27 research outputs found
Effect of the grain diameter of Ni-based catalysts on their catalytic properties in the thermocatalytic decomposition of methanol
A stand-alone compact EUV microscope based on gas-puff target source
We report on a very compact desk-top transmission extreme ultraviolet (EUV) microscope based on a laser-plasma source with a double stream gas-puff target, capable of acquiring magnified images of objects with a spatial (half-pitch) resolution of sub-50 nm. A multilayer ellipsoidal condenser is used to focus and spectrally narrow the radiation from the plasma, producing a quasi-monochromatic EUV radiation (λ = 13.8 nm) illuminating the object, while a Fresnel zone plate objective forms the image. Design details, development, characterization and optimization of the EUV source and the microscope are described and discussed. Test object and other samples were imaged to demonstrate superior resolution compared to visible light microscopy.
Lay description
Developments in nanoscience demand tools capable of capturing images with a nanometer spatial resolution beyond the capability of well-known visible light microscopes.
Herein, we present the design details, development, characterization and optimization of a very compact desk-top transmission microscope, operating in invisible to an eye radiation from the so called extreme ultraviolet (EUV) range. The apparatus is based on a laser-plasma source coupled with a special type of objective called Fresnel zone plate. It is capable of acquiring magnified images of objects with a spatial resolution of sub-50 nm, approximately 5â10 times better than the spatial resolution of classical visible light microscopes, in a short acquisition time.
The main motivation for development of such compact systems operating with EUV radiations is the possibility to get information about thin samples due to the easily absorption of these radiation by solid materials with very small thicknesses, of the order of about 100 nm.
Additionally, the employment of such kind of microscopes might open the possibility to perform experiments without necessity to employ large âphoton facilitiesâ such as synchrotrons or free electron lasers and could have a huge impact on the speed of nanotechnology development.
Imaging results, concerning nanostructures and biomedical samples, are presented and discussed
Versailles project on advanced materials and standards (VAMAS) interlaboratory study on measuring the number concentration of colloidal gold nanoparticles
We describe the outcome of a large international interlaboratory study of the measurement of particle number concentration of colloidal nanoparticles, project 10 of the technical working area 34, "Nanoparticle Populations" of the Versailles Project on Advanced Materials and Standards (VAMAS). A total of 50 laboratories delivered results for the number concentration of 30 nm gold colloidal nanoparticles measured using particle tracking analysis (PTA), single particle inductively coupled plasma mass spectrometry (spICP-MS), ultraviolet-visible (UV-Vis) light spectroscopy, centrifugal liquid sedimentation (CLS) and small angle X-ray scattering (SAXS). The study provides quantitative data to evaluate the repeatability of these methods and their reproducibility in the measurement of number concentration of model nanoparticle systems following a common measurement protocol. We find that the population-averaging methods of SAXS, CLS and UV-Vis have high measurement repeatability and reproducibility, with between-labs variability of 2.6%, 11% and 1.4% respectively. However, results may be significantly biased for reasons including inaccurate material properties whose values are used to compute the number concentration. Particle-counting method results are less reproducibile than population-averaging methods, with measured between-labs variability of 68% and 46% for PTA and spICP-MS respectively. This study provides the stakeholder community with important comparative data to underpin measurement reproducibility and method validation for number concentration of nanoparticles
Bio-Based Materials versus Synthetic Polymers as a Support in Lipase Immobilization: Impact on Versatile Enzyme Activity
To improve enzyme stability, the immobilization process is often applied. The choice of a support on which the enzymes are adsorbed plays a major role in enhancing biocatalystsâ properties. In this study, bio-based (i.e., chitosan, coffee grounds) and synthetic (i.e., Lewatit VP OC 1600) supports were used in the immobilization of lipases of various microbial origins (yeast (Yarrowia lipolytica) and mold (Aspergillus oryzae)). The results confirmed that the enzyme proteins had been adsorbed on the surface of the selected carriers, but not all of them revealed comparably high catalytic activity. Immobilized CALB (Novozym 435) was used as a commercial reference biocatalyst. The best hydrolytic activity (higher than that of CALB) was observed for Novozym 51032 (lipase solution of A. oryzae) immobilized on Lewatit VP OC 1600. In terms of synthetic activity, there were only slight differences between the applied carriers for A. oryzae lipase, and the highest measures were obtained for coffee grounds. All of the biocatalysts had significantly lower activity in the synthesis reactions than the reference catalyst
Spectral Properties of Photo-Aligned Photonic Crystal Fibers Infiltrated with Gold Nanoparticle-Doped Ferroelectric Liquid Crystals
This paper describes our recent results on light propagation in photonic crystal fibers (PCFs) partially infiltrated with W212 ferroelectric liquid crystal (FLC) doped with 1–3 nm gold nanoparticles (NPs) with a concentration in the range of 0.1–0.5% wt. Based on our previous results devoted to PCFs infiltrated with nematic liquid crystals (NLCs) doped with gold NPs (GNPs), we extend our research line with FLCs doped with these NPs. To enhance the proper alignment of the NP-FLC nanocomposites inside PCFs, we applied an additional photo-aligning layer of SD-1 azo-dye material (DIC, Japan). Electro-optical response times and thermal tuning were studied in detail. We observed an improvement in response times for NP-FLC nanocomposites in comparison to the undoped FLC
