647 research outputs found
Improving the Technique of Scrambled Desserts Using the Food Supplement “Magnetofood”
For improving the technology of scrambled dessert products, a food supplement, based on the nanopowder of oxides of two- and trivalent iron “Magnetofood” was introduced in the recipe composition. The object of the studies is base recipes: one of mousse “Cranberry” and sambuk “Apple”. For determining technological characteristics and quality parameters, conventional standard methods were used.It has been established, that introduction of the food supplement “Magnetofood” in amount 0,1 %, 0,15 %, 0,2 % of the recipe mixture mass improves consumption properties of scrambled desserts. The mean value of the organoleptic analysis increases by (1,25±0,1) points. The density also decreases by (29±1) kg/m3 for mousses, by (26±1) kg/m3 for sambuks, and scrambling duration – by ~ 3 minutes. At storing during 24 hours at h=(90±2) %, the microbial contamination of the surface of samples decreases – QMAFAnM in 10 times, yeasts – in 2 times, molds – in 2 times.It has been established, that introduction of the supplement “Magnetofood” favors the growth of the foam-creating ability in average: by (40±2) % for mousses, by (55±3) % for sambuks. The porosity increases by (14,3±0,7) % for mousses, by (12,7±0, 6) % for sambuks. The foam structure stability of scrambled desserts improves by (14±1,1) %. The food supplement “Magnetofood” also raises the effective viscosity by (32 ±1) Pa·s for mousses and by (41±2) Pa·s for sambuks and the mechanical strength of scrambled desserts in 1,23 times.The highest parameters were inherited to mousses and sambuks with supplement “Magnetofood” mass share 0,15 %.There have been experimentally substantiated scrambling technological parameters and regimes of recipe mixtures of berry-fruit mousses and sambuks, modified by the food supplement “Magnetofood”. The total scrambling duration is (14–16) minutes. The initial scrambling speed of the berry-fruit base is (2,0–2,2) s-1, at that the scrambling time is (5–6)·60s. Then the recipe mixture is scrambled at speed (3,3–3,5) s-1 during (3–4)·60s. Scrambling is finished at speed (2,0–2,2) s-1. The distinctive feature of the improved technology is premixing of the food supplement “Magnetofood” with gelatin, realized before the technological operation of soaking gelatin in cold water.The obtained experimental data may be used at developing innovative technologies of scrambled dessert products with the food supplement “Magnetofood”
Recommendations on determination of interfacial tension at the interface between two fluids by the spinning drop method
There are studied popular methods of B. Vonnegut, H. Princen, J. Slattery, S. Torza for measuring the interfacial tension at the interface between two immiscible fluids by the spinning drop method. There is provided the method for calculating the geometric parameters of the spinning drop, and its results to the emergence of a spinning drop at the centre of the severely cylindrical area that correspond to the range of the ratio of the cube of the drop`s length to its volume of 24–120, and the range of the ratio of the spinning drop`s length to its diameter 4.00–0.35. Based on the obtained calculation results there is offered the method for determining the interfacial tension by using approximation dependence of the interfacial tension from the given drop volume, its length, difference in fluid densities and the
angular velocity of the drop rotation. There are assessed methodological errors of the offered and the known methods for determining interfacial tension according to the rotating drop method. A flow chart and the overall appearance of the device that
implements the proposed method for measuring the interfacial tension is presented
The effect of lipophilicity on the antibacterial activity of some 1-benzylbenzimidazole derivatives
In the present paper, the antibacterial activity of some 1-benzylbenzimidazole derivatives were evaluated against the Gram-negative bacteria Escherichia coli. The minimum inhibitory concentration was determined for all the compounds. Quantitative structure–activity relationship (QSAR) was employed to study the effect of the lipophilicity parameters (log P) on the inhibitory activity. Log P values for the target compounds were experimentally determined by the “shake-flask” method and calculated by using eight different software products. Multiple linear regression was used to correlate the log P values and antibacterial activity of the studied benzimidazole derivatives. The results are discussed based on statistical data. The most acceptable QSAR models for the prediction of the antibacterial activity of the investigated series of benzimidazoles were developed. High agreement between the experimental and predicted inhibitory values was obtained. The results of this study indicate that the lipophilicity parameter has a significant effect on the antibacterial activity of this class of compounds, which simplifies the design of new biologically active molecules
Quantitative structure-activity relationship of some 1-benzylbenzimidazole derivatives as antifungal agents
In the present study, the antifungal activity of some 1-benzylbenzimidazole derivatives against yeast Saccharomyces cerevisiae was investigated. The tested benzimidazoles displayed in vitro antifungal activity and minimum inhibitory concentration (MIC) was determined for all the compounds. Quantitative structure-activity relationship (QSAR) has been used to study the relationships between the antifungal activity and lipophilicity parameter, logP, calculated by using CS Chem-Office Software version 7.0. The results are discussed on the basis of statistical data. The best QSAR model for prediction of antifungal activity of the investigated series of benzimidazoles was developed. High agreement between experimental and predicted inhibitory values was obtained. The results of this study indicate that the lipophilicity parameter has a significant effect on antifungal activity of this class of compounds, which simplify design of new biologically active molecules
Homogeneous bubble nucleation limit of mercury under the normal working conditions of the planned European Spallation Source
In spallation neutron sources, liquid mercury is the subject of big thermal
and pressure shocks, upon adsorbing the proton beam. These changes can cause
unstable bubbles in the liquid, which can damage the structural material. While
there are methods to deal with the pressure shock, the local temperature shock
cannot be avoided. In our paper we calculated the work of the critical cluster
formation (i.e. for mercury micro-bubbles) together with the rate of their
formation (nucleation rate). It is shown that the homogeneous nucleation rates
are very low even after adsorbing several proton pulses, therefore the
probability of temperature induced homogeneous bubble nucleation is negligible.Comment: 22 Pages, 11 figures, one of them is colour, we plan to publish it in
Eur. Phys. J.
First observation of two hyperfine transitions in antiprotonic He-3
We report on the first experimental results for microwave spectroscopy of the
hyperfine structure of antiprotonic He-3. Due to the helium nuclear spin,
antiprotonic He-3 has a more complex hyperfine structure than antiprotonic He-4
which has already been studied before. Thus a comparison between theoretical
calculations and the experimental results will provide a more stringent test of
the three-body quantum electrodynamics (QED) theory. Two out of four
super-super-hyperfine (SSHF) transition lines of the (n,L)=(36,34) state were
observed. The measured frequencies of the individual transitions are
11.12559(14) GHz and 11.15839(18) GHz, less than 1 MHz higher than the current
theoretical values, but still within their estimated errors. Although the
experimental uncertainty for the difference of these frequencies is still very
large as compared to that of theory, its measured value agrees with theoretical
calculations. This difference is crucial to be determined because it is
proportional to the magnetic moment of the antiproton.Comment: 8 pages, 6 figures, just published (online so far) in Physics Letters
- …