed and theoretical explanations of export performance are put forward. It is suggested that a multi-theory approach to explaining export performance is viable. Management and policy implications for the UK emerging from the review and synthesis of the literature and the integrated model are discussed

Recent Salmon Declines: A Result of Lost Feeding Opportunities Due to Bad Timing?

As the timing of spring productivity blooms in near-shore areas advances due to warming trends in global climate, the selection pressures on out-migrating salmon smolts are shifting. Species and stocks that leave natal streams earlier may be favoured over later-migrating fish. The low post-release survival of hatchery fish during recent years may be in part due to static release times that do not take the timing of plankton blooms into account. This study examined the effects of release time on the migratory behaviour and survival of wild and hatchery-reared coho salmon (Oncorhynchus kisutch) using acoustic and coded-wire telemetry. Plankton monitoring and near-shore seining were also conducted to determine which habitat and food sources were favoured. Acoustic tags (n = 140) and coded-wire tags (n = 266,692) were implanted into coho salmon smolts at the Seymour and Quinsam Rivers, in British Columbia, Canada. Differences between wild and hatchery fish, and early and late releases were examined during the entire lifecycle. Physiological sampling was also carried out on 30 fish from each release group. The smolt-to-adult survival of coho salmon released during periods of high marine productivity was 1.5- to 3-fold greater than those released both before and after, and the fish's degree of smoltification affected their downstream migration time and duration of stay in the estuary. Therefore, hatchery managers should consider having smolts fully developed and ready for release during the peak of the near-shore plankton blooms. Monitoring chlorophyll a levels and water temperature early in the spring could provide a forecast of the timing of these blooms, giving hatcheries time to adjust their release schedule