12,080 research outputs found
Data reduction in the ITMS system through a data acquisition model with self-adaptive sampling rate
Long pulse or steady state operation of fusion experiments require data acquisition and processing systems that reduce the volume of data involved. The availability of self-adaptive sampling rate systems and the use of real-time lossless data compression techniques can help solve these problems. The former is important for continuous adaptation of sampling frequency for experimental requirements. The latter allows the maintenance of continuous digitization under limited memory conditions. This can be achieved by permanent transmission of compressed data to other systems. The compacted transfer ensures the use of minimum bandwidth. This paper presents an implementation based on intelligent test and measurement system (ITMS), a data acquisition system architecture with multiprocessing capabilities that permits it to adapt the system’s sampling frequency throughout the experiment. The sampling rate can be controlled depending on the experiment’s specific requirements by using an external dc voltage signal or by defining user events through software. The system takes advantage of the high processing capabilities of the ITMS platform to implement a data reduction mechanism based in lossless data compression algorithms which are themselves based in periodic deltas
Eigenvalues of even very nice Toeplitz matrices can be unexpectedly erratic
It was shown in a series of recent publications that the eigenvalues of
Toeplitz matrices generated by so-called simple-loop symbols admit
certain regular asymptotic expansions into negative powers of . On the
other hand, recently two of the authors considered the pentadiagonal Toeplitz
matrices generated by the symbol , which does not satisfy
the simple-loop conditions, and derived asymptotic expansions of a more
complicated form. We here use these results to show that the eigenvalues of the
pentadiagonal Toeplitz matrices do not admit the expected regular asymptotic
expansion. This also delivers a counter-example to a conjecture by Ekstr\"{o}m,
Garoni, and Serra-Capizzano and reveals that the simple-loop condition is
essential for the existence of the regular asymptotic expansion.Comment: 28 pages, 7 figure
Numerical Simulation of III-V Solar Cells Using D-AMPS
Numerical simulation of devices plays a crucial role in their design, performance prediction, and comprehension of the fundamental phenomena ruling their operation. Here, we present results obtained using the code D-AMPS-1D, that was conveniently modified to consider the particularities of III-V solar cell devices. This work, that is a continuation of a previous paper regarding solar cells for space applications, is focused on solar cells structures than find application for terrestrial use under concentrated solar illumination. The devices were fabricated at the Solar Energy Institute of the Technical University of Madrid (UPM). The first simulations results on InGaP cells are presented. The influence of band offsets and band bending at the window-emitter interface on the quantum efficiency was studied. A remarkable match of the experimental quantum efficiency was obtained. Finally, numerical simulation of single junction n-p InGaP-Ge solar cells was performed
A versatile trigger and synchronization module with IEEE1588 capabilities and EPICS support.
Event timing and synchronization are two key aspects to improve in the implementation of distributed data acquisition (dDAQ) systems such as the ones used in fusion experiments. It is also of great importance the integration of dDAQ in control and measurement networks. This paper analyzes the applicability of the IEEE1588 and EPICS standards to solve these problems, and presents a hardware module implementation based in both of them that allow adding these functionalities to any DAQ. The IEEE1588 standard facilitates the integration of event timing and synchronization mechanisms in distributed data acquisition systems based on IEEE 803.3 (Ethernet). An optimal implementation of such system requires the use of network interface devices which include specific hardware resources devoted to the IEE1588 functionalities. Unfortunately, this is not the approach followed in most of the large number of applications available nowadays. Therefore, most solutions are based in software and use standard hardware network interfaces. This paper presents the development of a hardware module (GI2E) with IEEE1588 capabilities which includes USB, RS232, RS485 and CAN interfaces. This permits to integrate any DAQ element that uses these interfaces in dDAQ systems in an efficient and simple way. The module has been developed with Motorola's Coldfire MCF5234 processor and National Semiconductors's PHY DP83640T, providing it with the possibility to implement the PTP protocol of IEEE1588 by hardware, and therefore increasing its performance over other implementations based in software. To facilitate the integration of the dDAQ system in control and measurement networks the module includes a basic Input/Output Controller (IOC) functionality of the Experimental Physics and Industrial Control System (EPICS) architecture. The paper discusses the implementation details of this module and presents its applications in advanced dDAQ applications in the fusion community
Algunos aspectos en el arte dramático de Luis Enrique Osorio.
Algunos aspectos en el arte dramático de Luis Enrique Osorio
La voluntad rebelde en Carnaval afuera, carnaval adentro de René Marqués.
La voluntad rebelde en Carnaval afuera, carnaval adentro de René Marqués
- …