1,021 research outputs found
Modeling the global positioning system signal propagation through the ionosphere
Based on realistic modeling of the electron density of the ionosphere and using a dipole moment approximation for the Earth's magnetic field, one is able to estimate the effect of the ionosphere on the Global Positioning System (GPS) signal for a ground user. The lowest order effect, which is on the order of 0.1-100 m of group delay, is subtracted out by forming a linear combination of the dual frequencies of the GPS signal. One is left with second- and third-order effects that are estimated typically to be approximately 0-2 cm and approximately 0-2 mm at zenith, respectively, depending on the geographical location, the time of day, the time of year, the solar cycle, and the relative geometry of the magnetic field and the line of sight. Given the total electron content along a line of sight, the authors derive an approximation to the second-order term which is accurate to approximately 90 percent within the magnetic dipole moment model; this approximation can be used to reduce the second-order term to the millimeter level, thus potentially improving precise positioning in space and on the ground. The induced group delay, or phase advance, due to second- and third-order effects is examined for two ground receivers located at equatorial and mid-latitude regions tracking several GPS satellites
Electromagnetic wave propagation through a dielectric-chiral interface and through a chiral slab
The reflection from and transmission through a semi-infinite chiral medium are analyzed by obtaining the Fresnel equations in terms of parallel- and perpendicular-polarized modes, and a comparison is made with results reported previously. The chiral medium is described electromagnetically by the constitutive relations D = εE + iγB and H = iγE + (1/μ)B. The constants ε, μ, and γ are real and have values that are fixed by the size, the shape, and the spatial distribution of the elements that collectively compose the medium. The conditions are obtained for the total internal reflection of the incident wave from the interface and for the existence of the Brewster angle. The effects of the chirality on the polarization and the intensity of the reflected wave from the chiral half-space are discussed and illustrated by using the Stokes parameters. The propagation of electromagnetic waves through an infinite slab of chiral medium is formulated for oblique incidence and solved analytically for the case of normal incidence
Nutritional value of raw soybeans, extruded soybeans, roasted soybeans and tallow as fat sources in early lactating dairy cows
Thirty multiparous Holstein cows (29.8 ± 4.01days in milk; 671.6 ± 31.47 kg of body weight) were used in a completely randomized design to compare nutritional value of four fat sources including tallow, raw soybeans, extruded soybeans and roasted soybeans for 8 weeks. Experimental diets were a control containing 27.4 % alfalfa silage, 22.5% corn silage, and 50.1% concentrate, and four diets with either tallow, raw soybean, extruded soybean, or roasted soybean added to provide 1.93% supplemental fat. Dry matter and NEL intakes were similar among treatments, while cows fed fat diets had significantly (P<0.05) high NEL intakes when compared to control with no fat. Supplemental fat, whether tallow or full fat soybeans increased milk production (1.89-2.45 kg/d; P<0.01) and FCM production (1.05-2.79; P<0.01). Milk fat yield and percentage of cows fed fat-supplemented diets were significantly (P<0.01 and P<0.05 respectively) higher than control. Between fat-supplemented diets, roasted soybean caused highest milk fat yield and extruded soybean caused lowest milk fat yield. There was no significant effect of supplemental fat on the milk protein and lactose content and yield. Feed efficiency of fat-supplemented diets was significantly (P<0.01) higher than control. Body weight, body weight change and BCS (body condition score) of cows, as well as energy balance and energy efficiency were similar between treatments. In conclusion, while there was no significant effect of fat sources on production response of cows, fat originating from heat-treated soybean help to minimize imported RUP (rumen undegradable protein) sources level as fish meal in comparison with tallow and raw soybean oil. In the Current study, there was no statistical significance among nutritional values of oil from extruded soybeans and roasted soybeans
Investigating the medium range order in amorphous Ta<sub>2</sub>O<sub>5</sub> coatings
Ion-beam sputtered amorphous heavy metal oxides, such as Ta2O5, are widely used as the high refractive index layer of highly reflective dielectric coatings. Such coatings are used in the ground based Laser Interferometer Gravitational-wave Observatory (LIGO), in which mechanical loss, directly related to Brownian thermal noise, from the coatings forms an important limit to the sensitivity of the LIGO detector. It has previously been shown that heat-treatment and TiO2 doping of amorphous Ta2O5 coatings causes significant changes to the levels of mechanical loss measured and is thought to result from changes in the atomic structure. This work aims to find ways to reduce the levels of mechanical loss in the coatings by understanding the atomic structure properties that are responsible for it, and thus helping to increase the LIGO detector sensitivity. Using a combination of Reduced Density Functions (RDFs) from electron diffraction and Fluctuation Electron Microscopy (FEM), we probe the medium range order (in the 2-3 nm range) of these amorphous coatings
Correlations between the mechanical loss and atomic structure of amorphous TiO2-doped Ta2O5 coatings
<p>Highly reflective dielectric mirror coatings are critical components in a range of precision optics applications including frequency combs, optical atomic clocks, precision interferometry and ring laser gyroscopes. A key limitation to the performance in these applications is thermal noise, arising from the mechanical loss of the coatings. The origins of the mechanical loss from these coatings is not well understood.</p>