Revisiting semicontinuous silver films as surface-enhanced Raman spectroscopy substrates
Surface-enhanced Raman spectroscopy (SERS) is a very promising analytical technique for the detection and identification of trace amounts of analytes. Among the many substrates used in SERS of great interest are nanostructures fabricated using physical methods, such as semicontinuous metal films obtained via electron beam physical vapor deposition. In these studies, we investigate the influence of morphology of semicontinuous silver films on their SERS properties. The morphologies studied ranged from isolated particles through percolated films to almost continuous films. We found that films below the percolation threshold (transition from dielectric-like to metal-like) made of isolated silver structures provided the largest SERS enhancement of 4-aminothiophenol (4-ATP) analyte signals. The substrate closest to the percolation threshold has the SERS signal about four times lower than the highest signal sample
Heterogeneous Carbon Gels: NâDoped Carbon Xerogels from Resorcinol and NâContaining Heterocyclic Aldehydes
Direct,
acid (HCl) initiated solâgel polycondensation of
resorcinol with pyrrole-2-carboxaldehyde or its derivative <i>N</i>-methyl-2-pyrrolecarboxaldehyde yields thermosetting phenolic
organic gels with N-content of up to 8.4 wt %. After carbonization,
sturdy monoliths of N-doped carbon xerogels with N-content of up to
8 wt % are produced. The morphology and porosity of the doped carbons
can be tuned by the solvent composition and the amount of polymerization
catalyst used. An increase in carbonization temperature from 600 to
1000 °C strongly affects the carbon gelsâ microporosity,
resulting in a decrease in N<sub>2</sub> adsorption capacity, but
a significant increase in H<sub>2</sub> adsorption capacity (at â196
°C). The growing H<sub>2</sub> sorption capacity with the decreasing
specific surface area (measured by N<sub>2</sub>) is related to the
gradual shrinkage of the carbon xerogel matrix and narrowing of the
small micropores. In addition, it is demonstrated that pyridine-based
heterocyclic aldehydes, that is, 2- or 4-pyridinecarboxaldehyde, condensate
with resorcinol in basic conditions (KOH, NH<sub>4</sub>OH). However,
in this case, monoliths cannot be produced and powders/rigid solid
precipitates are obtained instead. If NH<sub>4</sub>OH is used as
a solâgel polycondensation catalyst, N-doped foams are obtained
as a final carbonaceous product
Synthesis and characterization of noble metalâtitania coreâshell nanostructures with tunable shell thickness
Coreâshell nanostructures have found applications in many fields, including surface enhanced spectroscopy, catalysis and solar cells. Titania-coated noble metal nanoparticles, which combine the surface plasmon resonance properties of the core and the photoactivity of the shell, have great potential for these applications. However, the controllable synthesis of such nanostructures remains a challenge due to the high reactivity of titania precursors. Hence, a simple titania coating method that would allow better control over the shell formation is desired. A solâgel based titania coating method, which allows control over the shell thickness, was developed and applied to the synthesis of Ag@TiO2 and Au@TiO2 with various shell thicknesses. The morphology of the synthesized structures was investigated using scanning electron microscopy (SEM). Their sizes and shell thicknesses were determined using tunable resistive pulse sensing (TRPS) technique. The optical properties of the synthesized structures were characterized using UVâvis spectroscopy. Ag@TiO2 and Au@TiO2 structures with shell thickness in the range of â40â70 nm and 90 nm, for the Ag and Au nanostructures respectively, were prepared using a method we developed and adapted, consisting of a change in the titania precursor concentration. The synthesized nanostructures exhibited significant absorption in the UVâvis range. The TRPS technique was shown to be a very useful tool for the characterization of metalâmetal oxide coreâshell nanostructures
Virtual Reality for CSI Training
The EU-funded project, Real-Time On-Site Forensic Trace Qualification (RISEN) aims to enable the use of advanced sensors in the field in order to get results in near real-time. The project also aims to visualize the data by innovative means, such as in virtual reality (VR). The Swedish National Forensic Centre, NFC, has been developing methods for 3D modeling of crime scenes since 2016, and have conducted several studies in the use of VR for CSI application. This paper describes the status and possibilities with VR for CSI training and how the results from the RISEN project can be utilized within forensic training.</p
Thermo- and electro-optical properties of photonic liquid crystal fibers doped with gold nanoparticles
Thermo- and electro-optical properties of a photonic liquid crystal fiber (PLCF) enhanced by the use of dopants have been investigated. A 6CHBT nematic liquid crystal was doped with four different concentrations of gold nanoparticles (NPs), 0.1, 0.3, 0.5 and 1.0 wt %, for direct comparison of the influence of the dopant on the properties of the PLCF. The thermo-optical effects of the liquid crystal doped with gold NPs were compared in three setups, an LC cell, a microcapillary and within the PLCF, to determine if the observed responses to external factors are caused by the properties of the infiltration material or due to the setup configuration. The results obtained indicated that with increasing NP doping a significant reduction of the rise time under an external electric field occurs with a simultaneous decrease in the nematicâisotropic phase transition temperature, thus improving the thermo- and electro-optical properties of the PLCF