<p>Recent work suggests that the mechanical loss of amorphous Ta2O5 coatings can drop by as much as 40% when it is doped with TiO2. We use a combination of electron diffraction data and atomic modelling using molecular dynamics to probe the atomic structure of these coatings, and examine the correlations between changes in the atomic structure and changes in the mechanical loss of these coatings. Our results show the first correlation between changes in the mechanical loss and experimentally measured changes in the atomic structure resulting from variations in the level of TiO2 doping in TiO2-doped Ta2O5 coatings, in that increased homogeneity at the nearest-neighbour level appears to correlate with reduced mechanical loss. It is demonstrated that subtle but measurable changes in the nearest-neighbour homogeneity in an amorphous material can correlate with significant changes in macroscopic properties.</p>
In vitro antifungal activity of various persian cultivars of Punica granatum L. Extracts against Candida species
Background: Resistance of Candida species to antifungal agents has potentially serious implications for management of infections. Candida species are now the fourth most common organisms isolated from hospitalized patients. Prevention and control of these infections will require new antimicrobial agents. Plant-derived antifungal agents have always been a source of novel therapeutics. Objectives: The aim of this study was to investigate the antifungal effect of pomegranate peel and pulp extracts against Candida species. Materials and Methods: Pomegranate pulp and peel were dried and powdered separately. The dried powders were extracted using a soxhlet extractor. The antifungal effect of pomegranate peel and pulp extracts were determined in vitro by using the minimum inhibitory concentration (MIC) against five standard species, including Candida albicans (ATCC 10231), Candida parapsilosis (ATCC 22019), Candida tropicalis (ATCC 750), Candida glabrata (PTCC 5297) and Candida krusei (PTCC 5295). Results: Maximum inhibitions were attributed to peel extract of the pomegranate cultivar against Candida species. The greatest antifungal inhibition among the eight different cultivars was observed for sour malas, sour white peel and sour summer extracts respectively, against the five Candida strains. The antifungal activity of pulp extracts against Candida species was somewhat negative. Conclusions: Our work suggested that pomegranate (Punica granatum L.) peel has potential antifungal activity against Candidiasis, and it is an attractive option for the development of new management strategies for candidiasis. � 2015, School of Pharmacy, Ahvaz Jundishapur University of Medical Sciences
Cryogenic mechanical loss of a single-crystalline GaP coating layer for precision measurement applications
The first direct observations of gravitational waves have been made by the Advanced LIGO detectors.
However, the quest to improve the sensitivities of these detectors remains, and epitaxially grown single-crystal
coatings show considerable promise as alternatives to the ion-beam sputtered amorphous mirror
coatings typically used in these detectors and other such precision optical measurements. The mechanical
loss of a 1 μm thick single-crystalline gallium phosphide (GaP) coating, incorporating a buffer layer region
necessary for the growth of high quality epitaxial coatings, has been investigated over a broad range of
frequencies and with fine temperature resolution. It is shown that at 20 K the mechanical loss of GaP is a
factor of 40 less than an undoped tantala film heat-treated to 600 °C and is comparable to the loss of a
multilayer GaP/AlGaP coating. This is shown to translate into possible reductions in coating thermal noise
of a factor of 2 at 120 K and 5 at 20 K over the current best IBS coatings (alternating stacks of silica and
titania-doped tantala). There is also evidence of a thermally activated dissipation process between 50 and
70 K
Effect of heat treatment on mechanical dissipation in TaO coatings
Thermal noise arising from mechanical dissipation in dielectric reflective
coatings is expected to critically limit the sensitivity of precision
measurement systems such as high-resolution optical spectroscopy, optical
frequency standards and future generations of interferometric gravitational
wave detectors. We present measurements of the effect of post-deposition heat
treatment on the temperature dependence of the mechanical dissipation in
ion-beam sputtered tantalum pentoxide between 11\,K and 300\,K. We find the
temperature dependence of the dissipation is strongly dependent on the
temperature at which the heat treatment was carried out, and we have identified
three dissipation peaks occurring at different heat treatment temperatures. At
temperatures below 200\,K, the magnitude of the loss was found to increase with
higher heat treatment temperatures, indicating that heat treatment is a
significant factor in determining the level of coating thermal noise.Comment: accepted Classical and Quantum Gravity 201
Structure and morphology of low mechanical loss TiO₂-doped Ta₂O₅
The exceptional stability required from high finesse optical cavities and high precision interferometers is fundamentally limited by Brownian motion noise in the interference coatings of the cavity mirrors. In amorphous oxide coatings these thermally driven fluctuations are dominant in the high index layer compared to those in the low index SiO₂ layer in the stack. We present a systematic study of the evolution of the structural and optical properties of ion beam sputtered TiO₂-doped Ta₂O₅ films with annealing temperature. We show that low mechanical loss in TiO₂-doped Ta₂O₅ with a Ti cation ratio = 0.27 is associated with a material that consists of a homogeneous titanium-tantalum-oxygen mixture containing a low density of nanometer sized Ar-filled voids. When the Ti cation ratio is 0.53, phase separation occurs leading to increased mechanical loss. These results suggest that amorphous mixed oxides with low mechanical loss could be identified by considering the thermodynamics of ternary phase formation
- …